Abstract: This paper presents an algorithm of particle swarm
optimization with reduction for global optimization problems. Particle
swarm optimization is an algorithm which refers to the collective
motion such as birds or fishes, and a multi-point search algorithm
which finds a best solution using multiple particles. Particle
swarm optimization is so flexible that it can adapt to a number
of optimization problems. When an objective function has a lot of
local minimums complicatedly, the particle may fall into a local
minimum. For avoiding the local minimum, a number of particles are
initially prepared and their positions are updated by particle swarm
optimization. Particles sequentially reduce to reach a predetermined
number of them grounded in evaluation value and particle swarm
optimization continues until the termination condition is met. In order
to show the effectiveness of the proposed algorithm, we examine the
minimum by using test functions compared to existing algorithms.
Furthermore the influence of best value on the initial number of
particles for our algorithm is discussed.
Abstract: In any trust model, the two information sources that a peer relies on to predict trustworthiness of another peer are direct experience as well as reputation. These two vital components evolve over time. Trust evolution is an important issue, where the objective is to observe a sequence of past values of a trust parameter and determine the future estimates. Unfortunately, trust evolution algorithms received little attention and the proposed algorithms in the literature do not comply with the conditions and the nature of trust. This paper contributes to this important problem in the following ways: (a) presents an algorithm that manages and models trust evolution in a P2P environment, (b) devises new mechanisms for effectively maintaining trust values based on the conditions that influence trust evolution , and (c) introduces a new methodology for incorporating trust-nurture incentives into the trust evolution algorithm. Simulation experiments are carried out to evaluate our trust evolution algorithm.
Abstract: the data of Taiwanese 8th grader in the 4th cycle of
Trends in International Mathematics and Science Study (TIMSS) are
analyzed to examine the influence of the science teachers- preference
in experimental teaching on the relationships between the affective
variables ( the perceived usefulness of science, ease of using science
and science learning interest) and the academic achievement in science.
After dealing with the missing data, 3711 students and 145 science
teacher-s data were analyzed through a Hierarchical Linear Modeling
technique. The major objective of this study was to determine the role
of the experimental teaching moderates the relationship between
perceived usefulness and achievement.
Abstract: Bioprocesses are appreciated as difficult to control because their dynamic behavior is highly nonlinear and time varying, in particular, when they are operating in fed batch mode. The research objective of this study was to develop an appropriate control method for a complex bioprocess and to implement it on a laboratory plant. Hence, an intelligent control structure has been designed in order to produce biomass and to maximize the specific growth rate.
Abstract: The paper describes a knowledge based system for
analysis of microscopic wear particles. Wear particles contained in
lubricating oil carry important information concerning machine
condition, in particular the state of wear. Experts (Tribologists) in the
field extract this information to monitor the operation of the machine
and ensure safety, efficiency, quality, productivity, and economy of
operation. This procedure is not always objective and it can also be
expensive. The aim is to classify these particles according to their
morphological attributes of size, shape, edge detail, thickness ratio,
color, and texture, and by using this classification thereby predict
wear failure modes in engines and other machinery. The attribute
knowledge links human expertise to the devised Knowledge Based
Wear Particle Analysis System (KBWPAS). The system provides an
automated and systematic approach to wear particle identification
which is linked directly to wear processes and modes that occur in
machinery. This brings consistency in wear judgment prediction
which leads to standardization and also less dependence on
Tribologists.
Abstract: Due to the growing dynamic and complexity within
the market environment production enterprises in particular are faced
with new logistic challenges. Moreover, it is here in this dynamic
environment that the Logistic Operating Curve Theory also reaches
its limits as a method for describing the correlations between the
logistic objectives. In order to convert this theory into a method for
dynamically monitoring productions this paper will introduce
methods for reliably and quickly identifying structural changes
relevant to logistics.
Abstract: The expectation of network performance from the
early days of ARPANET until now has been changed significantly.
