Abstract: The paper focuses on the implementation phase of the
strategy of the European Union and the national strategy of the
Czech Republic to promote academic and research staff with the
potential to produce results that provide innovation useful for
economic growth. It deals with the use of financial resources of the
Operational Program Education for Competitiveness at the
University of West Bohemia in Pilsen. The author presents an
example of two strategic projects in the field of human resources –
Excellence in Human Resources as a Source of Competitiveness and
New Excellence of Human Resources. The subject of this paper is the
potential contribution of newly recruited postdoctoral within these
projects for the University of West Bohemia in Pilsen and its internal
environment.
Abstract: In Thailand, both the 1997 and the current 2007 Thai Constitutions have mentioned the establishment of independent organizations as a new mechanism to play a key role in proposing policy recommendations to national decision-makers in the interest of collective consumers. Over the last ten years, no independent organizations have yet been set up. Evidently, nobody could point out who should be key players in establishing provincial independent consumer bodies. The purpose of this study was to find definitive stakeholders in establishing and developing independent consumer bodies in a Thai context. This was a cross-sectional study between August and September 2007, using a postal questionnaire with telephone follow-up. The questionnaire was designed and used to obtain multiple stakeholder assessment of three key attributes (power, interest and influence). Study population was 153 stakeholders associated with policy decision-making, formulation and implementation processes of civil-based consumer protection in pilot provinces. The population covered key representatives from five sectors (academics, government officers, business traders, mass media and consumer networks) who participated in the deliberative forums at 10 provinces. A 49.7% response rate was achieved. Data were analyzed, comparing means of three stakeholder attributes and classification of stakeholder typology. The results showed that the provincial health officers were the definitive stakeholders as they had legal power, influence and interest in establishing and sustaining the independent consumer bodies. However, only a few key representatives of the provincial health officers expressed their own paradigm on the civil-based consumer protection. Most provincial health officers put their own standpoint of building civic participation at only a plan-implementation level. For effective policy implementation by the independent consumer bodies, the Thai government should provide budgetary support for the operation of the provincial health officers with their paradigm shift as well as their own clarified standpoint on corporate governance.
Abstract: Security risk models have been successful in estimating the likelihood of attack for simple security threats. However, modeling complex system and their security risk is even a challenge. Many methods have been proposed to face this problem. Often difficult to manipulate, and not enough all-embracing they are not as famous as they should with administrators and deciders. We propose in this paper a new tool to model big systems on purpose. The software, takes into account attack threats and security strength.
Abstract: Most parts of the world such as Iran are facing the excessive consumption of fertilizers, that are used to achieve high yield, but increase the cost of production of fertilizer and degradation of soil and water resources. This experiment was carried out to study the effect of PGPR and planting pattern on yield and yield components of rice (Oryza sativa L.) using split plot based on randomized complete block design with three replications in Ilam province, Iran. Bio-fertilizer including Azotobacter, Nitroxin and control treatment (without consumption) were designed as a main plot and planting pattern including 15 × 10, 15 × 15 and 15 × 20 and the number of plant in hill including 3, 4 and 5 plants in hill were considered as a sub-plots. The results showed that the effect of bio-fertilizers, planting pattern and the number of plants in hill were significant affect on yield and yield components. Interaction effect between bio-fertilizer and planting pattern had important difference on the number spikelet of panicle and harvest index. Interaction effect between bio-fertilizer and the number of plants in hill were significant affect on the number of spikelet per panicle. The maximum grain yield was obtained by inoculation with Nitroxin, planting pattern of 15 × 15 and 4 plants in hill with mean of 1110.6 g.m-2, 959.9 g.m-2 and 928.4 g.m-2, respectively.
