Abstract: A novel biomass composite inspired from wood porous
structure was manufactured by impregnating vinyl monomer into
wood cellular structure under vacuum conditions, and initiating the
monomer for in situ polymerization through a thermal treatment. The
vacuum condition was studied, and the mechanical properties of the
composite were also tested. SEM observation shows that polymer
generated in the wood porous structure, and strongly interacted with
wood matrix; and the polymer content increased with vacuum value
increasing. FTIR indicates that polymer grafted onto wood matrix,
resulting chemical complex between them. The rate of monomer
loading increased with increasing vacuum value and time, accordance
with rate of polymer loading. The compression strength and modulus
of elasticity linearly increased with the increasing rate of polymer
loading. Results indicate that the novel biomass composite possesses
good mechanical properties capable of applying in the fields of
construction, traffic and so forth.
Abstract: Diesel Engines emit complex mixtures of inorganic
and organic compounds in the form of both solid and vapour phase
particles. Most of the particulates released are ultrafine nanoparticles
which are detrimental to human health and can easily enter the body
by respiration. The emissions standards on particulate matter release
from diesel engines are constantly upgraded within the European
Union and with future regulations based on the particles numbers
released instead of merely mass, the need for effective aftertreatment
devices will increase. Standard particulate filters in the form of wall
flow filters can have problems with high soot accumulation,
producing a large exhaust backpressure. A potential solution would
be to combine the standard filter with a flow through filter to reduce
the load on the wall flow filter. In this paper soot particle trapping has
been simulated in different continuous flow filters of monolithic
structure including the use of promoters, at laminar flow conditions.
An Euler Lagrange model, the discrete phase model in Ansys used
with user defined functions for forces acting on particles. A method
to quickly screen trapping of 5 nm and 10 nm particles in different
catalysts designs with tracers was also developed.
Simulations of square duct monoliths with promoters show that the
strength of the vortices produced are not enough to give a high
amount of particle deposition on the catalyst walls. The smallest
particles in the simulations, 5 and 10 nm particles were trapped to a
higher extent, than larger particles up to 1000 nm, in all studied
geometries with the predominant deposition mechanism being
Brownian diffusion. The comparison of the different filters designed
with a wall flow filter does show that the options for altering a design
of a flow through filter, without imposing a too large pressure drop
penalty are good.
Abstract: Recent fifteen years witnessed fast improvements in the field of humanoid robotics. The human-like robot structure is
more suitable to human environment with its supreme obstacle avoidance properties when compared with wheeled service robots.
However, the walking control for bipedal robots is a challenging task
due to their complex dynamics. Stable reference generation plays a very important role in control.
Linear Inverted Pendulum Model (LIPM) and the Zero Moment Point (ZMP) criterion are applied in a number of studies for stable
walking reference generation of biped walking robots. This paper follows this main approach too. We propose a natural and continuous ZMP reference trajectory for a stable and human-like walk. The ZMP reference trajectories move forward under the sole of the support foot when the robot body is supported by a single leg. Robot center of mass trajectory is obtained
from predefined ZMP reference trajectories by a Fourier series
approximation method. The Gibbs phenomenon problem common with Fourier approximations of discontinuous functions is avoided by employing continuous ZMP references. Also, these ZMP reference
trajectories possess pre-assigned single and double support phases,
which are very useful in experimental tuning work.
The ZMP based reference generation strategy is tested via threedimensional
full-dynamics simulations of a 12-degrees-of-freedom
biped robot model. Simulation results indicate that the proposed reference trajectory generation technique is successful.
Abstract: Using ab initio theoretical calculations, we present
analysis of fragmentation process. The analysis is performed in two
steps. The first step is calculation of fragmentation energies by ab
initio calculations. The second step is application of the energies to
kinetic description of process. The energies of fragments are
presented in this paper. The kinetics of fragmentation process can be
described by numerical models. The method for kinetic analysis is
described in this paper. The result - composition of fragmentation
products - will be calculated in future. The results from model can be
compared to the concentrations of fragments from mass spectrum.
Abstract: An experiment was performed in the south of
Morocco in order to evaluate the effect of deficit irrigation by treated
wastewater on chickpea production. We applied six irrigation
treatments on a local variety of chickpea by supplying alternatively
50 or 100% of ETm in a completely randomized design.
