Abstract: Using Internet communication, new home electronics
have functions of monitoring and control from remote. However in
many case these electronics work as standalone, and old electronics
are not followed. Then, we developed the total remote system include
not only new electronics but olds. This systems node is a adapter of
electrical power plug that embed relay switch and some sensors, and
these nodes communicate with each other. the system server was build
on the Internet, and users access to this system from web browsers.
To reduce the cost to set up of this system, communication between
adapters are used ZigBee wireless network instead of wired LAN
cable[3]. From measured RSSI(received signal strength indicator)
information between each nodes, the system can estimate roughly
adapters were mounted on which room, and where in the room. So
also it reduces the cost of mapping nodes. Using this system, energy
saving and house monitoring are expected.
Abstract: Series of experimental tests were conducted on a
section of a 660 kW wind turbine blade to measure the pressure
distribution of this model oscillating in plunging motion. In order to
minimize the amount of data required to predict aerodynamic loads
of the airfoil, a General Regression Neural Network, GRNN, was
trained using the measured experimental data. The network once
proved to be accurate enough, was used to predict the flow behavior
of the airfoil for the desired conditions.
Results showed that with using a few of the acquired data, the
trained neural network was able to predict accurate results with
minimal errors when compared with the corresponding measured
values. Therefore with employing this trained network the
aerodynamic coefficients of the plunging airfoil, are predicted
accurately at different oscillation frequencies, amplitudes, and angles
of attack; hence reducing the cost of tests while achieving acceptable
accuracy.
Abstract: This paper investigates the application of Particle Swarm Optimization (PSO) technique for coordinated design of a Power System Stabilizer (PSS) and a Thyristor Controlled Series Compensator (TCSC)-based controller to enhance the power system stability. The design problem of PSS and TCSC-based controllers is formulated as a time domain based optimization problem. PSO algorithm is employed to search for optimal controller parameters. By minimizing the time-domain based objective function, in which the deviation in the oscillatory rotor speed of the generator is involved; stability performance of the system is improved. To compare the capability of PSS and TCSC-based controller, both are designed independently first and then in a coordinated manner for individual and coordinated application. The proposed controllers are tested on a weakly connected power system. The eigenvalue analysis and non-linear simulation results are presented to show the effectiveness of the coordinated design approach over individual design. The simulation results show that the proposed controllers are effective in damping low frequency oscillations resulting from various small disturbances like change in mechanical power input and reference voltage setting.
Abstract: This research is aimed to describe the application of robust regression and its advantages over the least square regression method in analyzing financial data. To do this, relationship between earning per share, book value of equity per share and share price as price model and earning per share, annual change of earning per share and return of stock as return model is discussed using both robust and least square regressions, and finally the outcomes are compared. Comparing the results from the robust regression and the least square regression shows that the former can provide the possibility of a better and more realistic analysis owing to eliminating or reducing the contribution of outliers and influential data. Therefore, robust regression is recommended for getting more precise results in financial data analysis.
Abstract: Workflow Management Systems (WfMS) alloworganizations to streamline and automate business processes and reengineer their structure. One important requirement for this type of system is the management and computation of the Quality of Service(QoS) of processes and workflows. Currently, a range of Web processes and workflow languages exist. Each language can be characterized by the set of patterns they support. Developing andimplementing a suitable and generic algorithm to compute the QoSof processes that have been designed using different languages is a difficult task. This is because some patterns are specific to particular process languages and new patterns may be introduced in future versions of a language. In this paper, we describe an adaptive algorithm implemented to cope with these two problems. The algorithm is called adaptive since it can be dynamically changed as the patterns of a process language also change.
Abstract: A novel idea presented in this paper is to combine
multihop routing with single-frequency networks (SFNs) for a
broadcasting scenario. An SFN is a set of multiple nodes that transmit
the same data simultaneously, resulting in transmitter macrodiversity.
