Abstract: In the domain of machine vision, the
measurement of length is done using cameras where the
accuracy is directly proportional to the resolution of the
camera and inversely to the size of the object. Since most of
the pixels are wasted imaging the entire body as opposed to
just imaging the edges in a conventional system, a double
aperture system is constructed to focus on the edges to
measure at higher resolution. The paper discusses the
complexities and how they are mitigated to realize a practical
machine vision system.
Abstract: In this study, we are interested in the economic lot
scheduling problem (ELSP) that considers manufacturing of the
serviceable products and remanufacturing of the reworked products. In
this paper, we formulate a mathematical model for the ELSP with
reworks using the basic period approach. In order to solve this
problem, we propose a search algorithm to find the cyclic multiplier ki
of each product that can be cyclically produced for every ki basic
periods. This research also uses two heuristics to search for the optimal
production sequence of all lots and the optimal time length of the basic
period so as to minimize the average total cost. This research uses a
numerical example to show the effectiveness of our approach.
Abstract: Clearance in the joints of multibody mechanical
systems such as linkage mechanisms and robots is a main source of
vibration, and noise of the whole system, and wear of the joints
themselves. This clearance is an inevitable matter and cannot be
eliminated, since it allows the relative motion between joint
components and make them assemblage. This paper presents an
experimental verification of the obtained simulation results of a slider
– crank mechanism of one clearance revolute joint. The simulation
results are obtained with the aid of CAD and dynamic simulation
softwares, which is an effective method of simulation multibody
systems with clearance joints and have many advantages. The
comparison between both simulation and experimental results shows
that the simulation results are so close to the experimental ones which
proves the accuracy and efficiency of this method of modeling and
simulation of mechanical systems with clearance joints.
Abstract: The groundwater is one of the main sources for
sustainability in the United Arab Emirates (UAE). Intensive
developments in Al-Ain area lead to increase water demand, which
consequently reduced the overall groundwater quantity in major
aquifers. However, in certain residential areas within Al-Ain, it has
been noticed that the groundwater level is rising, for example in
Sha-ab Al Askher area. The reasons for the groundwater rising
phenomenon are yet to be investigated. In this work, twenty four
seismic refraction profiles have been carried out along the study
pilot area; as well as field measurement of the groundwater level in
a number of available water wells in the area. The processed
seismic data indicated the deepest and shallowest groundwater
levels are 15m and 2.3 meters respectively. This result is greatly
consistent with the proper field measurement of the groundwater
level. The minimum detected value may be referred to perched
subsurface water which may be associated to the infiltration from
the surrounding water bodies such as lakes, and elevated farms. The
maximum values indicate the accurate groundwater level within the
study area. The findings of this work may be considered as a
preliminary help to the decision makers.
Abstract: Least Development Countries (LDC) like
Bangladesh, whose 25% revenue earning is achieved from Textile
export, requires producing less defective textile for minimizing
production cost and time. Inspection processes done on these
industries are mostly manual and time consuming. To reduce error
on identifying fabric defects requires more automotive and
accurate inspection process. Considering this lacking, this research
implements a Textile Defect Recognizer which uses computer
vision methodology with the combination of multi-layer neural
networks to identify four classifications of textile defects. The
recognizer, suitable for LDC countries, identifies the fabric defects
within economical cost and produces less error prone inspection
system in real time. In order to generate input set for the neural
network, primarily the recognizer captures digital fabric images by
image acquisition device and converts the RGB images into binary
images by restoration process and local threshold techniques.
Later, the output of the processed image, the area of the faulty
portion, the number of objects of the image and the sharp factor of
the image, are feed backed as an input layer to the neural network
which uses back propagation algorithm to compute the weighted
factors and generates the desired classifications of defects as an
output.
Abstract: The vehicle fleet of public transportation companies is often equipped with intelligent on-board passenger information systems. A frequently used but time and labor-intensive way for keeping the on-board controllers up-to-date is the manual update using different memory cards (e.g. flash cards) or portable computers. This paper describes a compression algorithm that enables data transmission using low bandwidth wireless radio networks (e.g. GPRS) by minimizing the amount of data traffic. In typical cases it reaches a compression rate of an order of magnitude better than that of the general purpose compressors. Compressed data can be easily expanded by the low-performance controllers, too.
Abstract: As a security mechanism, authorization is to provide access control to the system resources according to the polices and rules specified by the security strategies. Either by update or in the initial specification, conflicts in authorization is an issue needs to be solved. In this paper, we propose a new approach to solve conflict by using prioritized logic programs and discuss the uniqueness of its answer set. Addressing conflict resolution from logic programming viewpoint and the uniqueness analysis of the answer set provide a novel, efficient approach for authorization conflict resolution.
