Abstract: In this paper we are to find the optimum
multiwavelet for compression of electrocardiogram (ECG)
signals. At present, it is not well known which multiwavelet is
the best choice for optimum compression of ECG. In this
work, we examine different multiwavelets on 24 sets of ECG
data with entirely different characteristics, selected from MITBIH
database. For assessing the functionality of the different
multiwavelets in compressing ECG signals, in addition to
known factors such as Compression Ratio (CR), Percent Root
Difference (PRD), Distortion (D), Root Mean Square Error
(RMSE) in compression literature, we also employed the
Cross Correlation (CC) criterion for studying the
morphological relations between the reconstructed and the
original ECG signal and Signal to reconstruction Noise Ratio
(SNR). The simulation results show that the cardbal2 by the
means of identity (Id) prefiltering method to be the best
effective transformation.
Abstract: Heavy rains are one of the features of arid and semi
arid climates which result in flood. This kind of rainfall originates
from environmental and synoptic conditions. Mediterranean cyclones
are the major factor in heavy rainfall in Iran, but these cyclones do
not happen in some parts of Iran such as Southern and Southeastern
areas. In this study, it has been tried to pinpoint the synoptic reasons
of heavy rainfall in Isfahan through the analysis of the relationship
between this rainfall in Isfahan and atmospheric system over Iran and
the areas around it. The findings of this study show that the major
factor have is the arrival of Sudanese low pressure system in this
region from the southwest, of course if the ascent local conditions
such as heat occur, the heaviest rains happen in Isfahan. In fact this
kind of rainfall in Isfahan has a Sudanese origin and if it is
accompanied by Mediterranean system, heavier rain falls.
Abstract: The objective of this research was to study the career
success and the satisfaction of female executives working for schools
in Bangkok, Thailand. This paper drew upon the survey data
collected from 68 female executives. The survey conducted in on
Bangkok schools. The statistics utilized in this paper included
percentage, mean, standard deviation as well as t-test. The findings
revealed that the majority of samples had more than 30 years of
experience, held a master degree, and had an average income of less
than 40,000 baht. The majority of respondents worked not more than
50 hours per week. In addition, the mean score revealed career
development was ranked as their number one career satisfaction and
having a job related to education was ranked as their number one job
satisfaction. Also, the mean score of all categories of satisfaction was
4.61 with standard deviation of 1.677 which indicated that female
executive level of satisfaction was high. In terms of the subjectivity
career success, the hypothesis testing’s result disclosed that female
executives with different married status had a difference in their job
satisfaction which was significant at the 0.05 confidence level.
Abstract: Cooperative visual modeling is more and more
necessary in our complicated world. A collaborative environment
which supports interactive operation and communication is required
to increase work efficiency. We present a collaborative visual
modeling framework which collaborative platform could be built on.
On this platform, cooperation and communication is available for
designers from different regions. This framework, which is different
from other collaborative frameworks, contains a uniform message
format, a message handling mechanism and other functions such as
message pretreatment and Role-Communication-Token Access
Control (RCTAC). We also show our implementation of this
framework called Orchestra Designer, which support BPLE
workflow modeling cooperatively online.
Abstract: In this paper we present a full performance analysis of an energy conserving routing protocol in mobile ad hoc network, named ER-AODV (Energy Reverse Ad-hoc On-demand Distance Vector routing). ER-AODV is a reactive routing protocol based on a policy which combines two mechanisms used in the basic AODV protocol. AODV and most of the on demand ad hoc routing protocols use single route reply along reverse path. Rapid change of topology causes that the route reply could not arrive to the source node, i.e. after a source node sends several route request messages, the node obtains a reply message, and this increases in power consumption. To avoid these problems, we propose a mechanism which tries multiple route replies. The second mechanism proposes a new adaptive approach which seeks to incorporate the metric "residual energy " in the process route selection, Indeed the residual energy of mobile nodes were considered when making routing decisions. The results of simulation show that protocol ER-AODV answers a better energy conservation.