We found a highly significant difference between treatments in
terms of biomass production. Drought stress during the vegetative
period showed highest yield with 6.5 t/ha which was more than the
yield obtained for the control (4.9 t/ha). The optimal crop stage in
which deficit irrigation can be applied is the vegetative growth stage,
as the crop has a chance to develop its root system, to be able to
cover the plant needs for water and nutrient supply during the rest of
cycle, and non stress conditions during the flowering and seed filling
stages allow the plant to optimize its photosynthesis and carbon
translocation, therefore increase its productivity.
Abstract: In this paper the authors present the framework of a
system for assisting users through counseling on personal health, the
Personal Health Assistance Service Expert System (PHASES).
Personal health assistance systems need Personal Health Records
(PHR), which support wellness activities, improve the understanding
of personal health issues, enable access to data from providers of
health services, strengthen health promotion, and in the end improve
the health of the population. This is especially important in societies
where the health costs increase at a higher rate than the overall
economy. The most important elements of a healthy lifestyle are
related to food (such as balanced nutrition and diets), activities for
body fitness (such as walking, sports, fitness programs), and other
medical treatments (such as massage, prescriptions of drugs). The
PHASES framework uses an ontology of food, which includes
nutritional facts, an expert system keeping track of personal health
data that are matched with medical treatments, and a comprehensive
data transfer between patients and the system.
Abstract: This paper presents a cold flow simulation study of a small gas turbine combustor performed using laboratory scale test rig. The main objective of this investigation is to obtain physical insight of the main vortex, responsible for the efficient mixing of fuel and air. Such models are necessary for predictions and optimization of real gas turbine combustors. Air swirler can control the combustor performance by assisting in the fuel-air mixing process and by producing recirculation region which can act as flame holders and influences residence time. Thus, proper selection of a swirler is needed to enhance combustor performance and to reduce NOx emissions. Three different axial air swirlers were used based on their vane angles i.e., 30°, 45°, and 60°. Three-dimensional, viscous, turbulent, isothermal flow characteristics of the combustor model operating at room temperature were simulated via Reynolds- Averaged Navier-Stokes (RANS) code. The model geometry has been created using solid model, and the meshing has been done using GAMBIT preprocessing package. Finally, the solution and analysis were carried out in a FLUENT solver. This serves to demonstrate the capability of the code for design and analysis of real combustor. The effects of swirlers and mass flow rate were examined. Details of the complex flow structure such as vortices and recirculation zones were obtained by the simulation model. The computational model predicts a major recirculation zone in the central region immediately downstream of the fuel nozzle and a second recirculation zone in the upstream corner of the combustion chamber. It is also shown that swirler angles changes have significant effects on the combustor flowfield as well as pressure losses.
Abstract: A homologous series of aromatic esters, 4-nalkanoyloxybenzylidene-
4--bromoanilines, nABBA,
consisting of two 1,4-disubstituted phenyl cores and a Schiff
base central linkage was synthesized. All the members can be
differed by the number of carbon atoms at terminal
alkanoyloxy chain (CnH2n-1COO-, n = 2, 6, 18). The molecular
structure of nABBA was confirmed with infrared
spectroscopy, nuclear magnetic resonance (NMR)
spectroscopy and electron-ionization mass (EI-MS)
spectrometry. Mesomorphic properties were studied using
differential scanning calorimetry and polarizing optical
microscopy.
Abstract: The ability of agricultural and decorative plants to
absorb and detoxify TNT and RDX has been studied. All tested 8
plants, grown hydroponically, were able to absorb these explosives
from water solutions: Alfalfa > Soybean > Chickpea> Chikling vetch
>Ryegrass > Mung bean> China bean > Maize. Differently from
TNT, RDX did not exhibit negative influence on seed germination
and plant growth. Moreover, some plants, exposed to RDX
containing solution were increased in their biomass by 20%. Study of
the fate of absorbed [1-14ðí]-TNT revealed the label distribution in
low and high-molecular mass compounds, both in roots and above
ground parts of plants, prevailing in the later. Content of 14ðí in lowmolecular
compounds in plant roots are much higher than in above
ground parts. On the contrary, high-molecular compounds are more
intensively labeled in aboveground parts of soybean. Most part (up to
70%) of metabolites of TNT, formed either by enzymatic reduction
or oxidation, is found in high molecular insoluble conjugates.
