Abstract: In this paper we present a novel design of a wearable
electronic textile. After defining a special application, we used the
specifications of some low power, tiny elements including sensors,
microcontrollers, transceivers, and a fault tolerant special topology to
have the most reliability as well as low power consumption and
longer lifetime. We have considered two different conditions as
normal and bodily critical conditions and set priorities for using
different sensors in various conditions to have a longer effective
lifetime.
Abstract: In this paper, a fractional-order FIR differentiator
design method using the differential evolution (DE) algorithm is
presented. In the proposed method, the FIR digital filter is designed to
meet the frequency response of a desired fractal-order differentiator,
which is evaluated in the frequency domain. To verify the design
performance, another design method considered in the time-domain is
also provided. Simulation results reveal the efficiency of the proposed
method.
Abstract: Due to the call of global warming effects, city planners aim at actions for reducing carbon emission. One of the approaches is to promote the usage of public transportation system toward the transit-oriented-development. For example, rapid transit system in Taipei city and Kaohsiung city are opening. However, until November 2008 the average daily patronage counted only 113,774 passengers at Kaohsiung MRT systems, much less than which was expected. Now the crucial questions: how the public transport competes with private transport? And more importantly, what factors would enhance the use of public transport? To give the answers to those questions, our study first applied regression to analyze the factors attracting people to use public transport around cities in the world. It is shown in our study that the number of MRT stations, city population, cost of living, transit fare, density, gasoline price, and scooter being a major mode of transport are the major factors. Subsequently, our study identified successful and unsuccessful cities in regard of the public transport usage based on the diagnosis of regression residuals. Finally, by comparing transportation strategies adopted by those successful cities, our conclusion stated that Kaohsiung City could apply strategies such as increasing parking fees, reducing parking spaces in downtown area, and reducing transfer time by providing more bus services and public bikes to promote the usage of public transport.
Abstract: In this paper we canvass three case studies of unique
research partnerships between universities and schools in the wider
community. In doing so, we consider those areas of indeterminate
zones of professional practice explored by academics in their
research activities within the wider community. We discuss three
cases: an artist-in-residence program designed to engage primary
school children with new understandings about local Indigenous
Australian issues in their pedagogical and physical landscapes; an
assessment of pedagogical concerns in relation to the use of physical
space in classrooms; and the pedagogical underpinnings of a
costumed museum school program. In doing so, we engage issues of
research as playing an integral part in the development,
implementation and maintenance of academic engagements with
wider community issues.
Abstract: One part of the total employee-s reward is apart from basic wages or salary, employee-s benefits and intangible elements also so called contingent (variable) pay. Contingent pay is connected to performance, contribution, capcompetency or skills of individual employees, and to team-s or company-wide performance or to combination of few of the mentioned possibilities. Main aim of this article is to define, based on available information, contingent pay, describe reasons for its implementation and arguments for and against this type of remuneration, but also bring information not only about its extent and level of utilization by organizations of the Czech Republic operating in the field of environmental protection, but also mention their practical experience with this type of remuneration.
Abstract: In this paper a novel algorithm is proposed to merit
the accuracy of finger vein recognition. The performances of
Principal Component Analysis (PCA), Kernel Principal Component
Analysis (KPCA), and Kernel Entropy Component Analysis (KECA)
in this algorithm are validated and compared with each other in order
to determine which one is the most appropriate one in terms of finger
vein recognition.
Abstract: The design of high-rise building is more often dictated
by its serviceability rather than strength. Structural Engineers are
always striving to overcome challenge of controlling lateral
deflection and storey drifts as well as self weight of structure
imposed on foundation.
One of the most effective techniques is the use of outrigger and
belt truss system in Composite structures that can astutely solve the
above two issues in High-rise constructions.
This paper investigates deflection control by effective utilisation
of belt truss and outrigger system on a 60-storey composite building
subjected to wind loads. A three dimensional Finite Element Analysis
is performed with one, two and three outrigger levels. The reductions
in lateral deflection are 34%, 42% and 51% respectively as compared
to a model without any outrigger system. There is an appreciable
decline in the storey drifts with the introduction of these stiffer
arrangements.
Abstract: In hypersonic environments, the aerothermal effect
makes it difficult for the optical side windows of optical guided
missiles to withstand high heat. This produces cracking or breaking,
resulting in an inability to function. This study used computational
fluid mechanics to investigate the external cooling jet conditions of
optical side windows. The turbulent models k-ε and k-ω were
simulated. To be in better accord with actual aerothermal
environments, a thermal radiation model was added to examine
suitable amounts of external coolants and the optical window
problems of aero-thermodynamics. The simulation results indicate that
when there are no external cooling jets, because airflow on the optical
window and the tail groove produce vortices, the temperatures in these
two locations reach a peak of approximately 1600 K. When the
external cooling jets worked at 0.15 kg/s, the surface temperature of
the optical windows dropped to approximately 280 K. When adding
thermal radiation conditions, because heat flux dissipation was faster,
the surface temperature of the optical windows fell from 280 K to
approximately 260 K. The difference in influence of the different
turbulence models k-ε and k-ω on optical window surface temperature
was not significant.