Abstract: In this paper, a second order autoregressive (AR)
model is proposed to discriminate alcoholics using single trial
gamma band Visual Evoked Potential (VEP) signals using 3 different
classifiers: Simplified Fuzzy ARTMAP (SFA) neural network (NN),
Multilayer-perceptron-backpropagation (MLP-BP) NN and Linear
Discriminant (LD). Electroencephalogram (EEG) signals were
recorded from alcoholic and control subjects during the presentation
of visuals from Snodgrass and Vanderwart picture set. Single trial
VEP signals were extracted from EEG signals using Elliptic filtering
in the gamma band spectral range. A second order AR model was
used as gamma band VEP exhibits pseudo-periodic behaviour and
second order AR is optimal to represent this behaviour. This
circumvents the requirement of having to use some criteria to choose
the correct order. The averaged discrimination errors of 2.6%, 2.8%
and 11.9% were given by LD, MLP-BP and SFA classifiers. The
high LD discrimination results show the validity of the proposed
method to discriminate between alcoholic subjects.
Abstract: Displacement measurement was conducted on compact normal and shear specimens made of acrylic homogeneous material subjected to mixed-mode loading by digital image correlation. The intelligent hybrid method proposed by Nishioka et al. was applied to the stress-strain analysis near the crack tip. The accuracy of stress-intensity factor at the free surface was discussed from the viewpoint of both the experiment and 3-D finite element analysis. The surface images before and after deformation were taken by a CMOS camera, and we developed the system which enabled the real time stress analysis based on digital image correlation and inverse problem analysis. The great portion of processing time of this system was spent on displacement analysis. Then, we tried improvement in speed of this portion. In the case of cracked body, it is also possible to evaluate fracture mechanics parameters such as the J integral, the strain energy release rate, and the stress-intensity factor of mixed-mode. The 9-points elliptic paraboloid approximation could not analyze the displacement of submicron order with high accuracy. The analysis accuracy of displacement was improved considerably by introducing the Newton-Raphson method in consideration of deformation of a subset. The stress-intensity factor was evaluated with high accuracy of less than 1% of the error.
Abstract: This paper presents the influence of distributed generation (DG) on congestion and locational marginal price (LMP) in an optimal power flow (OPF) based wholesale electricity market. The problem of optimal placement to manage congestion and reduce LMP is formulated for the objective of social welfare maximization. From competitive electricity market standpoint, DGs have great value when they reduce load in particular locations and at particular times when feeders are heavily loaded. The paper lies on the groundwork that solution to optimal mix of generation and transmission resources can be achieved by addressing congestion and corresponding LMP. Obtained as lagrangian multiplier associated with active power flow equation for each node, LMP gives the short run marginal cost (SRMC) of electricity. Specific grid locations are examined to study the influence of DG penetration on congestion and corresponding shadow prices. The influence of DG on congestion and locational marginal prices has been demonstrated in a modified IEEE 14 bus test system.
Abstract: In recent years, global warming has become a
worldwide problem. The reduction of carbon dioxide emissions is a
top priority for many companies in the manufacturing industry. In the
automobile industry as well, the reduction of carbon dioxide emissions
is one of the most important issues. Technology to reduce the weight
of automotive parts improves the fuel economy of automobiles, and is
an important technology for reducing carbon dioxide. Also, even if
this weight reduction technology is applied to electric automobiles
rather than gasoline automobiles, reducing energy consumption
remains an important issue. Plastic processing of hollow pipes is one
important technology for realizing the weight reduction of automotive
parts. Ohashi et al. [1],[2] present an example of research on pipe
formation in which a process was carried out to enlarge a pipe
diameter using a lost core, achieving the suppression of wall thickness
reduction and greater pipe expansion than hydroforming.
In this study, we investigated a method to increase the wall
thickness of a pipe through pipe compression using planetary rolls.
The establishment of a technology whereby the wall thickness of a
pipe can be controlled without buckling the pipe is an important
technology for the weight reduction of products. Using the finite
element analysis method, we predicted that it would be possible to
increase the compression of an aluminum pipe with a 3mm wall
thickness by approximately 20%, and wall thickness by approximately
20% by pressing the hollow pipe with planetary rolls.
Abstract: The environmental impacts caused by the current production and consumption models, together with the impact that the current economic crisis, bring necessary changes in the European industry toward new business models based on sustainability issues that could allow them to innovate and improve their competitiveness. This paper analyzes the key environmental issues and the current and future market trends in one of the most important industrial sectors in Spain, the furniture sector. It also proposes new decision support tools -diagnostic kit, roadmap and guidelines- to guide companies to implement sustainability criteria into their organizations, including eco-design strategies and other economical and social strategies in accordance with the sustainability definition, and other available tools such as eco-labels, environmental management systems, etc., and to use and combine them to obtain the results the company expects to help improve its competitiveness.
