Abstract: High-velocity oxygen fuel (HVOF) thermal spraying
uses a combustion process to heat the gas flow and coating material.
A computational fluid dynamics (CFD) model has been developed to
predict gas dynamic behavior in a HVOF thermal spray gun in which
premixed oxygen and propane are burnt in a combustion chamber
linked to a parallel-sided nozzle. The CFD analysis is applied to
investigate axisymmetric, steady-state, turbulent, compressible,
chemically reacting, subsonic and supersonic flow inside and outside
the gun. The gas velocity, temperature, pressure and Mach number
distributions are presented for various locations inside and outside
the gun. The calculated results show that the most sensitive
parameters affecting the process are fuel-to-oxygen gas ratio and
total gas flow rate. Gas dynamic behavior along the centerline of the
gun depends on both total gas flow rate and fuel-to-oxygen gas ratio.
The numerical simulations show that the axial gas velocity and Mach
number distribution depend on both flow rate and ratio; the highest
velocity is achieved at the higher flow rate and most fuel-rich ratio.
In addition, the results reported in this paper illustrate that the
numerical simulation can be one of the most powerful and beneficial
tools for the HVOF system design, optimization and performance
analysis.
Abstract: During the past several years, face recognition in video
has received significant attention. Not only the wide range of
commercial and law enforcement applications, but also the availability
of feasible technologies after several decades of research contributes
to the trend. Although current face recognition systems have reached a
certain level of maturity, their development is still limited by the
conditions brought about by many real applications. For example,
recognition images of video sequence acquired in an open
environment with changes in illumination and/or pose and/or facial
occlusion and/or low resolution of acquired image remains a largely
unsolved problem. In other words, current algorithms are yet to be
developed. This paper provides an up-to-date survey of video-based
face recognition research. To present a comprehensive survey, we
categorize existing video based recognition approaches and present
detailed descriptions of representative methods within each category.
In addition, relevant topics such as real time detection, real time
tracking for video, issues such as illumination, pose, 3D and low
resolution are covered.
Abstract: Students with high level skills are in demand, especially in scare skill environments. If universities wish to be successful and competitive, its students need to be adequately equipped with the necessary tools. Work Integrated Learning (WIL) is an essential component of the education of a student. The relevance of higher education should be assessed in terms of how it meets the needs of society and the world of work in a global economy. This paper demonstrates how to use Habermas's theory of communicative action to reflect on students- perceptions on their integration in the work environment to achieve social integration and financial justification. Interpretive questionnaires are used to determine the students- view of how they are integrated into society, and contributing to the economy. This paper explores the use of Habermas-s theory of communicative action to give theoretical and methodological guidance for the practice of social findings obtained in this inquiry.
Abstract: The research on two-wheels balancing robot has
gained momentum due to their functionality and reliability when
completing certain tasks. This paper presents investigations into the
performance comparison of Linear Quadratic Regulator (LQR) and
PID-PID controllers for a highly nonlinear 2–wheels balancing robot.
The mathematical model of 2-wheels balancing robot that is highly
nonlinear is derived. The final model is then represented in statespace
form and the system suffers from mismatched condition. Two
system responses namely the robot position and robot angular
position are obtained. The performances of the LQR and PID-PID
controllers are examined in terms of input tracking and disturbances
rejection capability. Simulation results of the responses of the
nonlinear 2–wheels balancing robot are presented in time domain. A
comparative assessment of both control schemes to the system
performance is presented and discussed.
Abstract: Sign language recognition has been a topic of research since the first data glove was developed. Many researchers have attempted to recognize sign language through various techniques. However none of them have ventured into the area of Pakistan Sign Language (PSL). The Boltay Haath project aims at recognizing PSL gestures using Statistical Template Matching. The primary input device is the DataGlove5 developed by 5DT. Alternative approaches use camera-based recognition which, being sensitive to environmental changes are not always a good choice.This paper explains the use of Statistical Template Matching for gesture recognition in Boltay Haath. The system recognizes one handed alphabet signs from PSL.
Abstract: Pomegranate and pomegranate juices (PJs) have taken
great attention for their health benefits in the last years. As there is an
increasing concern about potential health benefits of ellagic acid, it is
of great interest to evaluate alterations in ellagic acid concentration of
commercial PJs. The purpose of this study is to analyze total
phenolic, free and total ellagic acid content of six commercial PJs
sold in Turkish markets using HPLC.
The results showed that some commercial PJs had markedly high
total phenolic and ellagic acid content. Total phenolic substances of
commercial PJs range from 796.71 to 4608.91 mg GAE/l. Free
amount of ellagic acid in commercial PJs range from 27.64 to 111.78
mg/l. Samples are hydrolyzed with concentrated HCl at 93oC for 2
and 24 hour and influences of temperature and time parameters on
hydrolization were investigated. Thermal processing for
pasteurization increased ellagic acid via ellagitannins hydrolysis.
