Abstract: Paper deals with the topic of questions as important
components of information behavior in the school. By analyzing the
Corpus Schola2010, the state of contemporary education in terms of
questioning is proven unsatisfactory: 80% of the questions are asked
by teachers; most of teacher-s questions are asked at the beginning of
the first grade, than their number decreases and is settling down on
80±10 questions per lesson. The average number of questions within
one lesson per one pupil is generally less than one whole question.
The highest values are achieved in the first, sixth, eighth and tenth
grade,, i.e. in the transition years in which pupils are moving into
higher levels of education and every following year it declines. We
can state Czech school do not support questioning and question skill
of their pupils, thereby typical Czech schools are neglecting the
development of thinking, reasoning and cooperation of their pupils.
Abstract: Embedding and extraction of a secret information as
well as the restoration of the original un-watermarked image is
highly desirable in sensitive applications like military, medical, and
law enforcement imaging. This paper presents a novel reversible
data-hiding method for digital images using integer to integer
wavelet transform and companding technique which can embed and
recover the secret information as well as can restore the image to its
pristine state. The novel method takes advantage of block based
watermarking and iterative optimization of threshold for companding
which avoids histogram pre and post-processing. Consequently, it
reduces the associated overhead usually required in most of the
reversible watermarking techniques. As a result, it keeps the
distortion small between the marked and the original images.
Experimental results show that the proposed method outperforms the
existing reversible data hiding schemes reported in the literature.
Abstract: The purposes of this paper are to (1) promote
excellence in computer science by suggesting a cohesive innovative
approach to fill well documented deficiencies in current computer
science education, (2) justify (using the authors- and others anecdotal
evidence from both the classroom and the real world) why this
approach holds great potential to successfully eliminate the
deficiencies, (3) invite other professionals to join the authors in proof
of concept research. The authors- experiences, though anecdotal,
strongly suggest that a new approach involving visual modeling
technologies should allow computer science programs to retain a
greater percentage of prospective and declared majors as students
become more engaged learners, more successful problem-solvers,
and better prepared as programmers. In addition, the graduates of
such computer science programs will make greater contributions to
the profession as skilled problem-solvers. Instead of wearily
rememorizing code as they move to the next course, students will
have the problem-solving skills to think and work in more
sophisticated and creative ways.
Abstract: Surveillance system is widely used in the traffic
monitoring. The deployment of cameras is moving toward a
ubiquitous camera (UbiCam) environment. In our previous study, a
novel service, called GPS-VT, was firstly proposed by incorporating
global positioning system (GPS) and visual tracking techniques for
the UbiCam environment. The first prototype is called GODTA
(GPS-based Moving Object Detection and Tracking Approach). For a
moving person carried GPS-enabled mobile device, he can be
tracking when he enters the field-of-view (FOV) of a camera
according to his real-time GPS coordinate. In this paper, GPS-VT
service is applied to the tracking of vehicles. The moving speed of a
vehicle is much faster than a person. It means that the time passing
through the FOV is much shorter than that of a person. Besides, the
update interval of GPS coordinate is once per second, it is
asynchronous with the frame rate of the real-time image. The above
asynchronous is worsen by the network transmission delay. These
factors are the main challenging to fulfill GPS-VT service on a
vehicle.In order to overcome the influence of the above factors, a
back-propagation neural network (BPNN) is used to predict the
possible lane before the vehicle enters the FOV of a camera. Then, a
template matching technique is used for the visual tracking of a target
vehicle. The experimental result shows that the target vehicle can be
located and tracking successfully. The success location rate of the
implemented prototype is higher than that of the previous GODTA.
Abstract: In the domain of machine vision, the
measurement of length is done using cameras where the
accuracy is directly proportional to the resolution of the
camera and inversely to the size of the object. Since most of
the pixels are wasted imaging the entire body as opposed to
just imaging the edges in a conventional system, a double
aperture system is constructed to focus on the edges to
measure at higher resolution. The paper discusses the
complexities and how they are mitigated to realize a practical
machine vision system.
