Abstract: An innovative tri-axes micro-power receiver is
proposed. The tri-axes micro-power receiver consists of two sets 3-D
micro-solenoids and one set planar micro-coils in which iron core is
embedded. The three sets of micro-coils are designed to be orthogonal
to each other. Therefore, no matter which direction the flux is present
along, the magnetic energy can be harvested and transformed into
electric power. Not only dead space of receiving power is mostly
reduced, but also transformation efficiency of electromagnetic energy
to electric power can be efficiently raised. By employing commercial
software, Ansoft Maxwell, the preliminary simulation results verify
that the proposed micro-power receiver can efficiently pick up the
energy transmitted by magnetic power source.
As to the fabrication process, the isotropic etching technique is
employed to micro-machine the inverse-trapezoid fillister so that the
copper wire can be successfully electroplated. The adhesion between
micro-coils and fillister is much enhanced.
Abstract: The case study was conducted to show the effect of milking method in goat called half day milking on the milk production and the growth of kids. Data were collected by interviewing farmers and investigating goat production in the communal goat housing from June 2008 to May 2009. The interview was conducted to collect data about goat management. The observations were conducted on 10 goats, which were selected based on the uniformity of age, number of kid born/goat and the milking method in practice. The samples were divided into two groups; those were full 3 months nursing and half day milked goats (in this group the kids were separated from goat during the previous night milking and then the kids were allowed to suck the goat during the day). The result showed that the communal goat housing had 138 goats and 25% of the farmers milked the goat. The implementation of half day milking increased the milk production significantly (P
Abstract: Visually impaired people find it extremely difficult to
acquire basic and vital information necessary for their living.
Therefore, they are at a very high risk of being socially excluded as a
result of poor access to information. In recent years, several attempts
have been made in improving the communication methods for
visually impaired people which involve tactile sensation such as
finger Braille, manual alphabets and the print on palm method and
several other electronic devices. But, there are some problems which
arise in such methods such as lack of privacy and lack of
compatibility to computer environment. This paper describes a low
cost Braille hand glove for blind people using slot sensors and
vibration motors with the help of which they can read and write emails,
text messages and read e-books. This glove allows the person
to type characters based on different Braille combination using six
slot sensors. The vibration in six different positions of the glove
which matches to the Braille code allows them to read characters.
Abstract: A subcarrier - spectral amplitude coding optical code
division multiple access system using the Khazani-Syed code with
Complementary subtraction detection technique is proposed. The
proposed system has been analyzed by taking into account the effects
of phase-induced intensity noise, shot noise, thermal noise and intermodulation
distortion noise. The performance of the system has been
compared with the spectral amplitude coding optical code division
multiple access system using the Hadamard code and the Modified
Quadratic Congruence code. The analysis shows that the proposed
system can eliminate the multiple access interference using the
Complementary subtraction detection technique, and hence improve
the overall system performance.
Abstract: Introduction: Obesity is a major health risk issue in
the present day of life for one and all globally. Obesity is one of the
major concerns for public health according to recent increasing trends
in obesity-related diseases such as Type 2 diabetes. ( Kazuya,
1994).and hyperlipidemia, (Sakata,1990) .which are more prevalent
in Japanese adults with body mass index (BMI) values Z25 kg/m2.(
Japanese Ministry of Health and Welfare,1997). The purpose of the
study was to assess the effect of twelve weeks of brisk walking on
blood pressure and body mass index, anthropometric measurements
of obese males. Method: Thirty obese (BMI= above 30) males, aged
18 to 22 years, were selected from King Fahd University of
Petroleum & Minerals, Saudi Arabia. The subject-s height (cm) was
measured using a stadiometer and body mass (kg) was measured with
a electronic weighing machine. BMI was subsequently calculated
(kg/m2). The blood pressure was measured with standardized
sphygmomanometer in mm of Hg. All the measurements were taken
twice before and twice after the experimental period. The pre and
post anthropometric measurements of waist and hip circumference
were measured with the steel tape in cm. The subjects underwent
walking schedule two times in a week for 12 weeks. The 45 minute
sessions of brisk walking were undertaken at an average intensity of
65% to 85% of maximum HR (HRmax; calculated as 220-age).