Abstract: A study was conducted in greenhouse environment to
determine the response of five tissue-cultured date palm cultivars, Al-
Ahamad, Nabusaif, Barhee, Khalas, and Kasab to irrigation water
salinity of 1.6, 5, 10, or 20 dS/ m. The salinity level of 1.6dS/m, was
used as a control. The effects of high salinity on plant survival were
manifested at 360 days after planting (DAP) onwards. Three
cultivars, Khalas, Kasab and Barhee were able to tolerate 10 dS/m
salinity level at 24 months after the start of study. Khalas tolerated
the highest salinity level of 20 dS/ m and 'Nabusaif' was found to be the
least tolerant cv. The average heights of palms and the number of
fronds were decreased with increasing salinity levels as time
progressed.
Abstract: Copper based composites reinforced with WC and Ti
particles were prepared using planetary ball-mill. The experiment
was designed by using Taguchi technique and milling was carried out
in an air for several hours. The powder was characterized before and
after milling using the SEM, TEM and X-ray for microstructure and
for possible new phases. Microstructures show that milled particles
size and reduction in particle size depend on many parameters. The
distance d between planes of atoms estimated from X-ray powder
diffraction data and TEM image. X-ray diffraction patterns of the
milled powder did not show clearly any new peak or energy shift, but
the TEM images show a significant change in crystalline structure of
corporate on titanium in the composites.
Abstract: In this paper we present an off line system for the
recognition of the handwritten numeric chains. Our work is divided
in two big parts. The first part is the realization of a recognition
system of the isolated handwritten digits. In this case the study is
based mainly on the evaluation of neural network performances,
trained with the gradient back propagation algorithm. The used
parameters to form the input vector of the neural network are
extracted on the binary images of the digits by several methods: the
distribution sequence, the Barr features and the centred moments of
the different projections and profiles. The second part is the
extension of our system for the reading of the handwritten numeric
chains constituted of a variable number of digits. The vertical
projection is used to segment the numeric chain at isolated digits and
every digit (or segment) will be presented separately to the entry of
the system achieved in the first part (recognition system of the
isolated handwritten digits). The result of the recognition of the
numeric chain will be displayed at the exit of the global system.
Abstract: This paper focuses on a critical component of the situational awareness (SA), the control of autonomous vertical flight for tactical unmanned aerial vehicle (TUAV). With the SA strategy, we proposed a two stage flight control procedure using two autonomous control subsystems to address the dynamics variation and performance requirement difference in initial and final stages of flight trajectory for an unmanned helicopter model with coaxial rotor and ducted fan configuration. This control strategy for chosen model of TUAV has been verified by simulation of hovering maneuvers using software package Simulink and demonstrated good performance for fast stabilization of engines in hovering, consequently, fast SA with economy in energy can be asserted during search-and-rescue operations.
Abstract: This study investigates the performance of radial basis function networks (RBFN) in forecasting the monthly CO2 emissions of an electric power utility. We also propose a method for input variable selection. This method is based on identifying the general relationships between groups of input candidates and the output. The effect that each input has on the forecasting error is examined by removing all inputs except the variable to be investigated from its group, calculating the networks parameter and performing the forecast. Finally, the new forecasting error is compared with the reference model. Eight input variables were identified as the most relevant, which is significantly less than our reference model with 30 input variables. The simulation results demonstrate that the model with the 8 inputs selected using the method introduced in this study performs as accurate as the reference model, while also being the most parsimonious.
Abstract: A dead leg is a typical subsea production system
component. CFD is required to model heat transfer within the dead
leg. Unfortunately its solution is time demanding and thus not
suitable for fast prediction or repeated simulations. Therefore there is
a need to create a thermal FEA model, mimicking the heat flows and
temperatures seen in CFD cool down simulations.
This paper describes the conventional way of tuning and a new
automated way using parametric model order reduction (PMOR)
together with an optimization algorithm. The tuned FE analyses
replicate the steady state CFD parameters within a maximum error in
heat flow of 6 % and 3 % using manual and PMOR method
respectively. During cool down, the relative error of the tuned FEA
models with respect to temperature is below 5% comparing to the
CFD. In addition, the PMOR method obtained the correct FEA setup
five times faster than the manually tuned FEA.
