Abstract: This study was carried out to investigate lamb mortalities relating to ewes' breed and some managemental factors on 250 pregnant ewes (190-Rahmani, 30-Ossimi and 30-Romanov) at Mehallet Mousa, Animal Production Research Station, Kafr El- Sheikh Province, Egypt. These animals divided into five groups according to the managemental factors used. The results revealed that the lamb mortality was higher in Ossimi breed and lower in Romanov one. In addition, the highest lamb mortality occurred among lambs for unsupplemented ewes, for those had body condition score two and for lambs which born outdoor. Moreover, the lamb survivability was increased by the parity of ewes. From this study it can be concluded that the lamb mortality depends on ewes' body condition score, parity, lambing system (indoor or outdoor), nutrition during pregnancy period and selected breed. In addition, the most important period for lamb survival is the first week of age.
Abstract: Evaporator is an important and widely used heat
exchanger in air conditioning and refrigeration industries. Different
methods have been used by investigators to increase the heat transfer
rates in evaporators. One of the passive techniques to enhance heat
transfer coefficient is the application of microfin tubes. The
mechanism of heat transfer augmentation in microfin tubes is
dependent on the flow regime of two-phase flow. Therefore many
investigations of the flow patterns for in-tube evaporation have been
reported in literatures. The gravitational force, surface tension and
the vapor-liquid interfacial shear stress are known as three dominant
factors controlling the vapor and liquid distribution inside the tube. A
review of the existing literature reveals that the previous
investigations were concerned with the two-phase flow pattern for
flow boiling in horizontal tubes [12], [9]. Therefore, the objective of
the present investigation is to obtain information about the two-phase
flow patterns for evaporation of R-134a inside horizontal smooth and
microfin tubes. Also Investigation of heat transfer during flow
boiling of R-134a inside horizontal microfin and smooth tube have
been carried out experimentally The heat transfer coefficients for
annular flow in the smooth tube is shown to agree well with Gungor
and Winterton-s correlation [4]. All the flow patterns occurred in the
test can be divided into three dominant regimes, i.e., stratified-wavy
flow, wavy-annular flow and annular flow. Experimental data are
plotted in two kinds of flow maps, i.e., Weber number for the vapor
versus weber number for the liquid flow map and mass flux versus
vapor quality flow map. The transition from wavy-annular flow to
annular or stratified-wavy flow is identified in the flow maps.
Abstract: Pipeline ADCs are becoming popular at high speeds
and with high resolution. This paper discusses the options of number
of bits/stage conversion techniques in pipelined ADCs and their
effect on Area, Speed, Power Dissipation and Linearity. The basic
building blocks like op-amp, Sample and Hold Circuit, sub converter,
DAC, Residue Amplifier used in every stage is assumed to be
identical. The sub converters use flash architectures. The design is
implemented using 0.18
Abstract: Successive event of explosion earthquake and harmonic tremor recorded at Semeru volcano were analyzed to investigate the dynamical system regarding to their eruptive mechanism. The eruptive activity at Semeru volcano East Java, Indonesia is intermittent emission of ash and bombs with Strombolian style which occurred at interval of 15 to 45 minutes. The explosive eruptions accompanied by explosion earthquakes and followed by volcanic tremor which generated by continuous emission of volcanic ash. The spectral and Lyapunov exponent of successive event of explosion and harmonic tremor were analyzed. Peak frequencies of explosion earthquakes range 1.2 to 1.9 Hz and those of the harmonic tremor have peak frequency range 1.5 — 2.2 Hz. The phase space is reconstructed and evaluated based on the Lyapunov exponents. Harmonic tremors have smaller Lyapunov exponent than explosion earthquakes. It can be considerably as correlated complexity of the mechanism from the variance of spectral and fractal dimension and can be concluded that the successive event of harmonic tremor and explosions are chaotic.
Abstract: Equipment miniaturisation offers several opportunities such as an increased surface-to-volume ratio and higher heat transfer coefficients. However, moving towards small-diameter channels demands extra attention to fouling, reliability and stable operation of the system. The present investigation explores possibilities to enhance the stability of the once-through micro evaporator by reducing its flow boiling induced pressure fluctuations. Experimental comparison shows that the measured reduction factor approaches a theoretically derived value. Pressure fluctuations are reduced by a factor of ten in the solid conical channel and a factor of 15 in the porous conical channel. This presumably leads to less backflow and therefore to a better flow control.