Every day, new advancement in technological infrastructure opens
the doors for better quality of service and accordingly level of
perceived quality of network services have been increased over the
time. Nowadays for many applications, late information has no value
or even may result in financial or catastrophic loss, on the other hand,
demands for some level of guarantee in providing and maintaining
quality of service are ever increasing. Based on this history, having a
QoS aware routing system which is able to provide today's required
level of quality of service in the networks and effectively adapt to the
future needs, seems as a key requirement for future Internet. In this
work we have extended the traditional AntNet routing system to
support QoS with multiple metrics such as bandwidth and delay
which is named Q-Net. This novel scalable QoS routing system aims
to provide different types of services in the network simultaneously.
Each type of service can be provided for a period of time in the
network and network nodes do not need to have any previous
knowledge about it. When a type of quality of service is requested,
Q-Net will allocate required resources for the service and will
guarantee QoS requirement of the service, based on target objectives.
Abstract: Microbial-induced calcite precipitation (MICP) is a
relatively green and sustainable soil improvement technique. It
utilizes biochemical process that exists naturally in soil to improve
engineering properties of soils. The calcite precipitation process is
uplifted by the mean of injecting higher concentration of urease
positive bacteria and reagents into the soil. The main objective of this
paper is to provide an overview of the factors affecting the MICP in
soil. Several factors were identified including nutrients, bacteria type,
geometric compatibility of bacteria, bacteria cell concentration,
fixation and distribution of bacteria in soil, temperature, reagents
concentration, pH, and injection method. These factors were found to
be essential for promoting successful MICP soil treatment.
Furthermore, a preliminary laboratory test was carried out to
investigate the potential application of the technique in improving the
shear strength and impermeability of a residual soil specimen. The
results showed that both shear strength and impermeability of
residual soil improved significantly upon MICP treatment. The
improvement increased with increasing soil density.
Abstract: Adaptive e-learning today gives the student a central
role in his own learning process. It allows learners to try things out,
participate in courses like never before, and get more out of learning
than before. In this paper, an adaptive e-learning model for logic
design, simplification of Boolean functions and related fields is
presented. Such model presents suitable courses for each student in a
dynamic and adaptive manner using existing database and workflow
technologies. The main objective of this research work is to provide
an adaptive e-learning model based learners' personality using
explicit and implicit feedback. To recognize the learner-s, we develop
dimensions to decide each individual learning style in order to
accommodate different abilities of the users and to develop vital
skills. Thus, the proposed model becomes more powerful, user
friendly and easy to use and interpret. Finally, it suggests a learning
strategy and appropriate electronic media that match the learner-s
preference.
Abstract: Statistics Canada stated that the wastewater treatment
facilities in most provinces are aging and passes 63% of their useful
life in 2007 the highest ratio among public infrastructure assets.
Currently, there is no standard condition rating system for wastewater
treatment plants that give a specific rating index that describe the
physical integrity of different infrastructure elements in the treatment
plant and its environmental performance. The main objective of this
study is to develop a condition-rating index for wastewater treatment
plants mainly activated sludge systems. The proposed WWTP CRI, is
based on dividing the treatment plant into its three treatment phases;
primary phase, secondary phase and the tertiary phase. The
condition-rating index will reflect the infrastructures state for each
phase, mainly tanks, pipes, blowers and pumps.
Abstract: In geometrical camera calibration, the objective is to
determine a set of camera parameters that describe the mapping
between 3D references coordinates and 2D image coordinates. In this
paper, a technique of calibration and tracking based on both a least
squares method is presented and a correlation technique developed as
part of an augmented reality system. This approach is fast and it can
be used for a real time system
Abstract: This paper deals with motion planning of multiple
mobile robots. Mobile robots working together to achieve several
objectives have many advantages over single robot system. However,
the planning and coordination between the mobile robots is
extremely difficult. In the present investigation rule-based and rulebased-
neuro-fuzzy techniques are analyzed for multiple mobile
robots navigation in an unknown or partially known environment.
The final aims of the robots are to reach some pre-defined goals.