Abstract: It has been recognized that due to the autonomy and
heterogeneity, of Web services and the Web itself, new approaches
should be developed to describe and advertise Web services. The
most notable approaches rely on the description of Web services
using semantics. This new breed of Web services, termed semantic
Web services, will enable the automatic annotation, advertisement,
discovery, selection, composition, and execution of interorganization
business logic, making the Internet become a common
global platform where organizations and individuals communicate
with each other to carry out various commercial activities and to
provide value-added services. This paper deals with two of the
hottest R&D and technology areas currently associated with the Web
– Web services and the semantic Web. It describes how semantic
Web services extend Web services as the semantic Web improves the
current Web, and presents three different conceptual approaches to
deploying semantic Web services, namely, WSDL-S, OWL-S, and
WSMO.
Abstract: Metal matrix composites have been increasingly used
as materials for components in automotive and aerospace industries
because of their improved properties compared with non-reinforced
alloys. During machining the selection of appropriate machining
parameters to produce job for desired surface roughness is of great
concern considering the economy of manufacturing process. In this
study, a surface roughness prediction model using fuzzy logic is
developed for end milling of Al-SiCp metal matrix composite
component using carbide end mill cutter. The surface roughness is
modeled as a function of spindle speed (N), feed rate (f), depth of cut
(d) and the SiCp percentage (S). The predicted values surface
roughness is compared with experimental result. The model predicts
average percentage error as 4.56% and mean square error as 0.0729.
It is observed that surface roughness is most influenced by feed rate,
spindle speed and SiC percentage. Depth of cut has least influence.
Abstract: One of the most challenges for hard surface cleaning product is to get rid of soap scum, a filmy sticky layer in the bathroom. The deposits of soap scum can be removed by using a proper surfactant solution with chelating agent. Unfortunately, the conventional chelating agent, ethylenediamine tetraacetic acid (EDTA), has low biodegradability, which can be tolerance in water resources and harmful to aquatic animal and microorganism. In this study, two biodegradable chelating agents, ethylenediamine disuccinic acid (EDDS) and glutamic acid diacetic acid (GLDA) were introduced as a replacement of EDTA. The result shows that using GLDA with amphoteric surfactant gave the highest equilibrium solubility of soap scum.
Abstract: This paper presents a new methodology to study power and energy consumption in mechatronic systems early in the development process. This new approach makes use of two modeling languages to represent and simulate embedded control software and electromechanical subsystems in the discrete event and continuous time domain respectively within a single co-model. This co-model enables an accurate representation of power and energy consumption and facilitates the analysis and development of both software and electro-mechanical subsystems in parallel. This makes the engineers aware of energy-wise implications of different design alternatives and enables early trade-off analysis from the beginning of the analysis and design activities.
Abstract: This research aimed at investigating the Cr (III), Cd
(II) and Pb (II) removal efficiencies by using the newly synthesized
metal oxides/ polyethersulfone (PES), Al2O3/PES and ZrO2/PES,
membranes from synthetic wastewater and exploring fouling
mechanisms. A Comparative study between the removal efficiencies
of Cr (III), Cd (II) and Pb (II) from synthetic and natural wastewater
by using adsorption onto agricultural by products and the newly
synthesized Al2O3/PES and ZrO2/PES membranes was conducted to
assess the advantages and limitations of using the metal oxides/PES
membranes for heavy metals removal. The results showed that about
99 % and 88 % removal efficiencies were achieved by the tested
membranes for Pb (II) and Cr (III), respectively.
Abstract: Machining is an important manufacturing process used to produce a wide variety of metallic parts. Among various machining processes, turning is one of the most important one which is employed to shape cylindrical parts. In turning, the quality of finished product is measured in terms of surface roughness. In turn, surface quality is determined by machining parameters and tool geometry specifications. The main objective of this study is to simultaneously model and optimize machining parameters and tool geometry in order to improve the surface roughness for AISI1045 steel. Several levels of machining parameters and tool geometry specifications are considered as input parameters. The surface roughness is selected as process output measure of performance. A Taguchi approach is employed to gather experimental data. Then, based on signal-to-noise (S/N) ratio, the best sets of cutting parameters and tool geometry specifications have been determined. Using these parameters values, the surface roughness of AISI1045 steel parts may be minimized. Experimental results are provided to illustrate the effectiveness of the proposed approach.
Abstract: Studying alternative raw materials for biodiesel production is of major importance. The use of mixtures with incorporation of wastes is an environmental friendly alternative and might reduce biodiesel production costs. The objective of the present work was: (i) to study biodiesel production using waste frying oil mixed with pork lard and (ii) to understand how mixture composition influences biodiesel quality. Biodiesel was produced by transesterification and quality was evaluated through determination of several parameters according to EN 14214. The weight fraction of lard in the mixture varied from 0 to 1 in 0.2 intervals. Biodiesel production yields varied from 81.7 to 88.0 (wt%), the lowest yields being the ones obtained using waste frying oil and lard alone as raw materials. The obtained products fulfilled most of the determined quality specifications according to European biodiesel quality standard EN 14214. Minimum purity (96.5 wt%) was closely obtained when waste frying oil was used alone and when 0.2% of lard was incorporated in the raw material (96.3 wt%); however, it ranged from 93.9 to 96.3 (wt%) being always close to the limit. From the evaluation of the influence of mixture composition in biodiesel quality, it was possible to establish a model to be used for predicting some parameters of biodiesel resulting from mixtures of waste frying oil with lard when different lard contents are used.