Abstract: A direct connection between ElectroEncephaloGram
(EEG) and the genetic information of individuals has been
investigated by neurophysiologists and psychiatrists since 1960-s;
and it opens a new research area in the science. This paper focuses on
the person identification based on feature extracted from the EEG
which can show a direct connection between EEG and the genetic
information of subjects. In this work the full EO EEG signal of
healthy individuals are estimated by an autoregressive (AR) model
and the AR parameters are extracted as features. Here for feature
vector constitution, two methods have been proposed; in the first
method the extracted parameters of each channel are used as a
feature vector in the classification step which employs a competitive
neural network and in the second method a combination of different
channel parameters are used as a feature vector. Correct classification
scores at the range of 80% to 100% reveal the potential of our
approach for person classification/identification and are in agreement
to the previous researches showing evidence that the EEG signal
carries genetic information. The novelty of this work is in the
combination of AR parameters and the network type (competitive
network) that we have used. A comparison between the first and the
second approach imply preference of the second one.
Abstract: The electronically available Urdu data is in image form
which is very difficult to process. Printed Urdu data is the root cause
of problem. So for the rapid progress of Urdu language we need an
OCR systems, which can help us to make Urdu data available for the
common person. Research has been carried out for years to automata
Arabic and Urdu script. But the biggest hurdle in the development of
Urdu OCR is the challenge to recognize Nastalique Script which is
taken as standard for writing Urdu language. Nastalique script is
written diagonally with no fixed baseline which makes the script
somewhat complex. Overlap is present not only in characters but in
the ligatures as well. This paper proposes a method which allows
successful recognition of Nastalique Script.
Abstract: The Implementation of the Union law faces major
challenges today. If for a long period of time, the Community and the
Union have persevered in their legislative vocation, now one can
notice that this large legislative quantity has complicated the task of
knowledge and of application the European standards. Under these
circumstances, it became necessary, in order to give effectiveness to
the European legislation, the development of some operational
application criteria and the generation of some new implementation
tools. The correct application of the European Union legislation by
the national public administrations was considered by the European
Commission as being crucial for further integration and proper
functioning of the internal market. Among the initiatives launched in
the past years to promote the exchange of good administrative
practices in the correct application of European Union legislation,
SOLVIT net has proved to be one of the most effective.
Abstract: A suitable e-learning system management needs to
carry out a web-information system in order to allow integrated
fruition of data and metadata concerning the activities typical of elearning
environment. The definition of a “web information system"
for e-learning takes advantage of the potentialities of Web
technologies both as for the access to metadata present on the several
platforms, and as for the implementation of courseware which make
up the relative didactic environment. What information systems have
in common is the technological environment on which they are
generally implemented and the use of metadata in order to structure
information at all cognitive and organization levels. In this work we
are going to define a methodology for the implementation of a
specific web information system for an e-learning environment.
Abstract: Does education matter to the quality of our life? The results of extensive studies offer an affirmative answer to this question: high education levels are positively associated with higher income, with more highly qualified professions, with lower risk of unemployment, with better physical health and also, it is said, with more happiness. However, exploring these relationships is far from straightforward. Aside from educational credentials, what properties distinguish functionally literate individuals? How can their personal level of satisfaction be measured? What are the social mechanisms whereby education affects well-being?Using a literacy index and several measures for well-being developed by secondary analysis of the Adult Literacy and Life Skills Survey database, this investigation examined the relationship between literacy skills and subjective wellbeing in several OECD (Organisation for Economic Co-operation and Development) countries. Special attention was been addressed to Italy, and in particular to two regions representing territorial differences in this country: Piedmont and Campania.
Abstract: The authors of this work indicate by means of a concrete example that it is possible to apply efficaciously the method of multiple criteria programming in dealing with the problem of determining the optimal production plan for a certain period of time. The work presents: (1) the selection of optimization criteria, (2) the setting of the problem of determining an optimal production plan, (3) the setting of the model of multiple criteria programming in finding a solution to a given problem, (4) the revised surrogate trade-off method, (5) generalized multicriteria model for solving production planning problem and problem of choosing technological variants in the metal manufacturing industry. In the final part of this work the authors reflect on the application of the method of multiple criteria programming while determining the optimal production plan in manufacturing enterprises.