Abstract: In this study, we are interested in the economic lot
scheduling problem (ELSP) that considers manufacturing of the
serviceable products and remanufacturing of the reworked products. In
this paper, we formulate a mathematical model for the ELSP with
reworks using the basic period approach. In order to solve this
problem, we propose a search algorithm to find the cyclic multiplier ki
of each product that can be cyclically produced for every ki basic
periods. This research also uses two heuristics to search for the optimal
production sequence of all lots and the optimal time length of the basic
period so as to minimize the average total cost. This research uses a
numerical example to show the effectiveness of our approach.
Abstract: Clearance in the joints of multibody mechanical
systems such as linkage mechanisms and robots is a main source of
vibration, and noise of the whole system, and wear of the joints
themselves. This clearance is an inevitable matter and cannot be
eliminated, since it allows the relative motion between joint
components and make them assemblage. This paper presents an
experimental verification of the obtained simulation results of a slider
– crank mechanism of one clearance revolute joint. The simulation
results are obtained with the aid of CAD and dynamic simulation
softwares, which is an effective method of simulation multibody
systems with clearance joints and have many advantages. The
comparison between both simulation and experimental results shows
that the simulation results are so close to the experimental ones which
proves the accuracy and efficiency of this method of modeling and
simulation of mechanical systems with clearance joints.
Abstract: Environmental accounting is a recent phenomenon in the modern jurisprudence. It may reflect the corporate governance mechanisms in line with the natural resources and environmental sound management and administration systems in any country of the world. It may be a corporate focused on the improving of the environmental quality. But it is often identified that it is ignored due to some reasons such as unconsciousness, lack of ethical education etc. At present, the world community is very much concerned about the state of the environmental accounting and auditing systems as it bears sustainability on the mother earth for our generations. It is one of the important tools for understanding on the role played by the natural environment in the economy. It provides adequate data which is highlighted both in the contribution of natural resources to economic well-being as well as the costs imposed by pollution or resource degradation. It can play a critical role as on be a part of the many international environmental organizations such as IUCN, WWF, PADELIA, WRI etc.; as they have been taking many initiatives for ensuring the environmental accouting for our competent survivals. The global state actors have already taken some greening accounting initiatives under the forum of the United Nations Division for Sustainable Dedevolpment, the United Nations Statistical Division, the United Nations Conference on Environment and development known as Earth Summit in Rio de Janeiro, Johannesburg Conference 2002 etc. This study will provide an overview of the environmental accounting education consisting of 25 respondents based on the primary and secondary sources.
Abstract: Theoptimal extraction condition of dried Phaseolus
vulgaris powderwas studied. The three independent variables are raw
material concentration, shaking and centrifugaltime. The dependent
variables are both yield percentage of crude extract and alphaamylase
enzyme inhibition activity. The experimental design was
based on box-behnkendesign. Highest yield percentage of crude
extract could get from extraction condition at concentration of 1, 0,1,
concentration of 0.15 M ,extraction time for 2hour, and
separationtime for60 min. Moreover, the crude extract with highest
alpha-amylase enzyme inhibition activityoccurred by extraction
condition at concentration of 0.10 M, extraction time for 2 min, and
separation time for 45 min
Abstract: We propose a low-cost uniform analysis framework
allowing comparison of the strengths and weaknesses of the
bicycling experience within and between cities. A primary
component is an expedient, one-page mobility survey from which
mode share is calculated. The bicycle mode share of many cities
remains unknown, creating a serious barrier for both scientists and
policy makers aiming to understand and increase rates of bicycling.
Because of its low cost and expedience, this framework could be
replicated widely, uniformly filling the data gap. The framework has
been applied to 13 Central European cities with success. Data is
collected on multiple modes with specific questions regarding both
behavior and quality of travel experience. Individual preferences are
also collected, examining the conditions under which respondents
would change behavior to adopt more sustainable modes (bicycling
or public transportation). A broad analysis opportunity results,
intended to inform policy choices.