Based upon a reference motion, direction; distances between the
robots and obstacles; and distances between the robots and targets;
different types of rules are taken heuristically and refined later to find
the steering angle. The control system combines a repelling influence
related to the distance between robots and nearby obstacles and with
an attracting influence between the robots and targets. Then a hybrid
rule-based-neuro-fuzzy technique is analysed to find the steering
angle of the robots. Simulation results show that the proposed rulebased-
neuro-fuzzy technique can improve navigation performance in
complex and unknown environments compared to this simple rulebased
technique.
Abstract: The objective of this study was to investigate the effects of dietary supplementation with raw or heat-treated sunflower oil seed with two levels of 7.5% or 15% on unsaturated fatty acids in milk fat and performances of high-yielding lactating cows. Twenty early lactating Holstein cows were used in a complete randomized design. Treatments included: 1) CON, control (without sunflower oil seed). 2) LS-UT, 7.5% raw sunflower oil seed. 3) LS-HT, 7.5% heat-treated sunflower oil seed. 4) HS-UT, 15% raw sunflower oil seed. 5) HS-HT, 15% heat-treated sunflower oil seed. Experimental period lasted for 4 wk, with first 2 wk used for adaptation to the diets. Supplementation with 7.5% raw sunflower seed (LS-UT) tended to decrease milk yield, with 28.37 kg/d compared with the control (34.75 kg/d). Milk fat percentage was increased with the HS-UT treatment that obtained 3.71% compared with CON that was 3.39% and without significant different. Milk protein percent was decreased high level sunflower oil seed treatments (15%) with 3.18% whereas CON treatment is caused 3.40% protein. The cows fed added low sunflower heat-treated (LS-HT) produced milk with the highest content of total unsaturated fatty acid with 32.59 g/100g of milk fat compared with the HS-UT with 23.59 g/100g of milk fat. Content of C18 unsaturated fatty acids in milk fat increased from 21.68 g/100g of fat in the HS-UT to 22.50, 23.98, 27.39 and 30.30 g/100g of fat from the cow fed HS-HT, CON, LS-UT and LS-HT treatments, respectively. C18:2 isomers of fatty acid in milk were greater by LSHT supplementation with significant effect (P < 0.05). Total of C18 unsaturated fatty acids content was significantly higher in milk of animal fed added low heat-treated sunflower (7.5%) than those fed with high sunflower. In all, results of this study showed that diet cow's supplementation with sunflower oil seed tended to reduce milk production of lactating cows but can improve C18 UFA (Unsaturated Fatty Acid) content in milk fat. 7.5% level of sunflower oil seed that heated seemed to be the optimal source to increase UFA production.
Abstract: The research purpose was to evaluate the effect of
Active Imagination Technique (AIT) for bruxism treatment. This
project was approved by the Ethics Committee on Human Research
(CAAE: 05619512.9.0000.0109). Twenty-one volunteers using
interocclusal splint completed the study. Initially they filled in a
questionnaire about their condition, composed of objective questions
on signs and symptoms. Following they were underwent asingle
session of AIT. After 15 days, the volunteers met again the same
initial questionnaire. The results were compared and showed that the
vast majority had pain symptoms, difficulty opening the mouth, pain
when chewing, reduced, some of the participants abandoned the
interocclusal splint during the evaluate period. It is concluded that the
technique can be used in bruxism treatment. Results seem to be
promising and demonstrates the need of highlighting Active
Imagination Technique since it points a possibility of bruxism cure
and that is unprecedented.
Abstract: Power system stabilizers (PSS) are now routinely used in the industry to damp out power system oscillations. In this paper, real-coded genetic algorithm (RCGA) optimization technique is applied to design robust power system stabilizer for both singlemachine infinite-bus (SMIB) and multi-machine power system. The design problem of the proposed controller is formulated as an optimization problem and RCGA is employed to search for optimal controller parameters. By minimizing the time-domain based objective function, in which the deviation in the oscillatory rotor speed of the generator is involved; stability performance of the system is improved. The non-linear simulation results are presented under wide range of operating conditions; disturbances at different locations as well as for various fault clearing sequences to show the effectiveness and robustness of the proposed controller and their ability to provide efficient damping of low frequency oscillations.