Activation of enzymes, responsible for reduction, oxidation and
conjugation of TNT, such as nitroreductase, peroxidase,
phenoloxidase and glutathione S-transferase has been demonstrated.
Among these enzymes, only nitroreductase was shown to be induced
in alfalfa, exposed to RDX. The increase in malate dehydrogenase
activities in plants, exposed to both explosives, indicates
intensification of Tricarboxylic Acid Cycle, that generates reduced
equivalents of NAD(P)H, necessary for functioning of the
nitroreductase. The hypothetic scheme of TNT metabolism in plants
is proposed.
Abstract: Bioprocesses are appreciated as difficult to control because their dynamic behavior is highly nonlinear and time varying, in particular, when they are operating in fed batch mode. The research objective of this study was to develop an appropriate control method for a complex bioprocess and to implement it on a laboratory plant. Hence, an intelligent control structure has been designed in order to produce biomass and to maximize the specific growth rate.
Abstract: In this study, an analysis has been performed for
conjugate heat and mass transfer of a steady laminar boundary-layer
mixed convection of magnetic hydrodynamic (MHD) flow with
radiation effect of second grade subject to suction past a stretching
sheet. Parameters E Nr, Gr, Gc, Ec and Sc represent the dominance of
the viscoelastic fluid heat and mass transfer effect which have
presented in governing equations, respectively. The similar
transformation and the finite-difference method have been used to
analyze the present problem. The conjugate heat and mass transfer
results show that the non-Newtonian viscoelastic fluid has a better heat
transfer effect than the Newtonian fluid. The free convection with a
larger r G or c G has a good heat transfer effect better than a smaller
r G or c G , and the radiative convection has a good heat transfer
effect better than non-radiative convection.
Abstract: Treatment of tar-containing wastewater is necessary
for the successful operation of biomass gasification plants (BGPs). In
the present study, tar-containing wastewater was treated using lime
and alum for the removal of in-organics, followed by adsorption on
powdered activated carbon (PAC) for the removal of organics. Limealum
experiments were performed in a jar apparatus and activated
carbon studies were performed in an orbital shaker. At optimum
concentrations, both lime and alum individually proved to be capable
of removing color, total suspended solids (TSS) and total dissolved
solids (TDS), but in both cases, pH adjustment had to be carried out
after treatment. The combination of lime and alum at the dose ratio
of 0.8:0.8 g/L was found to be optimum for the removal of inorganics.
The removal efficiency achieved at optimum
concentrations were 78.6, 62.0, 62.5 and 52.8% for color, alkalinity,
TSS and TDS, respectively. The major advantages of the lime-alum
combination were observed to be as follows: no requirement of pH
adjustment before and after treatment and good settleability of
sludge. Coagulation-precipitation followed by adsorption on PAC
resulted in 92.3% chemical oxygen demand (COD) removal and
100% phenol removal at equilibrium. Ammonia removal efficiency
was found to be 11.7% during coagulation-flocculation and 36.2%
during adsorption on PAC. Adsorption of organics on PAC in terms
of COD and phenol followed Freundlich isotherm with Kf = 0.55 &
18.47 mg/g and n = 1.01 & 1.45, respectively. This technology may
prove to be one of the fastest and most techno-economically feasible
methods for the treatment of tar-containing wastewater generated
from BGPs.
Abstract: The cuticular hydrocarbons of Pamphagus elephas
(Orthoptera: Pamphagidae) has been analysed by gas
chromatography and by combined gas chromatograph-mass
spectrometry. The following hydrocarbon classes have been
identified in insect cuticular hydrocarbons are: n-alkanes and
methylalkanes comprising Monomethyl-, dimethyl-and
trimethylalkanes. Sexual dimorphism is observed in long chain
alkanes (C24-C36) present on male and female. The cuticulars
hydrocarbons of P.elephas ranged from 24 to 36 carbons and
incluted n-alkanes, Dimethylalkanes and Trimethylalkanes. nalkanes
represented by (C24-C36,72,7% on male and 79,2% on
female), internally branched Monomethylalkanes identified were
(C25, C30-C32,C35-C37;11% on male and 9,4% on female),
Dimethylalkanes detected are (C31-C32, C36; 2,2% on male and
2,06% on female) and Trimethylalkanes detected are (C32, C36;
3,1% on male and 4, 97 on female). Larvae male and female (stage
7) showed the same quality of n-alkanes observed in adults.