Abstract: The cup method is applied for the measurement of water vapor transport properties of porous materials worldwide. However, in practical applications the experimental results are often used without taking into account some secondary effects which can play an important role under specific conditions. In this paper, the effect of temperature on water vapor transport properties of cellular concrete is studied, together with the influence of sample thickness. At first, the bulk density, matrix density, total open porosity and sorption and desorption isotherms are measured for material characterization purposes. Then, the steady state cup method is used for determination of water vapor transport properties, whereas the measurements are performed at several temperatures and for three different sample thicknesses.
Abstract: Free Hemoglobin promotes the accumulation of
hydroxyl radicals by the heme iron, which can react with endogenous
hydrogen peroxide to produce free radicals which may cause severe
oxidative cell damage. Haptoglobin binds to Hemoglobin strongly
and Haptoglobin-Hemoglobin binding is irreversible. Peroxidase
activity of Haptoglobin(2-2)-Hemoglobin complex was assayed by
following increase of absorption of produced tetraguaiacol as the
second substrate of Haptoglobin-Hemoglobin complex at 470 nm and
42°C by UV-Vis spectrophotometer. The results have shown that
peroxidase activity of Haptoglobin(2-2)-Hemoglobin complex is
modulated via homotropic effect of hydrogen peroxide as allostric
substrate. On the other hand antioxidant property of Haptoglobin(2-
2)-Hemoglobin was increased via heterotropic effect of the two drugs
(especially ampicillin) on peroxidase activity of the complex. Both
drugs also have mild effect on quality of homotropic property of
peroxidase activity of Haptoglobin(2-2)-Hemoglobin complex.
Therefore, in vitro studies show that the two drugs may help Hp-Hb
complex to remove hydrogen peroxide from serum at pathologic
temperature ature (42 C).
Abstract: In the world of Peer-to-Peer (P2P) networking
different protocols have been developed to make the resource sharing
or information retrieval more efficient. The SemPeer protocol is a
new layer on Gnutella that transforms the connections of the nodes
based on semantic information to make information retrieval more
efficient. However, this transformation causes high clustering in the
network that decreases the number of nodes reached, therefore the
probability of finding a document is also decreased. In this paper we
describe a mathematical model for the Gnutella and SemPeer
protocols that captures clustering-related issues, followed by a
proposition to modify the SemPeer protocol to achieve moderate
clustering. This modification is a sort of link management for the
individual nodes that allows the SemPeer protocol to be more
efficient, because the probability of a successful query in the P2P
network is reasonably increased. For the validation of the models, we
evaluated a series of simulations that supported our results.
Abstract: Software project effort estimation is frequently seen
as complex and expensive for individual software engineers.
Software production is in a crisis. It suffers from excessive costs.
Software production is often out of control. It has been suggested that
software production is out of control because we do not measure.
You cannot control what you cannot measure. During last decade, a
number of researches on cost estimation have been conducted. The
metric-set selection has a vital role in software cost estimation
studies; its importance has been ignored especially in neural network
based studies. In this study we have explored the reasons of those
disappointing results and implemented different neural network
models using augmented new metrics. The results obtained are
compared with previous studies using traditional metrics. To be able
to make comparisons, two types of data have been used. The first
part of the data is taken from the Constructive Cost Model
(COCOMO'81) which is commonly used in previous studies and the
second part is collected according to new metrics in a leading
international company in Turkey. The accuracy of the selected
metrics and the data samples are verified using statistical techniques.