Results & Discussion: Statistical findings revealed significant
changes from pre test to post test in case of both systolic blood
pressure and diastolic blood pressure in the walking group. Results
also showed significant decrease in their body mass index and
anthropometric measurements i.e. (waist & hip circumference).
Conclusion: It was concluded that twelve weeks brisk walking is
beneficial for lowering of blood pressure, body mass index, and
anthropometric circumference of obese males.
Abstract: Any rotation of a 3-dimensional object can be performed by three consecutive rotations over Euler angles. Intrinsic rotations produce the same result as extrinsic rotations in transformation. Euler rotations are the movement obtained by changing one of the Euler angles while leaving the other two constant. These Euler rotations are applied in a simple two-axis gimbals set mounted on an automotives. The values of Euler angles are [π/4, π/4, π/4] radians inside the angles ranges for a given coordinate system and these actual orientations can be directly measured from these gimbals set of moving automotives but it can occur the gimbals lock in application at [π/2.24, 0, 0] radians. In order to avoid gimbals lock, the values of quaternion must be [π/4.8, π/8.2, 0, π/4.8] radians. The four-gimbals set can eliminate gimbals lock.
Abstract: This paper focuses on wormhole attacks detection in wireless sensor networks. The wormhole attack is particularly challenging to deal with since the adversary does not need to compromise any nodes and can use laptops or other wireless devices to send the packets on a low latency channel. This paper introduces an easy and effective method to detect and locate the wormholes: Since beacon nodes are assumed to know their coordinates, the straight line distance between each pair of them can be calculated and then compared with the corresponding hop distance, which in this paper equals hop counts × node-s transmission range R. Dramatic difference may emerge because of an existing wormhole. Our detection mechanism is based on this. The approximate location of the wormhole can also be derived in further steps based on this information. To the best of our knowledge, our method is much easier than other wormhole detecting schemes which also use beacon nodes, and to those have special requirements on each nodes (e.g., GPS receivers or tightly synchronized clocks or directional antennas), ours is more economical. Simulation results show that the algorithm is successful in detecting and locating wormholes when the density of beacon nodes reaches 0.008 per m2.
Abstract: In this paper a new control strategy based on Brain
Emotional Learning (BEL) model has been introduced. A modified
BEL model has been proposed to increase the degree of freedom,
controlling capability, reliability and robustness, which can be
implemented in real engineering systems.
The performance of the proposed BEL controller has been
illustrated by applying it on different nonlinear uncertain systems,
showing very good adaptability and robustness, while maintaining
stability.
Abstract: Mobile learning (m-learning) is a new method in teaching and learning process which combines technology of mobile device with learning materials. It can enhance student's engagement in learning activities and facilitate them to access the learning materials at anytime and anywhere. In Kolej Poly-Tech Mara (KPTM), this method is seen as an important effort in teaching practice and to improve student learning performance. The aim of this paper is to discuss the development of m-learning application called Mobile EEF Learning System (MEEFLS) to be implemented for Electric and Electronic Fundamentals course using Flash, XML (Extensible Markup Language) and J2ME (Java 2 micro edition). System Development Life Cycle (SDLC) was used as an application development approach. It has three modules in this application such as notes or course material, exercises and video. MEELFS development is seen as a tool or a pilot test for m-learning in KPTM.
Abstract: The Non-Rotating Adjustable Stabilizer / Directional
Solution (NAS/DS) is the imitation of a mechanical process or an
object by a directional drilling operation that causes a respond
mathematically and graphically to data and decision to choose the
best conditions compared to the previous mode.
The NAS/DS Auto Guide rotary steerable tool is undergoing final
field trials. The point-the-bit tool can use any bit, work at any
rotating speed, work with any MWD/LWD system, and there is no
pressure drop through the tool. It is a fully closed-loop system that
automatically maintains a specified curvature rate.
The Non–Rotating Adjustable stabilizer (NAS) can be controls
curvature rate by exactly positioning and run with the optimum bit,
use the most effective weight (WOB) and rotary speed (RPM) and
apply all of the available hydraulic energy to the bit. The directional
simulator allowed to specify the size of the curvature rate
performance errors of the NAS tool and the magnitude of the random
errors in the survey measurements called the Directional Solution
(DS).