Two of the most important performance factors of multihop
networks, node reachability and routing robustness, are analyzed.
Simulation results show that our proposed SFN-D routing algorithm
improves the node reachability by 37 percentage points as compared
to non-SFN multihop routing. It shows a diversity gain of 3.7 dB,
meaning that 3.7 dB lower transmission powers are required for the
same reachability. Even better results are possible for larger
networks. If an important node becomes inactive, this algorithm can
find new routes that a non-SFN scheme would not be able to find.
Thus, two of the major problems in multihopping are addressed;
achieving robust routing as well as improving node reachability or
reducing transmission power.
Abstract: In this paper, we propose a dynamic TDMA slot
reservation (DTSR) protocol for cognitive radio ad hoc networks.
Quality of Service (QoS) guarantee plays a critically important role
in such networks. We consider the problem of providing QoS
guarantee to users as well as to maintain the most efficient use of
scarce bandwidth resources. According to one hop neighboring
information and the bandwidth requirement, our proposed protocol
dynamically changes the frame length and the transmission schedule.
A dynamic frame length expansion and shrinking scheme that
controls the excessive increase of unassigned slots has been
proposed. This method efficiently utilizes the channel bandwidth by
assigning unused slots to new neighboring nodes and increasing the
frame length when the number of slots in the frame is insufficient to
support the neighboring nodes. It also shrinks the frame length when
half of the slots in the frame of a node are empty. An efficient slot
reservation protocol not only guarantees successful data
transmissions without collisions but also enhance channel spatial
reuse to maximize the system throughput. Our proposed scheme,
which provides both QoS guarantee and efficient resource utilization,
be employed to optimize the channel spatial reuse and maximize the
system throughput. Extensive simulation results show that the
proposed mechanism achieves desirable performance in multichannel
multi-rate cognitive radio ad hoc networks.
Abstract: The paper discusses optimising work on a method of processing ceramic / metal composite coatings for various applications and is based on preliminary work on processing anodes for solid oxide fuel cells (SOFCs). The composite coating is manufactured by the electroless co-deposition of nickel and yttria stabilised zirconia (YSZ) simultaneously on to a ceramic substrate. The effect on coating characteristics of substrate surface treatments and electroless nickel bath parameters such as pH and agitation methods are also investigated. Characterisation of the resulting deposit by scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDXA) is also discussed.
Abstract: This paper introduces a novel design for boring bar with enhanced damping capability. The principle followed in the design phase was to enhance the damping capability minimizing the loss in static stiffness through implementation of composite material interfaces. The newly designed tool has been compared to a conventional tool. The evaluation criteria were the dynamic characteristics, frequency and damping ratio, of the machining system, as well as the surface roughness of the machined workpieces. The use of composite material in the design of damped tool has been demonstrated effective. Furthermore, the autoregressive moving average (ARMA) models presented in this paper take into consideration the interaction between the elastic structure of the machine tool and the cutting process and can therefore be used to characterize the machining system in operational conditions.
Abstract: In the Equivalent Transformation (ET) computation
model, a program is constructed by the successive accumulation of
ET rules. A method by meta-computation by which a correct ET
rule is generated has been proposed. Although the method covers a
broad range in the generation of ET rules, all important ET rules
are not necessarily generated. Generation of more ET rules can be
achieved by supplementing generation methods which are specialized
for important ET rules. A Specialization-by-Equation (Speq) rule is
one of those important rules. A Speq rule describes a procedure in
which two variables included in an atom conjunction are equalized
due to predicate constraints. In this paper, we propose an algorithm
that systematically and recursively generate Speq rules and discuss
its effectiveness in the synthesis of ET programs. A Speq rule is
generated based on proof of a logical formula consisting of given
atom set and dis-equality. The proof is carried out by utilizing some
ET rules and the ultimately obtained rules in generating Speq rules.