Abstract: Least Development Countries (LDC) like
Bangladesh, whose 25% revenue earning is achieved from Textile
export, requires producing less defective textile for minimizing
production cost and time. Inspection processes done on these
industries are mostly manual and time consuming. To reduce error
on identifying fabric defects requires more automotive and
accurate inspection process. Considering this lacking, this research
implements a Textile Defect Recognizer which uses computer
vision methodology with the combination of multi-layer neural
networks to identify four classifications of textile defects. The
recognizer, suitable for LDC countries, identifies the fabric defects
within economical cost and produces less error prone inspection
system in real time. In order to generate input set for the neural
network, primarily the recognizer captures digital fabric images by
image acquisition device and converts the RGB images into binary
images by restoration process and local threshold techniques.
Later, the output of the processed image, the area of the faulty
portion, the number of objects of the image and the sharp factor of
the image, are feed backed as an input layer to the neural network
which uses back propagation algorithm to compute the weighted
factors and generates the desired classifications of defects as an
output.
Abstract: Metal matrix composites have been increasingly used
as materials for components in automotive and aerospace industries
because of their improved properties compared with non-reinforced
alloys. During machining the selection of appropriate machining
parameters to produce job for desired surface roughness is of great
concern considering the economy of manufacturing process. In this
study, a surface roughness prediction model using fuzzy logic is
developed for end milling of Al-SiCp metal matrix composite
component using carbide end mill cutter. The surface roughness is
modeled as a function of spindle speed (N), feed rate (f), depth of cut
(d) and the SiCp percentage (S). The predicted values surface
roughness is compared with experimental result. The model predicts
average percentage error as 4.56% and mean square error as 0.0729.
It is observed that surface roughness is most influenced by feed rate,
spindle speed and SiC percentage. Depth of cut has least influence.
Abstract: One of the most challenges for hard surface cleaning product is to get rid of soap scum, a filmy sticky layer in the bathroom. The deposits of soap scum can be removed by using a proper surfactant solution with chelating agent. Unfortunately, the conventional chelating agent, ethylenediamine tetraacetic acid (EDTA), has low biodegradability, which can be tolerance in water resources and harmful to aquatic animal and microorganism. In this study, two biodegradable chelating agents, ethylenediamine disuccinic acid (EDDS) and glutamic acid diacetic acid (GLDA) were introduced as a replacement of EDTA. The result shows that using GLDA with amphoteric surfactant gave the highest equilibrium solubility of soap scum.
Abstract: This paper presents a new methodology to study power and energy consumption in mechatronic systems early in the development process. This new approach makes use of two modeling languages to represent and simulate embedded control software and electromechanical subsystems in the discrete event and continuous time domain respectively within a single co-model. This co-model enables an accurate representation of power and energy consumption and facilitates the analysis and development of both software and electro-mechanical subsystems in parallel. This makes the engineers aware of energy-wise implications of different design alternatives and enables early trade-off analysis from the beginning of the analysis and design activities.
Abstract: This research aimed at investigating the Cr (III), Cd
(II) and Pb (II) removal efficiencies by using the newly synthesized
metal oxides/ polyethersulfone (PES), Al2O3/PES and ZrO2/PES,
membranes from synthetic wastewater and exploring fouling
mechanisms. A Comparative study between the removal efficiencies
of Cr (III), Cd (II) and Pb (II) from synthetic and natural wastewater
by using adsorption onto agricultural by products and the newly
synthesized Al2O3/PES and ZrO2/PES membranes was conducted to
assess the advantages and limitations of using the metal oxides/PES
membranes for heavy metals removal. The results showed that about
99 % and 88 % removal efficiencies were achieved by the tested
membranes for Pb (II) and Cr (III), respectively.
Abstract: The resource-based view of the firm regards
knowledge as one of the most important organizational assets and a
key strategic resource that contributes unique value to organizations.