Abstract: The occurrence of missing values in database is a serious problem for Data Mining tasks, responsible for degrading data quality and accuracy of analyses. In this context, the area has shown a lack of standardization for experiments to treat missing values, introducing difficulties to the evaluation process among different researches due to the absence in the use of common parameters. This paper proposes a testbed intended to facilitate the experiments implementation and provide unbiased parameters using available datasets and suited performance metrics in order to optimize the evaluation and comparison between the state of art missing values treatments.
Abstract: In practice, wireless networks has the property that
the signal strength attenuates with respect to the distance from the
base station, it could be better if the nodes at two hop away are
considered for better quality of service. In this paper, we propose a
procedure to identify delay preserving substructures for a given
wireless ad-hoc network using a new graph operation G 2 – E (G) =
G* (Edge difference of square graph of a given graph and the
original graph). This operation helps to analyze some induced
substructures, which preserve delay in communication among them.
This operation G* on a given graph will induce a graph, in which 1-
hop neighbors of any node are at 2-hop distance in the original
network. In this paper, we also identify some delay preserving
substructures in G*, which are (i) set of all nodes, which are mutually
at 2-hop distance in G that will form a clique in G*, (ii) set of nodes
which forms an odd cycle C2k+1 in G, will form an odd cycle in G*
and the set of nodes which form a even cycle C2k in G that will form
two disjoint companion cycles ( of same parity odd/even) of length k
in G*, (iii) every path of length 2k+1 or 2k in G will induce two
disjoint paths of length k in G*, and (iv) set of nodes in G*, which
induces a maximal connected sub graph with radius 1 (which
identifies a substructure with radius equal 2 and diameter at most 4 in
G). The above delay preserving sub structures will behave as good
clusters in the original network.
Abstract: This paper presents a novel algorithm for path planning of mobile robots in known 3D environments using Binary Integer Programming (BIP). In this approach the problem of path planning is formulated as a BIP with variables taken from 3D Delaunay Triangulation of the Free Configuration Space and solved to obtain an optimal channel made of connected tetrahedrons. The 3D channel is then partitioned into convex fragments which are used to build safe and short paths within from Start to Goal. The algorithm is simple, complete, does not suffer from local minima, and is applicable to different workspaces with convex and concave polyhedral obstacles. The noticeable feature of this algorithm is that it is simply extendable to n-D Configuration spaces.
Abstract: Since supply chains highly impact the financial
performance of companies, it is important to optimize and analyze
their Key Performance Indicators (KPI). The synergistic combination
of Particle Swarm Optimization (PSO) and Monte Carlo simulation is
applied to determine the optimal reorder point of warehouses in
supply chains. The goal of the optimization is the minimization of the
objective function calculated as the linear combination of holding and
order costs. The required values of service levels of the warehouses
represent non-linear constraints in the PSO. The results illustrate that
the developed stochastic simulator and optimization tool is flexible
enough to handle complex situations.
Abstract: This paper presents the modeling of a MEMS based accelerometer in order to detect the presence of a wheel flat in the railway vehicle. A haversine wheel flat is assigned to one wheel of a 5 DOF pitch plane vehicle model, which is coupled to a 3 layer track model. Based on the simulated acceleration response obtained from the vehicle-track model, an accelerometer is designed that meets all the requirements to detect the presence of a wheel flat. The proposed accelerometer can survive in a dynamic shocking environment with acceleration up to ±150g. The parameters of the accelerometer are calculated in order to achieve the required specifications using lumped element approximation and the results are used for initial design layout. A finite element analysis code (COMSOL) is used to perform simulations of the accelerometer under various operating conditions and to determine the optimum configuration. The simulated results are found within about 2% of the calculated values, which indicates the validity of lumped element approach. The stability of the accelerometer is also determined in the desired range of operation including the condition under shock.
Abstract: Many works have been carried out to compare the
efficiency of several goodness of fit procedures for identifying
whether or not a particular distribution could adequately explain a
data set. In this paper a study is conducted to investigate the power
of several goodness of fit tests such as Kolmogorov Smirnov (KS),
Anderson-Darling(AD), Cramer- von- Mises (CV) and a proposed
modification of Kolmogorov-Smirnov goodness of fit test which
incorporates a variance stabilizing transformation (FKS). The
performances of these selected tests are studied under simple
random sampling (SRS) and Ranked Set Sampling (RSS). This
study shows that, in general, the Anderson-Darling (AD) test
performs better than other GOF tests. However, there are some
cases where the proposed test can perform as equally good as the
AD test.