Abstract: Excessive ductility demand on shorter piers is a
common problem for irregular bridges subjected to strong ground
motion. Various techniques have been developed to reduce the
likelihood of collapse of bridge due to failure of shorter piers. This
paper presents the new approach to improve the seismic behavior of
such bridges using Nitinol shape memory alloys (SMAs).
Superelastic SMAs have the ability to remain elastic under very large
deformation due to martensitic transformation. This unique property
leads to enhanced performance of controlled bridge compared with
the performance of the reference bridge. To evaluate the effectiveness
of the devices, nonlinear time history analysis is performed on a RC
single column bent highway bridge using a suite of representative
ground motions. The results show that this method is very effective in
limiting the ductility demand of shorter pier.
Abstract: The basic objective of this paper is to measure and
compare the profitability of investments made by the small and
marginal farmers of the state of West Bengal in floriculture shifting
from the traditional cultivation of paddy. A comparison of IRR is
made to establish the fact that cultivation of flowers yield higher
returns farmers whose land size is so small that viability of paddy
cultivation is raising a question mark. A detailed study of the price
behavior of the flower crop has been carried out in which the factors
leading to the volatility of the price and the dispersion of the range
have also been discussed. Finally the incremental incomes of the
farmers have been calculated with the help of imputed income from
paddy cultivation and the reported income from the selected flowers.
The study shows that the farmers stand gainers if they opt for flower
cultivation.
Abstract: In the context of spectrum surveillance, a method to
recover the code of spread spectrum signal is presented, whereas the
receiver has no knowledge of the transmitter-s spreading sequence.
The approach is based on a genetic algorithm (GA), which is forced to
model the received signal. Genetic algorithms (GAs) are well known
for their robustness in solving complex optimization problems.
Experimental results show that the method provides a good
estimation, even when the signal power is below the noise power.
Abstract: A welded structure must be inspected to guarantee that the weld quality meets the design requirements to assure safety and reliability. However, X-ray image analyses and defect recognition with the computer vision techniques are very complex. Most difficulties lie in finding the small, irregular defects in poor contrast images which requires pre processing to image, extract, and classify features from strong background noise. This paper addresses the issue of designing methodology to extract defect from noisy background radiograph with image processing. Based on the use of actives contours this methodology seems to give good results
Abstract: In this work, we study the problem of determining
the minimum scheduling length that can satisfy end-to-end (ETE)
traffic demand in scheduling-based multihop WSNs with cooperative
multiple-input multiple-output (MIMO) transmission scheme. Specifically,
we present a cross-layer formulation for the joint routing,
scheduling and stream control problem by incorporating various
power and rate adaptation schemes, and taking into account an
antenna beam pattern model and the signal-to-interference-and-noise
(SINR) constraint at the receiver. In the context, we also propose
column generation (CG) solutions to get rid of the complexity
requiring the enumeration of all possible sets of scheduling links.
Abstract: Functional near infrared spectroscopy (fNIRS) is a
practical non-invasive optical technique to detect characteristic of
hemoglobin density dynamics response during functional activation of
the cerebral cortex. In this paper, fNIRS measurements were made in
the area of motor cortex from C4 position according to international
10-20 system. Three subjects, aged 23 - 30 years, were participated in
the experiment.
The aim of this paper was to evaluate the effects of different motor
activation tasks of the hemoglobin density dynamics of fNIRS signal.
The chaotic concept based on deterministic dynamics is an important
feature in biological signal analysis. This paper employs the chaotic
properties which is a novel method of nonlinear analysis, to analyze
and to quantify the chaotic property in the time series of the
hemoglobin dynamics of the various motor imagery tasks of fNIRS
signal. Usually, hemoglobin density in the human brain cortex is
found to change slowly in time. An inevitable noise caused by various
factors is to be included in a signal. So, principle component analysis
method (PCA) is utilized to remove high frequency component. The
phase pace is reconstructed and evaluated the Lyapunov spectrum, and
Lyapunov dimensions. From the experimental results, it can be
conclude that the signals measured by fNIRS are chaotic.
Abstract: In order to enhance the contrast in the regions where the pixels have similar intensities, this paper presents a new histogram equalization scheme. Conventional global equalization schemes over-equalizes these regions so that too bright or dark pixels are resulted and local equalization schemes produce unexpected discontinuities at the boundaries of the blocks. The proposed algorithm segments the original histogram into sub-histograms with reference to brightness level and equalizes each sub-histogram with the limited extents of equalization considering its mean and variance. The final image is determined as the weighted sum of the equalized images obtained by using the sub-histogram equalizations. By limiting the maximum and minimum ranges of equalization operations on individual sub-histograms, the over-equalization effect is eliminated. Also the result image does not miss feature information in low density histogram region since the remaining these area is applied separating equalization. This paper includes how to determine the segmentation points in the histogram. The proposed algorithm has been tested with more than 100 images having various contrasts in the images and the results are compared to the conventional approaches to show its superiority.