Abstract: The link between Gröbner basis and linear algebra was
described by Lazard [4,5] where he realized the Gr¨obner basis
computation could be archived by applying Gaussian elimination over
Macaulay-s matrix .
In this paper, we indicate how same technique may be used to
SAGBI- Gröbner basis computations in invariant rings.
Abstract: Microstrip lines, widely used for good reason, are
broadband in frequency and provide circuits that are compact and
light in weight. They are generally economical to produce since they
are readily adaptable to hybrid and monolithic integrated circuit (IC)
fabrication technologies at RF and microwave frequencies. Although,
the existing EM simulation models used for the synthesis and
analysis of microstrip lines are reasonably accurate, they are
computationally intensive and time consuming. Neural networks
recently gained attention as fast and flexible vehicles to microwave
modeling, simulation and optimization. After learning and
abstracting from microwave data, through a process called training,
neural network models are used during microwave design to provide
instant answers to the task learned.This paper presents simple and
accurate ANN models for the synthesis and analysis of Microstrip
lines to more accurately compute the characteristic parameters and
the physical dimensions respectively for the required design
specifications.
Abstract: Avionic software architecture has transit from a
federated avionics architecture to an integrated modular avionics
(IMA) .ARINC 653 (Avionics Application Standard Software Interface) is a software specification for space and time partitioning in
Safety-critical avionics Real-time operating systems. Methods to transform the abstract avionics application logic function to the
executable model have been brought up, however with less
consideration about the code generating input and output model specific for ARINC 653 platform and inner-task synchronous dynamic
interaction order sequence. In this paper, we proposed an
AADL-based model-driven design methodology to fulfill the purpose
to automatically generating Cµ executable model on ARINC 653 platform from the ARINC653 architecture which defined as AADL653 in order to facilitate the development of the avionics software constructed on ARINC653 OS. This paper presents the
mapping rules between the AADL653 elements and the elements in
Cµ language, and define the code generating rules , designs an automatic C µ code generator .Then, we use a case to illustrate our
approach. Finally, we give the related work and future research directions.
Abstract: Experiments were carried out at the Latvia State
Institute of Fruit-Growing in 2011. Fresh-cut minimally processed
apple and pear mixed salad were packed by passive modified
atmosphere (MAP) in PP containers, which were hermetically sealed
by breathable conventional BOPP PropafreshTM P2GAF, and Amcor
Agrifresh films. Biodegradable NatureFlexTM NVS INNOVIA Films
and VC999 BioPack PLA films coated with a barrier of pure silicon
oxide (SiOx) were used to compare the fresh-cut produce quality
with this packed in conventional packaging films. Samples were cold
stored at temperature +4.0±0.5 °C up to 10 days. The quality of salad
was evaluated by physicochemical properties – weight losses,
moisture, firmness, the effect of packaging modes on the colour,
dynamics in headspace atmosphere concentration (CO2 and O2),
titratable acidity values, as well as by microbiological contamination
(yeasts, moulds and total bacteria count) of salads, analyzing before
packaging and after 2, 4, 6, 8, and 10 storage days.
Abstract: Several studies have been carried out, using various techniques, including neural networks, to discriminate vigilance states in humans from electroencephalographic (EEG) signals, but we are still far from results satisfactorily useable results. The work presented in this paper aims at improving this status with regards to 2 aspects. Firstly, we introduce an original procedure made of the association of two neural networks, a self organizing map (SOM) and a learning vector quantization (LVQ), that allows to automatically detect artefacted states and to separate the different levels of vigilance which is a major breakthrough in the field of vigilance. Lastly and more importantly, our study has been oriented toward real-worked situation and the resulting model can be easily implemented as a wearable device. It benefits from restricted computational and memory requirements and data access is very limited in time. Furthermore, some ongoing works demonstrate that this work should shortly results in the design and conception of a non invasive electronic wearable device.