Abstract: The objective of this study was to develop vaginal
suppository containing lactobacillus. Four kinds of vaginal
suppositories containing Lactobacillus paracasei HL32 were
formulated: 1) a conventional suppository with Witepsol H-15 as a
base, 2) a conventional suppository with mixed polyethylene glycols
(PEGs) as a base, 3) a hollow-type suppository with Witepsol H-15
as a base and 4) a hollow-type suppository with mixed PEGs as a
base. The release studies demonstrated that the hollow-type
suppository with mixed PEGs as the base gave the highest release of
L. paracasei HL32 and was microbiological stable after storage at 2-
8°C over the period of 3 months.
Abstract: Optimal supplementary damping controller design for Thyristor Controlled Series Compensator (TCSC) is presented in this paper. For the proposed controller design, a multi-objective fitness function consisting of both damping factors and real part of system electromachanical eigenvalue is used and Real- Coded Genetic Algorithm (RCGA) is employed for the optimal supplementary controller parameters. The performance of the designed supplementary TCSC-based damping controller is tested on a weakly connected power system with different disturbances and loading conditions with parameter variations. Simulation results are presented and compared with a conventional power system stabilizer and also with the TCSC-based supplementary controller when the controller parameters are not optimized to show the effectiveness and robustness of the proposed approach over a wide range of loading conditions and disturbances.
Abstract: With the long-term objective of Critical Heat Flux (CHF) prediction, a Direct Numerical Simulation (DNS) framework for simulation of subcooled and saturated nucleate pool boiling is developed. One case of saturated, and three cases of subcooled boiling at different subcooling levels are simulated. Grid refinement study is also reported. Both boiling and condensation phenomena can be computed simultaneously in the proposed numerical framework. Computed bubble detachment diameters of the saturated nucleate pool boiling cases agree well with the experiment. The flow structures around the growing bubble are presented and the accompanying physics is described. The relation between heat flux evolution from the heated wall and the bubble growth is studied, along with investigations of temperature distribution and flow field evolutions.
Abstract: Hospital staff and managers are under pressure and
concerned for effective use and management of scarce resources. The
hospital admissions require many decisions that have complex and
uncertain consequences for hospital resource utilization and patient
flow. It is challenging to predict risk of admissions and length of stay
of a patient due to their vague nature. There is no method to capture
the vague definition of admission of a patient. Also, current methods
and tools used to predict patients at risk of admission fail to deal with
uncertainty in unplanned admission, LOS, patients- characteristics.
The main objective of this paper is to deal with uncertainty in
health system variables, and handles uncertain relationship among
variables. An introduction of machine learning techniques along with
statistical methods like Regression methods can be a proposed
solution approach to handle uncertainty in health system variables. A
model that adapts fuzzy methods to handle uncertain data and
uncertain relationships can be an efficient solution to capture the
vague definition of admission of a patient.
Abstract: The New Basel Capital Accord (Basel II) influences how financial institutions around the world, and especially European Union institutions, determine the amount of capital to reserve. However, as the recent global crisis has shown, the revision of Basel II is needed to reflect current trends, such as increased volatility and correlation, in the world financial markets. The overall objective of Basel II is to increase the safety and soundness of the international financial system. Basel II builds on three main pillars: Pillar I deals with the minimum capital requirements for credit, market and operational risk, Pillar II focuses on the supervisory review process and finally Pillar III promotes market discipline through enhanced disclosure requirements for banks. The aim of this paper is to provide the historical background, key features and impact of Basel II on financial markets. Moreover, we discuss new proposals for international bank regulation (sometimes referred to as Basel III) which include requirements for higher quality, constituency and transparency of banks' capital and risk management, regulation of OTC markets and introduction of new liquidity standards for internationally active banks.