The model presented here is based on Multi-Layer Perceptron
(MLP). Another difficulty associated with the cost estimation studies
is the fact that the data collection requires time and care. To make a
more thorough use of the samples collected, k-fold, cross validation
method is also implemented. It is concluded that, as long as an
accurate and quantifiable set of metrics are defined and measured
correctly, neural networks can be applied in software cost estimation
studies with success
Abstract: One of the main trouble in a steel strip manufacturing
line is the breakage of whatever weld carried out between steel coils,
that are used to produce the continuous strip to be processed. A weld
breakage results in a several hours stop of the manufacturing line. In
this process the damages caused by the breakage must be repaired.
After the reparation and in order to go on with the production it will
be necessary a restarting process of the line. For minimizing this
problem, a human operator must inspect visually and manually each
weld in order to avoid its breakage during the manufacturing process.
The work presented in this paper is based on the Bayesian decision
theory and it presents an approach to detect, on real-time, steel strip
defective welds. This approach is based on quantifying the tradeoffs
between various classification decisions using probability and the
costs that accompany such decisions.
Abstract: ''Cocktail party problem'' is well known as one of the human auditory abilities. We can recognize the specific sound that we want to listen by this ability even if a lot of undesirable sounds or noises are mixed. Blind source separation (BSS) based on independent component analysis (ICA) is one of the methods by which we can separate only a special signal from their mixed signals with simple hypothesis. In this paper, we propose an online approach for blind source separation using the sliding DFT and the time domain independent component analysis. The proposed method can reduce calculation complexity in comparison with conventional methods, and can be applied to parallel processing by using digital signal processors (DSPs) and so on. We evaluate this method and show its availability.
Abstract: The influence of eccentric discharge of stored solids in
squat silos has been highly valued by many researchers. However,
calculation method of lateral pressure under eccentric flowing still
needs to be deeply studied. In particular, the lateral pressure
distribution on vertical wall could not be accurately recognized
mainly because of its asymmetry. In order to build mechanical model
of lateral pressure, flow channel and flow pattern of stored solids in
squat silo are studied. In this passage, based on Janssen-s theory, the
method for calculating lateral static pressure in squat silos after
eccentric discharge is proposed. Calculative formulae are deduced for
each of three possible cases. This method is also focusing on
unsymmetrical distribution characteristic of silo wall normal
pressure. Finite element model is used to analysis and compare the
results of lateral pressure and the numerical results illustrate the
practicability of the theoretical method.
Abstract: The present study was designed to test the influence
of confirmed expectations, perceived usefulness and perceived
competence on e-learning satisfaction among university teachers. A
questionnaire was completed by 125 university teachers from 12
different universities in Norway. We found that 51% of the variance
in university teachers- satisfaction with e-learning could be explained
by the three proposed antecedents. Perceived usefulness seems to be
the most important predictor of teachers- satisfaction with e-learning.
Abstract: Clustering is the process of subdividing an input data set into a desired number of subgroups so that members of the same subgroup are similar and members of different subgroups have diverse properties. Many heuristic algorithms have been applied to the clustering problem, which is known to be NP Hard. Genetic algorithms have been used in a wide variety of fields to perform clustering, however, the technique normally has a long running time in terms of input set size. This paper proposes an efficient genetic algorithm for clustering on very large data sets, especially on image data sets. The genetic algorithm uses the most time efficient techniques along with preprocessing of the input data set. We test our algorithm on both artificial and real image data sets, both of which are of large size. The experimental results show that our algorithm outperforms the k-means algorithm in terms of running time as well as the quality of the clustering.
Abstract: This paper considers various channels of gammaquantum
generation via an ultra-short high-power laser pulse
interaction with different targets.We analyse the possibilities to create
a pulsed gamma-radiation source using laser triggering of some
nuclear reactions and isomer targets. It is shown that sub-MeV
monochromatic short pulse of gamma-radiation can be obtained with
pulse energy of sub-mJ level from isomer target irradiated by intense
laser pulse. For nuclear reaction channel in light- atom materials, it is
shown that sub-PW laser pulse gives rise to formation about million
gamma-photons of multi-MeV energy.