Abstract: The question of interethnic and interreligious conflicts
in ex-Yugoslavia receives much attention within the framework of
the international context created after 1991 because of the impact of
these conflicts on the security and the stability of the region of
Balkans and of Europe.
This paper focuses on the rationales leading to the declaration of
independence by Kosovo according to ethnic and religious criteria
and analyzes why these same rationales were not applied in Bosnia
and Herzegovina. The approach undertaken aims at comparatively
examining the cases of Kosovo, and Bosnia and Herzegovina. At the
same time, it aims at understanding the political decision making of
the international community in the case of Kosovo. Specifically, was
this a good political decision for the security and the stability of the
region of Balkans, of Europe, or even for global security and
stability?
This research starts with an overview on the European security
framework post 1991, paying particular attention to Kosovo and
Bosnia and Herzegovina. It then presents the theoretical and
methodological framework and compares the representative cases.
Using the constructivism issue and the comparative methodology, it
arrives at the results of the study. An important issue of the paper is
the thesis that this event modifies the principles of international law
and creates dangerous precedents for regional stability in the
Balkans.
Abstract: Recently, the design is becoming important in product development. The technology which is a strong point of Japan is immediately caught up by the foreign countries, and the price competition begins. Therefore companies tend to plan differentiation of products by the design or a color. The purpose of my work was to consider the optimal color for using by product development. We needed to clarify the thing leading to color preference for this purpose. Two kinds of investigations were made. By the first investigation, we found out that a geographical factor difference existed in color preference. Then, investigation which regarded the difference as latitude was conducted. However, the result expected from the difference in latitude was not obtained. It seems that it is necessary to set up difference of latitude a little more greatly, or to reexamine by other geographical factors.
Abstract: Expression and secretion of inflammation markers are
disturbed in obesity. Interleukin-6 reduces body fat mass. The
common G-174C polymorphism in the promoter of IL-6 gene has
been reported that effects on transcriptional regulation. The objective
was to investigate association of the common polymorphism G-174C
with obesity in Iranian population. The present study is cross
sectional association study that included 242 individuals (110 men
and 132 women). Serum IL-6 levels, C-reactive protein, fasting
blood glucose and blood lipids profile were measured .BMI and
WHR were calculated. Genotyping is carried out by PCR and RFLP.
The frequencies of G and C allele were 64.5% and 35.5%,
respectively. The G-174C polymorphism was not associated with
BMI and WHR. However in obese individual, fasting blood glucose
was significantly higher in carrier of C allele compared with the noncarrier.
The IL-6 G-174C polymorphism is not a risk factor for
obesity in Iranian population.
Abstract: Through 1980s, management accounting researchers
described the increasing irrelevance of traditional control and
performance measurement systems. The Balanced Scorecard (BSC)
is a critical business tool for a lot of organizations. It is a
performance measurement system which translates mission and
strategy into objectives. Strategy map approach is a development
variant of BSC in which some necessary causal relations must be
established. To recognize these relations, experts usually use
experience. It is also possible to utilize regression for the same
purpose. Structural Equation Modeling (SEM), which is one of the
most powerful methods of multivariate data analysis, obtains more
appropriate results than traditional methods such as regression. In the
present paper, we propose SEM for the first time to identify the
relations between objectives in the strategy map, and a test to
measure the importance of relations. In SEM, factor analysis and test
of hypotheses are done in the same analysis. SEM is known to be
better than other techniques at supporting analysis and reporting. Our
approach provides a framework which permits the experts to design
the strategy map by applying a comprehensive and scientific method
together with their experience. Therefore this scheme is a more
reliable method in comparison with the previously established
methods.
Abstract: The objective of this work which is based on the
approach of simultaneous engineering is to contribute to the
development of a CIM tool for the synthesis of functional design
dimensions expressed by average values and tolerance intervals. In
this paper, the dispersions method known as the Δl method which
proved reliable in the simulation of manufacturing dimensions is
used to develop a methodology for the automation of the simulation.
This methodology is constructed around three procedures. The first
procedure executes the verification of the functional requirements by
automatically extracting the functional dimension chains in the
mechanical sub-assembly. Then a second procedure performs an
optimization of the dispersions on the basis of unknown variables.