Abstract: Global approximation using metamodel for complex
mathematical function or computer model over a large variable
domain is often needed in sensibility analysis, computer simulation,
optimal control, and global design optimization of complex, multiphysics
systems. To overcome the limitations of the existing
response surface (RS), surrogate or metamodel modeling methods for
complex models over large variable domain, a new adaptive and
regressive RS modeling method using quadratic functions and local
area model improvement schemes is introduced. The method applies
an iterative and Latin hypercube sampling based RS update process,
divides the entire domain of design variables into multiple cells,
identifies rougher cells with large modeling error, and further divides
these cells along the roughest dimension direction. A small number
of additional sampling points from the original, expensive model are
added over the small and isolated rough cells to improve the RS
model locally until the model accuracy criteria are satisfied. The
method then combines local RS cells to regenerate the global RS
model with satisfactory accuracy. An effective RS cells sorting
algorithm is also introduced to improve the efficiency of model
evaluation. Benchmark tests are presented and use of the new
metamodeling method to replace complex hybrid electrical vehicle
powertrain performance model in vehicle design optimization and
optimal control are discussed.
Abstract: Toxoplasma gondii is an intracellular parasite capable
of infecting all nucleated cells in a diverse array of species.
Toxoplasma plaque assay have been described using Bacto Agar.
Because of its experimental advantages carboxymethyl cellulose
overlay, medium viscosity was choosing and the aim of this work
was to develop alternative method for formation of T. gondii plaques.
Tachyzoites were inoculated onto monolayers of Vero cells and
cultured at 37° C under 5 % CO2. The cultures were followed up by
microscopy inspection. Small plaques were visible by naphtol blue
stain 4 days after infection. Larger plaques could be observed by day
10 of culture. The carboxymethyl cellulose is a cheap reagent and the
methodology is easier, faster than assays under agar overlay. This is
the first description of the carboxymethyl cellulose overlay use for
obtaining the formation of T. gondii plaques and may be useful in
consequent obtaining tachyzoites for detailed studies.
Abstract: Haptics has been used extensively in many applications especially in human machine interaction and virtual reality systems. Haptic technology allows user to perceive virtual reality as in real world. However, commercially available haptic devices are expensive and may not be suitable for educational purpose. This paper describes the design and development of a low cost haptic knob, with only one degree of freedom, for use in rehabilitation or training hand pronation and supination. End-effectors can be changed to suit different applications or variation in hand sizes and hand orientation.
Abstract: Thyroid dysfunction is one of the most frequently
reported complications of chronic blood transfusion therapy in patients with beta-thalassemia major (BTM). However, the occurrence of thyroid dysfunction and its possible association with
iron overload in BTM patients is still under debate. Therefore, this
study aimed to investigate the status of thyroid functions and iron overload in adolescent and young adult patients with BTM in Jordan population. Thirty six BTM patients aged 12-28 years and matched controls were included in this study. All patients have been receiving frequent blood transfusion to maintain pretransfusion hemoglobin
concentration above 10 g dl-1 and deferoxamine at a dose of 45 mg kg-1 day-1 (8 h, 5-7 days/week) by subcutaneous infusion. Blood
samples were drawn from patients and controls. The status of thyroid functions and iron overload was evaluated by measurements of serum
free thyroxine (FT4), triiodothyronine (FT3), thyrotropin (TSH) and
serum ferritin level. A number of some hematological and
biochemical parameters were also measured. It was found that hematocrit, serum ferritin, hemoglobin, FT3 and zinc, copper mean values were significantly higher in the patients than in the controls (P< 0.05). On other hand, leukocyte, FT4 and TSH mean values were
similar to that of the controls. In addition, our data also indicated that
all of the above examined parameters were not significantly affected
by the patient-s age and gender. Deferoxamine approach for removing excess iron from our BTM patient did not normalize the
values of serum ferritin, copper and zinc, suggesting poor compliance
with deferoxamine chelation therapy. Thus, we recommend the use
of a combination of deferoxamine and deferiprone to reduce the risk
of excess of iron in our patients. Furthermore, thyroid dysfunction
appears to be a rare complication, because our patients showed
normal mean levels for serum TSH and FT4. However, high mean
levels of serum ferritin, zinc, copper might be seen as potential risk
factors for initiation and development of thyroid dysfunctions and
other diseases. Therefore, further studies must be carried out at
yearly intervals with large sample number, to detect subclinical
thyroid dysfunction cases.