Abstract: Preliminary results for a new flat plate test
facility are presented here in the form of Computational Fluid Dynamics (CFD), flow visualisation, pressure measurements and thermal anemometry. The results from the CFD and flow
visualisation show the effectiveness of the plate design, with the trailing edge flap anchoring the stagnation point on the working surface and reducing the extent of the leading edge separation. The flow visualization technique demonstrates the
two-dimensionality of the flow in the location where the
thermal anemometry measurements are obtained.
Measurements of the boundary layer mean velocity profiles compare favourably with the Blasius solution, thereby allowing for comparison of future measurements with the
wealth of data available on zero pressure gradient Blasius
flows. Results for the skin friction, boundary layer thickness,
frictional velocity and wall shear stress are shown to agree well with the Blasius theory, with a maximum experimental deviation from theory of 5%. Two turbulence generating grids
have been designed and characterized and it is shown that the turbulence decay downstream of both grids agrees with established correlations. It is also demonstrated that there is
little dependence of turbulence on the freestream velocity.
Abstract: Integrated Total Quality Management (TQM) with
Lean Manufacturing (LM) is a system comprises of TQM with LM
principles and is associated with financial and nonfinancial
performance measurement indicators. The ultimate goal of this
system is to focus on achieving total customer satisfaction by
removing eight wastes available in any process in an organization.
A survey questionnaire was developed and distributed to 30 highly
active automotive vendors in Malaysia and analyzed by PASW
Statistics 18. It was found out that these vendors have been
practicing and measuring the effectiveness TQM and LM
implementation. More involvement of all Malaysian automotive
vendors will represent the exact status of current Malaysian
automotive industry in implementing TQM and LM and can
determine whether the industry is ready for integrated TQM and
LM system. This is the first study that combined 4 awards
practices, ISO/TS16949, Toyota Production System and
SAEJ4000.
Abstract: The manufacturing transmission line tower parts has
being generated hazardous waste which is required proper disposal
of waste for protection of land pollution. Manufacturing Process in
the manufacturing of steel angle, plates, pipes, channels are passes
through conventional, semi automatic and CNC machines for
cutting, marking, punching, drilling, notching, bending operations.
All fabricated material Coated with thin layer of Zinc in Galvanizing
plant where molten zinc is used for coating. Prior to Galvanizing,
chemical like 33% concentrated HCl Acid, ammonium chloride and
d-oil being used for pretreatment of iron. The bath of water with
sodium dichromate is used for cooling and protection of the
galvanized steel. For the heating purpose the furnace oil burners are
used. These above process the Zinc dross, Zinc ash, ETP sludge and
waste pickled acid generated as hazardous waste. The RPG has
made captive secured land fill site, since 1997 since then it was
using for disposal of hazardous waste after completion of SLF
(Secured land fill) site. The RPG has raised height from ground
level then now it is being used for disposal of waste as he designed
the SLF after in creasing height of from GL it is functional without
leach ate or adverse impacts in the environment.
Abstract: This research is designed for helping a WAPbased mobile phone-s user in order to analyze of logistics in the traffic area by applying and designing the accessible processes from mobile user to server databases. The research-s design comprises Mysql 4.1.8-nt database system for being the server which there are three sub-databases, traffic light – times of intersections in periods of the day, distances on the road of area-blocks where are divided from the main sample-area and speeds of sample vehicles (motorcycle, personal car and truck) in periods of the day. For interconnections between the server and user, PHP is used to calculate distances and travelling times from the beginning point to destination, meanwhile XHTML applied for receiving, sending and displaying data from PHP to user-s mobile. In this research, the main sample-area is focused at the Huakwang-Ratchada-s area, Bangkok, Thailand where usually the congested point and 6.25 km2 surrounding area which are split into 25 blocks, 0.25 km2 for each. For simulating the results, the designed server-database and all communicating models of this research have been uploaded to www.utccengineering.com/m4tg and used the mobile phone which supports WAP 2.0 XHTML/HTML multimode browser for observing values and displayed pictures. According to simulated results, user can check the route-s pictures from the requiring point to destination along with analyzed consuming times when sample vehicles travel in various periods of the day.