However a difference quantity is noted.
Abstract: Essential hypertension (HTN) usually clusters with other cardiovascular risk factors such as age, overweight, diabetes, insulin resistance and dyslipidemia. The target organ damage (TOD) such as left ventricular hypertrophy, microalbuminuria (MA), acute coronary syndrome (ACS), stroke and cognitive dysfunction takes place early in course of hypertension. Though the prevalence of hypertension is high in India, the relationship between microalbuminuria and target organ damage in hypertension is not well studied. This study aim at detecting MA in essential hypertension and its relation to severity of HTN, duration of HTN, body mass index (BMI), age and TOD such as HTN retinopathy and acute coronary syndrome The present study was done in 100 patients of essential hypertension non diabetics admitted to B.L.D.E.University-s Sri B.M.Patil Medical College, Bijapur, from October 2008 to April 2011. The patients underwent detailed history and clinical examination. Early morning 5 ml of urine sample was collected & MA was estimated by immunoturbidometry method. The relationship of MA with the duration & severity of HTN, BMI, age, sex and TOD's like hypertensive retinopathy, ACS was assessed by univariate analysis. The prevalence of MA in this study was found to be 63 %. In that 42% were male & 21% were female. In this study a significant association between MA and the duration of hypertension (p = 0.036) & (OR =0.438). Longer the duration of hypertension, more possibility of microalbumin in urine. Also there was a significant association between severity of hypertension and MA (p=0.045) and (OR=0.093). MA was positive in 50 (79.4%) patients out of 63, whose blood pressure was >160/100 mm Hg. In this study a significant association between MA and the grades of hypertensive retinopathy (p =0.011) and acute coronary syndrome (p = 0.041) (OR =2.805). Gender and BMI did not pose high risk for MA in this study.The prevalence of MA in essential hypertension is high in this part of the community and MA will increase the risk of developing target organ damage.Early screening of patients with essential hypertension for MA and aggressive management of positive cases might reduce the burden of chronic kidney diseases and cardiovascular diseases in the community.
Abstract: Indian subcontinent has a plethora of traditional
medicine systems that provide promising solutions to lifestyle
disorders in an 'all natural way'. Spices and oilseeds hold
prominence in Indian cuisine hence the focus of the current study
was to evaluate the bioactive molecules from Linum usitatissinum
(LU), Lepidium sativum (LS), Nigella sativa (NS) and Guizotia
abyssinica (GA) seeds. The seeds were characterized for functional
lipids like omega-3 fatty acid, antioxidant capacity, phenolic
compounds, dietary fiber and anti-nutritional factors. Analysis of the
seeds revealed LU and LS to be a rich source of α-linolenic acid
(41.85 ± 0.33%, 26.71 ± 0.63%), an omega 3 fatty acid (using
GCMS). While studying antioxidant potential NS seeds demonstrated
highest antioxidant ability (61.68 ± 0.21 TEAC/ 100 gm DW) due to
the presence of phenolics and terpenes as assayed by the Mass
spectral analysis. When screened for anti-nutritional factor
cyanogenic glycoside, LS seeds showed content as high as 1674 ± 54
mg HCN / kg. GA is a probable good source of a stable vegetable oil
(SFA: PUFA 1:2.3). The seeds showed diversified bioactive profile
and hence further studies to use different bio molecules in tandem for
the development of a possible 'nutraceutical cocktail' have been
initiated..
Abstract: Adsorption of CS2 vapors has been studied on
different types of activated carbons obtained from different source
raw materials. The activated carbons have different surface areas and
are associated with varying amounts of the carbon-oxygen surface
groups. The adsorption of CS2 vapors is not directly related to surface
area, but is considerably influenced by the presence of carbonoxygen
surface groups. The adsorption decreases on increasing the
amount of carbon-oxygen surface groups on oxidation and increases
when these surface groups are eliminated on degassing. The
adsorption is maximum in case of the 950°-degassed carbon sample
which is almost completely free of any associated oxygen. The
kinetic data as analysed by Empirical diffusion model and Linear
driving force mass transfer model indicate that the adsorption does
not involve Fickian diffusion but may be considered as a pseudo first
order mass transfer process. The activation energy of adsorption and
isosteric enthalpies of adsorption indicate that the adsorption does not
involve interaction between CS2 and carbon-oxygen surface groups,
but hydrophobic interactions between CS2 and C-C atoms in the
carbon lattice.