Abstract: In this note first we define the notions of intuitionistic
fuzzy dual positive implicative hyper K-ideals of types
1,2,3,4 and intuitionistic fuzzy dual hyper K-ideals. Then we
give some classifications about these notions according to the
level subsets. Also by given some examples we show that these
notions are not equivalent, however we prove some theorems
which show that there are some relationships between these
notions. Finally we define the notions of product and antiproduct
of two fuzzy subsets and then give some theorems
about the relationships between the intuitionistic fuzzy dual
positive implicative hyper K-ideal of types 1,2,3,4 and their
(anti-)products, in particular we give a main decomposition
theorem.
Abstract: In the current context of globalization, accountability has become a key subject of real interest for both, national and international business areas, due to the need for comparability and transparency of the economic situation, so we can speak about the harmonization and convergence of international accounting. The paper presents a qualitative research through content analysis of several reports concerning the roadmap for convergence. First, we develop a conceptual framework for the evolution of standards’ convergence and further we discuss the degree of standards harmonization and convergence between US GAAP and IAS/IFRS as to October 2012. We find that most topics did not follow the expected progress. Furthermore there are still some differences in the long-term project that are in process to be completed and other that were reassessed as a lower priority project.
Abstract: This research aims to study consumer acceptance of Tempeh from various raw materials (type of bean) and determine protein contents for comparison. Tempeh made from soybean, peanut, white kidney bean and sesame in the ratio: - soybean:sesame =1:0.1, soybean:white kidney:sesame =1:1:0.1, soybean:peanut:sesame =1:1:0.1 and peanut:white kidney bean: sesame =1:1:0.1. The study found that consumer is most satisfied with appearances on soybean mixed with white kidney and black sesame tempeh (3.98). The most satisfied tempeh with textures is soybean mixed with peanut and black sesame tempeh (4.00). The most satisfied tempeh with odor is peanut mixed with white kidney bean and black sesame tempeh (4.04). And the most satisfied tempeh with flavor is peanut mixed with white kidney bean and black sesame tempeh (4.2). The amount of protein in production, soybean tempeh has the highest protein. When we add sesame seeds, it made the protein content slightly decreased (1.86 and 0.6 %). When we use peanut as raw material, the protein content decreased 15.3%. And when we use
white kidney bean as raw material, the protein content decreased (22.77- 26.11%).
Abstract: Automatic reusability appraisal is helpful in
evaluating the quality of developed or developing reusable software
components and in identification of reusable components from
existing legacy systems; that can save cost of developing the
software from scratch. But the issue of how to identify reusable
components from existing systems has remained relatively
unexplored. In this research work, structural attributes of software
components are explored using software metrics and quality of the
software is inferred by different Neural Network based approaches,
taking the metric values as input. The calculated reusability value
enables to identify a good quality code automatically. It is found that
the reusability value determined is close to the manual analysis used
to be performed by the programmers or repository managers. So, the
developed system can be used to enhance the productivity and
quality of software development.
Abstract: .Hardware realization of a Neural Network (NN), to a large extent depends on the efficient implementation of a single neuron. FPGA-based reconfigurable computing architectures are suitable for hardware implementation of neural networks. FPGA realization of ANNs with a large number of neurons is still a challenging task. This paper discusses the issues involved in implementation of a multi-input neuron with linear/nonlinear excitation functions using FPGA. Implementation method with resource/speed tradeoff is proposed to handle signed decimal numbers. The VHDL coding developed is tested using Xilinx XC V50hq240 Chip. To improve the speed of operation a lookup table method is used. The problems involved in using a lookup table (LUT) for a nonlinear function is discussed. The percentage saving in resource and the improvement in speed with an LUT for a neuron is reported. An attempt is also made to derive a generalized formula for a multi-input neuron that facilitates to estimate approximately the total resource requirement and speed achievable for a given multilayer neural network. This facilitates the designer to choose the FPGA capacity for a given application. Using the proposed method of implementation a neural network based application, namely, a Space vector modulator for a vector-controlled drive is presented
Abstract: Wireless mesh networks based on IEEE 802.11
technology are a scalable and efficient solution for next generation
wireless networking to provide wide-area wideband internet access to
a significant number of users. The deployment of these wireless mesh
networks may be within different authorities and without any
planning, they are potentially overlapped partially or completely in
the same service area. The aim of the proposed model is design a new
model to Enhancement Throughput of Unplanned Wireless Mesh
Networks Deployment Using Partitioning Hierarchical Cluster
(PHC), the unplanned deployment of WMNs are determinates there
performance. We use throughput optimization approach to model the
unplanned WMNs deployment problem based on partitioning
hierarchical cluster (PHC) based architecture, in this paper the
researcher used bridge node by allowing interworking traffic between
these WMNs as solution for performance degradation.
Abstract: Materials used on exterior spacecraft surfaces are subjected to many environmental threats which can cause degradation, atomic oxygen is one of the most threats. We prepared organic silicon atomic-oxygen-protection film using method of polymerization. This paper presented the effects on the film structure and its durability of the preparation processing, and analyzed the polymerization theory, the film structure and composition of the film. At last, we tested the film in our ground based atomic oxygen simulator, and indicated that the film worked well.