Abstract: In this paper the supersonic ejectors are
experimentally and analytically studied. Ejector is a device that
uses the energy of a fluid to move another fluid. This device works
like a vacuum pump without usage of piston, rotor or any other
moving component. An ejector contains an active nozzle, a passive
nozzle, a mixing chamber and a diffuser. Since the fluid viscosity
is large, and the flow is turbulent and three dimensional in the
mixing chamber, the numerical methods consume long time and
high cost to analyze the flow in ejectors. Therefore this paper
presents a simple analytical method that is based on the precise
governing equations in fluid mechanics. According to achieved
analytical relations, a computer code has been prepared to analyze
the flow in different components of the ejector. An experiment has
been performed in supersonic regime 1.5
Abstract: Many research works are carried out on the analysis of
traces in a digital learning environment. These studies produce large
volumes of usage tracks from the various actions performed by a
user. However, to exploit these data, compare and improve
performance, several issues are raised. To remedy this, several works
deal with this problem seen recently. This research studied a series of
questions about format and description of the data to be shared. Our
goal is to share thoughts on these issues by presenting our experience
in the analysis of trace-based log files, comparing several approaches
used in automatic classification applied to e-learning platforms.
Finally, the obtained results are discussed.
Abstract: The most common domestic birds live in Turkey are: crows (Corvus corone), pigeons (Columba livia), sparrows (Passer domesticus), starlings (Sturnus vulgaris) and blackbirds (Turdus merula). These birds give damage to the agricultural areas and make dirty the human life areas. In order to send away these birds, some different materials and methods such as chemicals, treatments, colored lights, flash and audible scarers are used. It is possible to see many studies about chemical methods in the literatures. However there is not enough works regarding audible bird scarers are reported in the literature. Therefore, a solar powered bird scarer was designed, manufactured and tested in this experimental investigation. Firstly, to understand the sensitive level of these domestic birds against to the audible scarer, many series preliminary studies were conducted. These studies showed that crows are the most resistant against to the audible bird scarer when compared with pigeons, sparrows, starlings and blackbirds. Therefore the solar powered audible bird scarer was tested on crows. The scarer was tested about one month during April- May, 2007. 18 different common known predators- sounds (voices or calls) of domestic birds from Falcon (Falco eleonorae), Falcon (Buteo lagopus), Eagle (Aquila chrysaetos), Montagu-s harrier (Circus pygargus) and Owl (Glaucidium passerinum) were selected for test of the scarer. It was seen from the results that the reaction of the birds was changed depending on the predators- sound type, camouflage of the scarer, sound quality and volume, loudspeaker play and pause periods in one application. In addition, it was also seen that the sound from Falcon (Buteo lagopus) was most effective on crows and the scarer was enough efficient.
Abstract: The focus in this work is to assess which method
allows a better forecasting of malaria cases in Bujumbura ( Burundi)
when taking into account association between climatic factors and
the disease. For the period 1996-2007, real monthly data on both
malaria epidemiology and climate in Bujumbura are described and
analyzed. We propose a hierarchical approach to achieve our
objective. We first fit a Generalized Additive Model to malaria cases
to obtain an accurate predictor, which is then used to predict future
observations. Various well-known forecasting methods are compared
leading to different results. Based on in-sample mean average
percentage error (MAPE), the multiplicative exponential smoothing
state space model with multiplicative error and seasonality performed
better.
Abstract: One of the essential sectors of Myanmar economy is
agriculture which is sensitive to climate variation. The most
important climatic element which impacts on agriculture sector is
rainfall. Thus rainfall prediction becomes an important issue in
agriculture country. Multi variables polynomial regression (MPR)
provides an effective way to describe complex nonlinear input output
relationships so that an outcome variable can be predicted from the
other or others. In this paper, the modeling of monthly rainfall
prediction over Myanmar is described in detail by applying the
polynomial regression equation. The proposed model results are
compared to the results produced by multiple linear regression model
(MLR). Experiments indicate that the prediction model based on
MPR has higher accuracy than using MLR.