Abstract: The development of biomimetic micro-aerial-vehicles
(MAVs) with flapping wings is the future trend in military/domestic
field. The successful flight of MAVs is strongly related to the
understanding of unsteady aerodynamic performance of low Reynolds
number airfoils under dynamic flapping motion. This study explored
the effects of flapping frequency, stroke amplitude, and the inclined
angle of stroke plane on lift force and thrust force of a bio-inspiration
corrugated airfoil with 33 full factorial design of experiment and
ANOVA analysis. Unsteady vorticity flows over a corrugated thin
airfoil executing flapping motion are computed with time-dependent
two-dimensional laminar incompressible Reynolds-averaged
Navier-Stokes equations with the conformal hybrid mesh. The tested
freestream Reynolds number based on the chord length of airfoil as
characteristic length is fixed of 103. The dynamic mesh technique is
applied to model the flapping motion of a corrugated airfoil. Instant
vorticity contours over a complete flapping cycle clearly reveals the
flow mechanisms for lift force generation are dynamic stall, rotational
circulation, and wake capture. The thrust force is produced as the
leading edge vortex shedding from the trailing edge of airfoil to form a
reverse von Karman vortex. Results also indicated that the inclined
angle is the most significant factor on both the lift force and thrust
force. There are strong interactions between tested factors which mean
an optimization study on parameters should be conducted in further
runs.
Abstract: The aim of this study was to demonstrate the possible
effect of some variables such as age, gender, blood sugar level, and
duration of diabetes on the serum level of zinc in diabetic individuals
from Murzuk area. Serum zinc (Zn), Fasting blood sugar (FBS),
hemoglobin HbA1c (HbA1c) were evaluated in 46 type I diabetic
subjects (group 1), 48 type II diabetic subjects (group 2) and 43
healthy individuals (control) of both genders aged (30-81) years. Data
showed that both diabetic groups have significantly higher (P0.05) differences in serum Zn levels were observed
between Males and Females. Serum Zn levels were non-significantly
decreased with increasing age. In type II diabetic subjects, serum Zn
levels were non-significantly decreased with increasing duration of
disease whereas those in type I were non-significantly increased.
Abstract: Home Automation is a field that, among other
subjects, is concerned with the comfort, security and energy
requirements of private homes. The configuration of automatic
functions in this type of houses is not always simple to its inhabitants
requiring the initial setup and regular adjustments. In this work, the
ubiquitous computing system vision is used, where the users- action
patterns are captured, recorded and used to create the contextawareness
that allows the self-configuration of the home automation
system. The system will try to free the users from setup adjustments
as the home tries to adapt to its inhabitants- real habits. In this paper
it is described a completely automated process to determine the light
state and act on them, taking in account the users- daily habits.
Artificial Neural Network (ANN) is used as a pattern recognition
method, classifying for each moment the light state. The work
presented uses data from a real house where a family is actually
living.
Abstract: Aim of this study is to evaluate a new three-equation turbulence model applied to flow and heat transfer through a pipe. Uncertainty is approximated by comparing with published direct numerical simulation results for fully-developed flow. Error in the mean axial velocity, temperature, friction, and heat transfer is found to be negligible.
Abstract: Given a large sparse signal, great wishes are to
reconstruct the signal precisely and accurately from lease number of
measurements as possible as it could. Although this seems possible
by theory, the difficulty is in built an algorithm to perform the
accuracy and efficiency of reconstructing. This paper proposes a new
proved method to reconstruct sparse signal depend on using new
method called Least Support Matching Pursuit (LS-OMP) merge it
with the theory of Partial Knowing Support (PSK) given new method
called Partially Knowing of Least Support Orthogonal Matching
Pursuit (PKLS-OMP).
The new methods depend on the greedy algorithm to compute the
support which depends on the number of iterations. So to make it
faster, the PKLS-OMP adds the idea of partial knowing support of its
algorithm. It shows the efficiency, simplicity, and accuracy to get
back the original signal if the sampling matrix satisfies the Restricted
Isometry Property (RIP).
Simulation results also show that it outperforms many algorithms
especially for compressible signals.
Abstract: We study the possibility of using geometric operators
in the selection of human resources. We develop three new methods
that use the ordered weighted geometric (OWG) operator in different
indexes used for the selection of human resources. The objective of
these models is to manipulate the neutrality of the old methods so the
decision maker is able to select human resources according to his
particular attitude. In order to develop these models, first a short
revision of the OWG operator is developed. Second, we briefly
explain the general process for the selection of human resources.
Then, we develop the three new indexes. They will use the OWG
operator in the Hamming distance, in the adequacy coefficient and in
the index of maximum and minimum level. Finally, an illustrative
example about the new approach is given.