The combination of these technologies (NAS/DS) will provide
smoother bore holes, reduced drilling time, reduced drilling cost and
incredible targeting precision. This simulator controls curvature rate
by precisely adjusting the radial extension of stabilizer blades on a
near bit Non-Rotating Stabilizer and control process corrects for the
secondary effects caused by formation characteristics, bit and tool
wear, and manufacturing tolerances.
Abstract: Seaweed farming is emerging as a viable alternative
activity in the Indonesian fisheries sector. This paper aims to
investigate people-s perceptions of seaweed farming, to analyze its
social and economic impacts and to identify the problems and
obstacles hindering its continued development. Structured and
semi-structured questionnaires were prepared to obtain qualitative
data, and interviews were conducted with fishermen who also plant
seaweed. The findings showed that fishermen in the Laikang Bay were
enthusiastic about cultivating seaweeds and that seaweed plays a major
role in supporting the household economy of fishermen. However,
current seaweed drying technologies cannot support increased
seaweed production on a farm or plot, especially in the rainy season.
Additionally, variable monsoon seasons and long marketing channels
are still major constraints on the development of the industry. Finally,
capture fisheries, the primary economic livelihood of fishermen of
older generations, is being slowly replaced by seaweed farming.
Abstract: Integration of process planning and scheduling
functions is necessary to achieve superior overall system
performance. This paper proposes a methodology for integration of
process planning and scheduling for prismatic component that can be
implemented in a company with existing departments. The developed
model considers technological constraints whereas available time for
machining in shop floor is the limiting factor to produce multiple
process plan (MPP). It takes advantage of MPP while guarantied the
fulfillment of the due dates via using overtime. This study has been
proposed to determinate machining parameters, tools, machine and
amount of over time within the minimum cost objective while
overtime is considered for this. At last the illustration shows that the
system performance is improved by as measured by cost and
compatible with due date.
Abstract: Happening of Ferroresonance phenomenon is one of the reasons of consuming and ruining transformers, so recognition of Ferroresonance phenomenon has a special importance. A novel method for classification of Ferroresonance presented in this paper. Using this method Ferroresonance can be discriminate from other transients such as capacitor switching, load switching, transformer switching. Wavelet transform is used for decomposition of signals and Competitive Neural Network used for classification. Ferroresonance data and other transients was obtained by simulation using EMTP program. Using Daubechies wavelet transform signals has been decomposed till six levels. The energy of six detailed signals that obtained by wavelet transform are used for training and trailing Competitive Neural Network. Results show that the proposed procedure is efficient in identifying Ferroresonance from other events.
Abstract: We consider the topological entropy of maps that in
general, cannot be described by one-dimensional dynamics. In particular,
we show that for a multivalued map F generated by singlevalued
maps, the topological entropy of any of the single-value map bounds the topological entropy of F from below.
Abstract: Bio-chips are used for experiments on genes and
contain various information such as genes, samples and so on. The
two-dimensional bio-chips, in which one axis represent genes and the
other represent samples, are widely being used these days. Instead of
experimenting with real genes which cost lots of money and much
time to get the results, bio-chips are being used for biological
experiments. And extracting data from the bio-chips with high
accuracy and finding out the patterns or useful information from such
data is very important. Bio-chip analysis systems extract data from
various kinds of bio-chips and mine the data in order to get useful
information. One of the commonly used methods to mine the data is
classification. The algorithm that is used to classify the data can be
various depending on the data types or number characteristics and so
on. Considering that bio-chip data is extremely large, an algorithm that
imitates the ecosystem such as the ant algorithm is suitable to use as an
algorithm for classification. This paper focuses on finding the
classification rules from the bio-chip data using the Ant Colony
algorithm which imitates the ecosystem. The developed system takes
in consideration the accuracy of the discovered rules when it applies it
to the bio-chip data in order to predict the classes.
Abstract: Knowledge Discovery of Databases (KDD) is the
process of extracting previously unknown but useful and significant
information from large massive volume of databases. Data Mining is
a stage in the entire process of KDD which applies an algorithm to
extract interesting patterns. Usually, such algorithms generate huge
volume of patterns. These patterns have to be evaluated by using
interestingness measures to reflect the user requirements.