The acquisition, absorption and internalization of external
knowledge are central to an organization-s innovative capabilities.
This ability to evaluate, acquire and integrate new knowledge from
its environment is referred to as a firm-s absorptive capacity (AC).
This research in progress paper explores the link between interorganizational
Social Networks (SNs) and a firm-s Absorptive
Capacity (AC). Based on an in-depth literature survey of both
concepts, four propositions are proposed that explain the link
between AC and SNs. These propositions suggest that SNs are key
to a firm-s AC. A qualitative research method is proposed to test the
set of propositions in the next stage of this research.
Abstract: The development of biomimetic micro-aerial-vehicles
(MAVs) with flapping wings is the future trend in military/domestic
field. The successful flight of MAVs is strongly related to the
understanding of unsteady aerodynamic performance of low Reynolds
number airfoils under dynamic flapping motion. This study explored
the effects of flapping frequency, stroke amplitude, and the inclined
angle of stroke plane on lift force and thrust force of a bio-inspiration
corrugated airfoil with 33 full factorial design of experiment and
ANOVA analysis. Unsteady vorticity flows over a corrugated thin
airfoil executing flapping motion are computed with time-dependent
two-dimensional laminar incompressible Reynolds-averaged
Navier-Stokes equations with the conformal hybrid mesh. The tested
freestream Reynolds number based on the chord length of airfoil as
characteristic length is fixed of 103. The dynamic mesh technique is
applied to model the flapping motion of a corrugated airfoil. Instant
vorticity contours over a complete flapping cycle clearly reveals the
flow mechanisms for lift force generation are dynamic stall, rotational
circulation, and wake capture. The thrust force is produced as the
leading edge vortex shedding from the trailing edge of airfoil to form a
reverse von Karman vortex. Results also indicated that the inclined
angle is the most significant factor on both the lift force and thrust
force. There are strong interactions between tested factors which mean
an optimization study on parameters should be conducted in further
runs.
Abstract: The aim of this study was to demonstrate the possible
effect of some variables such as age, gender, blood sugar level, and
duration of diabetes on the serum level of zinc in diabetic individuals
from Murzuk area. Serum zinc (Zn), Fasting blood sugar (FBS),
hemoglobin HbA1c (HbA1c) were evaluated in 46 type I diabetic
subjects (group 1), 48 type II diabetic subjects (group 2) and 43
healthy individuals (control) of both genders aged (30-81) years. Data
showed that both diabetic groups have significantly higher (P0.05) differences in serum Zn levels were observed
between Males and Females. Serum Zn levels were non-significantly
decreased with increasing age. In type II diabetic subjects, serum Zn
levels were non-significantly decreased with increasing duration of
disease whereas those in type I were non-significantly increased.
Abstract: Aim of this study is to evaluate a new three-equation turbulence model applied to flow and heat transfer through a pipe. Uncertainty is approximated by comparing with published direct numerical simulation results for fully-developed flow. Error in the mean axial velocity, temperature, friction, and heat transfer is found to be negligible.
Abstract: XML data consists of a very flexible tree-structure
which makes it difficult to support the storing and retrieving of XML
data. The node numbering scheme is one of the most popular
approaches to store XML in relational databases. Together with the
node numbering storage scheme, structural joins can be used to
efficiently process the hierarchical relationships in XML. However, in
order to process a tree-structured XPath query containing several
hierarchical relationships and conditional sentences on XML data,
many structural joins need to be carried out, which results in a high
query execution cost. This paper introduces mechanisms to reduce the
XPath queries including branch nodes into a much more efficient form
with less numbers of structural joins. A two step approach is proposed.
The first step merges duplicate nodes in the tree-structured query and
the second step divides the query into sub-queries, shortens the paths
and then merges the sub-queries back together. The proposed
approach can highly contribute to the efficient execution of XML
queries. Experimental results show that the proposed scheme can
reduce the query execution cost by up to an order of magnitude of the
original execution cost.