The third procedure uses the optimized values of the dispersions to
compute the optimized average values and tolerances of the
functional dimensions in the chains. A statistical and cost based
approach is integrated in the methodology in order to take account of
the capabilities of the manufacturing processes and to distribute
optimal values among the individual components of the chains.
Abstract: We investigate an asymmetric connections model with a
dynamic network formation process, using an agent based simulation.
We permit heterogeneity of agents- value. Valuable persons seem
to have many links on real social networks. We focus on this
point of view, and examine whether valuable agents change the
structures of the terminal networks. Simulation reveals that valuable
agents diversify the terminal networks. We can not find evidence that
valuable agents increase the possibility that star networks survive the
dynamic process. We find that valuable agents disperse the degrees
of agents in each terminal network on an average.
Abstract: In this paper, the performance of two adaptive
observers applied to interconnected systems is studied. The
nonlinearity of systems can be written in a fractional form. The first
adaptive observer is an adaptive sliding mode observer for a Lipchitz
nonlinear system and the second one is an adaptive sliding mode
observer having a filtered error as a sliding surface. After comparing
their performances throughout the inverted pendulum mounted on a
car system, it was shown that the second one is more robust to
estimate the state.
Abstract: A new blind gray-level watermarking scheme is described. In the proposed method, the host image is first divided into 4*4 non-overlapping blocks. For each block, two first AC coefficients of its Hadamard transform are then estimated using DC coefficients of its neighbor blocks. A gray-level watermark is then added into estimated values. Since embedding watermark does not change the DC coefficients, watermark extracting could be done by estimating AC coefficients and comparing them with their actual values. Several experiments are made and results suggest the robustness of the proposed algorithm.
Abstract: This paper puts forward one kind of air-fuel ratio
control method with PI controller. With the help of
MATLAB/SIMULINK software, the mathematical model of air-fuel
ratio control system for distributorless CNG engine is constructed.
The objective is to maintain cylinder-to-cylinder air-fuel ratio at a
prescribed set point, determined primarily by the state of the Three-
Way-Catalyst (TWC), so that the pollutants in the exhaust are
removed with the highest efficiency. The concurrent control of airfuel
under transient conditions could be implemented by Proportional
and Integral (PI) controller. The simulation result indicates that the
control methods can easily eliminate the air/fuel maldistribution and
maintain the air/fuel ratio at the stochiometry within minimum
engine events.
Abstract: The mobile users with Laptops need to have an
efficient access to i.e. their home personal data or to the Internet from
any place in the world, regardless of their location or point of
attachment, especially while roaming outside the home subnet. An
efficient interpretation of packet losses problem that is encountered
from this roaming is to the centric of all aspects in this work, to be
over-highlighted. The main previous works, such as BER-systems,
Amigos, and ns-2 implementation that are considered to be in
conjunction with that problem under study are reviewed and
discussed. Their drawbacks and limitations, of stopping only at
monitoring, and not to provide an actual solution for eliminating or
even restricting these losses, are mentioned. Besides that, the
framework around which we built a Triple-R sequence as a costeffective
solution to eliminate the packet losses and bridge the gap
between subnets, an area that until now has been largely neglected, is
presented. The results show that, in addition to the high bit error rate
of wireless mobile networks, mainly the low efficiency of mobile-IP
registration procedure is a direct cause of these packet losses.
Furthermore, the output of packet losses interpretation resulted an
illustrated triangle of the registration process. This triangle should be
further researched and analyzed in our future work.
Abstract: This paper presents an adaptive feedback linearization approach to derive helicopter. Ideal feedback linearization is defined for the cases when the system model is known. Adaptive feedback linearization is employed to get asymptotically exact cancellation for the inherent uncertainty in the knowledge of the given parameters of system. The control algorithm is implemented using the feedback linearization technique and adaptive method. The controller parameters are unknown where an adaptive control law aims to drive them towards their ideal values for providing perfect model matching between the reference model and the closed-loop plant model. The converged parameters of controller would then provide good estimates for the unknown plant parameters.
Abstract: In this study, a system of encryption based on chaotic
sequences is described. The system is used for encrypting digital
image data for the purpose of secure image transmission. An image
secure communication scheme based on Logistic map chaotic
sequences with a nonlinear function is proposed in this paper.
Encryption and decryption keys are obtained by one-dimensional
Logistic map that generates secret key for the input of the nonlinear
function. Receiver can recover the information using the received
signal and identical key sequences through the inverse system
technique. The results of computer simulations indicate that the
transmitted source image can be correctly and reliably recovered by
using proposed scheme even under the noisy channel. The
performance of the system will be discussed through evaluating the
quality of recovered image with and without channel noise.