Interestingness is defined in different ways, (i) Objective measures
(ii) Subjective measures. Objective measures such as support and
confidence extract meaningful patterns based on the structure of the
patterns, while subjective measures such as unexpectedness and
novelty reflect the user perspective. In this report, we try to brief the
more widely spread and successful subjective measures and propose
a new subjective measure of interestingness, i.e. shocking.
Abstract: Ventricular fibrillation is a very important health
problem as is the cause of most of the sudden deaths in the world.
Waves of electrical activity are sent by the SA node, propagate
through the cardiac tissue and activate the mechanisms of cell
contraction, and therefore are responsible to pump blood to the body
harmonically. A spiral wave is an abnormal auto sustainable wave
that is responsible of certain types of arrhythmias. When these waves
break up, give rise to the fibrillation regime, in which there is a
complete loss in the coordination of the contraction of the heart
muscle. Interaction of spiral waves and obstacles is also of great
importance as it is believed that the attachment of a spiral wave to an
obstacle can provide with a transition of two different arrhythmias.
An obstacle can be partially excitable or non excitable. In this talk,
we present a numerical study of the interaction of meandering spiral
waves with partially and non excitable obstacles and focus on the
problem where the obstacle plays a fundamental role in the switch
between different spiral regimes, which represent different
arrhythmic regimes. Particularly, we study the phenomenon of
destabilization of spiral waves due to the presence of obstacles, a
phenomenon not completely understood (This work will appear as a
Chapter in a Book named Cardiac Arrhytmias by INTECH under the
name "Spiral Waves, Obstacles and Cardiac Arrhythmias", ISBN
979-953-307-050-5.).
Abstract: Surface water pollution is one of the serious
environmental problems in rural areas of South Africa due to
discharge of household waste into the streams, turning them into
open sewers. In this study, samples of water were collected from a
stream in Soshanguve and analysed. The result showed that pollution
in the area was caused by man and its activities. The water quality in
the area was found to have deterioted significantly after water runoff
from farms and household wastes. The result shows, fertilizer runoff
contributes 50% of the pollution while pesticides and sediments
contribute up to 10% respectively in the streams, while household
waste contributes up to 30%. This study gives an outline of the
sources of water pollution in the area and provides a process of
creating a clean and unpolluted environment for Soshanguve
community in Pretoria north in order to achieve the 7th aim of the
millennium development goals by 2015, which is ensuring
environmental sustainability.
Abstract: Technology or lack of it will play an important role in Africa-s effort to achieve inclusive development. Although a key determinant of competitiveness, new technology can exacerbate exclusion of the majority from the mainstream economic activities. To minimise potential technology exclusion while leveraging its critical role in African-s development, requires insight into technology diffusion process. Using system dynamics approach, a technology diffusion model is presented. The frequency of interaction of people exposed to and those not exposed to technology, and the technology adoption rate - the fraction of people who embrace new technologies once they are exposed, are identified as the broad factors critical to technology diffusion to wider society enabling more people to be part of the economic growth process. Based on simulation results, it is recommends that these two broad factors should form part of national policy aimed at achieving inclusive and sustainable development in Africa.
Abstract: Self-Excited Induction Generator (SEIG) builds up voltage while it enters in its magnetic saturation region. Due to non-linear magnetic characteristics, the performance analysis of SEIG involves cumbersome mathematical computations. The dependence of air-gap voltage on saturated magnetizing reactance can only be established at rated frequency by conducting a laboratory test commonly known as synchronous run test. But, there is no laboratory method to determine saturated magnetizing reactance and air-gap voltage of SEIG at varying speed, terminal capacitance and other loading conditions. For overall analysis of SEIG, prior information of magnetizing reactance, generated frequency and air-gap voltage is essentially required. Thus, analytical methods are the only alternative to determine these variables. Non-existence of direct mathematical relationship of these variables for different terminal conditions has forced the researchers to evolve new computational techniques. Artificial Neural Networks (ANNs) are very useful for solution of such complex problems, as they do not require any a priori information about the system. In this paper, an attempt is made to use cascaded neural networks to first determine the generated frequency and magnetizing reactance with varying terminal conditions and then air-gap voltage of SEIG. The results obtained from the ANN model are used to evaluate the overall performance of SEIG and are found to be in good agreement with experimental results. Hence, it is concluded that analysis of SEIG can be carried out effectively using ANNs.