Abstract: Quality costs are the costs associated with preventing,
finding, and correcting defective work. Since the main language of
corporate management is money, quality-related costs act as means of
communication between the staff of quality engineering departments
and the company managers. The objective of quality engineering is to
minimize the total quality cost across the life of product. Quality
costs provide a benchmark against which improvement can be
measured over time. It provides a rupee-based report on quality
improvement efforts. It is an effective tool to identify, prioritize and
select quality improvement projects. After reviewing through the
literature it was noticed that a simplified methodology for data
collection of quality cost in a manufacturing industry was required.
The quantified standard methodology is proposed for collecting data
of various elements of quality cost categories for manufacturing
industry. Also in the light of research carried out so far, it is felt
necessary to standardise cost elements in each of the prevention,
appraisal, internal failure and external failure costs. . Here an attempt
is made to standardise the various cost elements applicable to
manufacturing industry and data is collected by using the proposed
quantified methodology. This paper discusses the case study carried
in luggage manufacturing industry.
Abstract: Nowadays social media are important tools for web
resource discovery. The performance and capabilities of web searches
are vital, especially search results from social research paper
bookmarking. This paper proposes a new algorithm for ranking
method that is a combination of similarity ranking with paper posted
time or CSTRank. The paper posted time is static ranking for
improving search results. For this particular study, the paper posted
time is combined with similarity ranking to produce a better ranking
than other methods such as similarity ranking or SimRank. The
retrieval performance of combination rankings is evaluated using
mean values of NDCG. The evaluation in the experiments implies
that the chosen CSTRank ranking by using weight score at ratio 90:10
can improve the efficiency of research paper searching on social
bookmarking websites.
Abstract: Electronic Systems are the core of everyday lives.
They form an integral part in financial networks, mass transit,
telephone systems, power plants and personal computers. Electronic
systems are increasingly based on complex VLSI (Very Large Scale
Integration) integrated circuits. Initial electronic design automation is
concerned with the design and production of VLSI systems. The next
important step in creating a VLSI circuit is Physical Design. The
input to the physical design is a logical representation of the system
under design. The output of this step is the layout of a physical
package that optimally or near optimally realizes the logical
representation. Physical design problems are combinatorial in nature
and of large problem sizes. Darwin observed that, as variations are
introduced into a population with each new generation, the less-fit
individuals tend to extinct in the competition of basic necessities.
This survival of fittest principle leads to evolution in species. The
objective of the Genetic Algorithms (GA) is to find an optimal
solution to a problem .Since GA-s are heuristic procedures that can
function as optimizers, they are not guaranteed to find the optimum,
but are able to find acceptable solutions for a wide range of
problems. This survey paper aims at a study on Efficient Algorithms
for VLSI Physical design and observes the common traits of the
superior contributions.
Abstract: Functional imaging procedures for the non-invasive assessment of tissue microcirculation are highly requested, but require a mathematical approach describing the trans- and intercapillary passage of tracer particles. Up to now, two theoretical, for the moment different concepts have been established for tracer kinetic modeling of contrast agent transport in tissues: pharmacokinetic compartment models, which are usually written as coupled differential equations, and the indicator dilution theory, which can be generalized in accordance with the theory of lineartime- invariant (LTI) systems by using a convolution approach. Based on mathematical considerations, it can be shown that also in the case of an open two-compartment model well-known from functional imaging, the concentration-time course in tissue is given by a convolution, which allows a separation of the arterial input function from a system function being the impulse response function, summarizing the available information on tissue microcirculation. Due to this reason, it is possible to integrate the open two-compartment model into the system-theoretic concept of indicator dilution theory (IDT) and thus results known from IDT remain valid for the compartment approach. According to the long number of applications of compartmental analysis, even for a more general context similar solutions of the so-called forward problem can already be found in the extensively available appropriate literature of the seventies and early eighties. Nevertheless, to this day, within the field of biomedical imaging – not from the mathematical point of view – there seems to be a trench between both approaches, which the author would like to get over by exemplary analysis of the well-known model.
Abstract: In this project electrical and optical properties of
BaZrO3 have been accomplished through the full-potential
linear augmented plane wave (FP-LAPW) by applying Wein2k
software. In this study band structure, density of state, gap energy,
refractive index and optical conduction have been studied. The results
of calculations show that BaZrO3 is an insulator with an indirect gap
in which 3.2 ev and studied refractive index equal 2.07. These results
are in accordance with the ones obtained in experimental researches.