Abstract: Consider a mass production of HDD arms where
hundreds of CNC machines are used to manufacturer the HDD arms.
According to an overwhelming number of machines and models of
arm, construction of separate control chart for monitoring each HDD
arm model by each machine is not feasible. This research proposed a
strategy to optimize the SPC management on shop floor. The
procedure started from identifying the clusters of the machine with
similar manufacturing performance using clustering technique. The
three way control chart ( I - MR - R ) is then applied to each
clustered group of machine. This proposed research has
advantageous to the manufacturer in terms of not only better
performance of the SPC but also the quality management paradigm.
Abstract: In this study, the theoretical relationship between pressure and density was investigated on cylindrical hollow fuel briquettes produced of a mixture of fibrous biomass material using a screw press without any chemical binder. The fuel briquettes were made of biomass and other waste material such as spent coffee beans, mielie husks, saw dust and coal fines under pressures of 0.878-2.2 Mega Pascals (MPa). The material was densified into briquettes of outer diameter of 100mm, inner diameter of 35mm and 50mm long. It was observed that manual screw compression action produces briquettes of relatively low density as compared to the ones made using hydraulic compression action. The pressure and density relationship was obtained in the form of power law and compare well with other cylindrical solid briquettes made using hydraulic compression action. The produced briquettes have a dry density of 989 kg/m3 and contain 26.30% fixed carbon, 39.34% volatile matter, 10.9% moisture and 10.46% ash as per dry proximate analysis. The bomb calorimeter tests have shown the briquettes yielding a gross calorific value of 18.9MJ/kg.
Abstract: The presented work is motivated by a French law
regarding nuclear waste management. A new conceptual Accelerator
Driven System (ADS) designed for the Minor Actinides (MA)
transmutation has been assessed by numerical simulation. The
MUltiple Spallation Target (MUST) ADS combines high thermal power (up to 1.4 GWth) and high specific power. A 30 mA and 1
GeV proton beam is divided into three secondary beams transmitted on three liquid lead-bismuth spallation targets. Neutron and thermalhydraulic
simulations have been performed with the code MURE, based on the Monte-Carlo transport code MCNPX. A methodology has been developed to define characteristic of the MUST ADS concept according to a specific transmutation scenario. The reference
scenario is based on a MA flux (neptunium, americium and curium)
providing from European Fast Reactor (EPR) and a plutonium multireprocessing
strategy is accounted for. The MUST ADS reference
concept is a sodium cooled fast reactor. The MA fuel at equilibrium is mixed with MgO inert matrix to limit the core reactivity and
improve the fuel thermal conductivity. The fuel is irradiated over five
years. Five years of cooling and two years for the fuel fabrication are
taken into account. The MUST ADS reference concept burns about 50% of the initial MA inventory during a complete cycle. In term of
mass, up to 570 kg/year are transmuted in one concept. The methodology to design the MUST ADS and to calculate fuel
composition at equilibrium is precisely described in the paper. A detailed fuel evolution analysis is performed and the reference scenario is compared to a scenario where only americium transmutation is performed.
Abstract: This project aims to investigate the potential of
torrefaction to improve the properties of Malaysian palm kernel shell
(PKS) as a solid fuel. A study towards torrefaction of PKS was
performed under various temperature and residence time of 240, 260,
and 280oC and 30, 60, and 90 minutes respectively. The torrefied
PKS was characterized in terms of the mass yield, energy yield,
elemental composition analysis, calorific value analysis, moisture and
volatile matter contents, and ash and fixed carbon contents. The mass
and energy yield changes in the torrefied PKS were observed to
prove that the temperature has more effect compare to residence time
in the torrefaction process. The C content of PKS increases while H
and O contents decrease after torrefaction, which resulted in higher
heating value between 5 to 16%. Meanwhile, torrefaction caused the
ash and fixed carbon content of PKS to increase, and the moisture
and volatile matter to decrease.