Abstract: It is difficult to judge ripeness by outward
characteristics such as size or external color. In this paper a nondestructive
method was studied to determine watermelon (Crimson
Sweet) quality. Responses of samples to excitation vibrations were
detected using laser Doppler vibrometry (LDV) technology. Phase
shift between input and output vibrations were extracted overall
frequency range. First and second were derived using frequency
response spectrums. After nondestructive tests, watermelons were
sensory evaluated. So the samples were graded in a range of ripeness
based on overall acceptability (total desired traits consumers).
Regression models were developed to predict quality using obtained
results and sample mass. The determination coefficients of the
calibration and cross validation models were 0.89 and 0.71
respectively. This study demonstrated feasibility of information
which is derived vibration response curves for predicting fruit
quality. The vibration response of watermelon using the LDV method
is measured without direct contact; it is accurate and timely, which
could result in significant advantage for classifying watermelons
based on consumer opinions.
Abstract: The aim of this study is to emphasize the opportunities in space design under the aspect of HCI as performance areas. HCI is a multidisciplinary approach that could be identified in many different areas. The aesthetical reflections of HCI by virtual reality in space design are the high-tech solutions of the new innovations as computational facilities by artistic features. The method of this paper is to identify the subject in 3 main parts. In the first part a general approach and definition of interactivity on the basis of space design; in the second part the concept of multimedia interactive theater by some chosen samples from the world and interactive design aspects; in the third part the samples from Turkey will be identified by stage designing principles. In the results it could be declared that the multimedia database is the virtual approach of theatre stage designing regarding interactive means by computational facilities according to aesthetical aspects. HCI is mostly identified in theatre stages as computational intelligence under the affect of interactivity.
Abstract: The linear methods of heart rate variability analysis
such as non-parametric (e.g. fast Fourier transform analysis) and
parametric methods (e.g. autoregressive modeling) has become an
established non-invasive tool for marking the cardiac health, but their
sensitivity and specificity were found to be lower than expected with
positive predictive value
Abstract: Hexapod Machine Tool (HMT) is a parallel robot
mostly based on Stewart platform. Identification of kinematic
parameters of HMT is an important step of calibration procedure. In
this paper an algorithm is presented for identifying the kinematic
parameters of HMT using inverse kinematics error model. Based on
this algorithm, the calibration procedure is simulated. Measurement
configurations with maximum observability are decided as the first
step of this algorithm for a robust calibration. The errors occurring in
various configurations are illustrated graphically. It has been shown
that the boundaries of the workspace should be searched for the
maximum observability of errors. The importance of using
configurations with sufficient observability in calibrating hexapod
machine tools is verified by trial calibration with two different
groups of randomly selected configurations. One group is selected to
have sufficient observability and the other is in disregard of the
observability criterion. Simulation results confirm the validity of the
proposed identification algorithm.
Abstract: CT assessment of postoperative spine is challenging in the presence of metal streak artifacts that could deteriorate the
quality of CT images. In this paper, we studied the influence of different acquisition parameters on the magnitude of metal streaking.
A water-bath phantom was constructed with metal insertion similar with postoperative spine assessment. The phantom was scanned with
different acquisition settings and acquired data were reconstructed
using various reconstruction settings. Standardized ROIs were defined within streaking region for image analysis. The result shows
increased kVp and mAs enhanced SNR values by reducing image
noise. Sharper kernel enhanced image quality compared to smooth
kernel, but produced more noise in the images with higher CT fluctuation. The noise between both kernels were significantly
different (P
Abstract: Rotating stages in semiconductor, display industry and many other fields require challenging accuracy to perform their functions properly. Especially, Axis of rotation error on rotary system is significant; such as the spindle error motion of the aligner, wire bonder and inspector machine which result in the poor state of manufactured goods. To evaluate and improve the performance of such precision rotary stage, unessential movements on the other 5 degrees of freedom of the rotary stage must be measured and analyzed. In this paper, we have measured the three translations and two tilt motions of a rotating stage with high precision capacitive sensors. To obtain the radial error motion from T.I.R (Total Indicated Reading) of radial direction, we have used Donaldson's reversal technique. And the axial components of the spindle tilt error motion can be obtained accurately from the axial direction outputs of sensors by Estler face motion reversal technique. Further more we have defined and measured the sensitivity of positioning error to the five error motions.
Abstract: The new idea of this research is application of a new fault detection and isolation (FDI) technique for supervision of sensor networks in transportation system. In measurement systems, it is necessary to detect all types of faults and failures, based on predefined algorithm. Last improvements in artificial neural network studies (ANN) led to using them for some FDI purposes. In this paper, application of new probabilistic neural network features for data approximation and data classification are considered for plausibility check in temperature measurement. For this purpose, two-phase FDI mechanism was considered for residual generation and evaluation.
Abstract: An improved topology of a voltage-fed quasi-resonant
soft switching LCrCdc series-parallel half bridge inverter with a constant-frequency for electronic ballast applications is proposed in this paper. This new topology introduces a low-cost solution to
reduce switching losses and circuit rating to achieve high-efficiency
ballast. Switching losses effect on ballast efficiency is discussed
through experimental point of view. In this discussion, an improved
topology in which accomplishes soft switching operation over a wide
power regulation range is proposed. The proposed structure uses reverse recovery diode to provide better operation for the ballast system. A symmetrical pulse wide modulation (PWM) control scheme is implemented to regulate a wide range of out-put power.
Simulation results are kindly verified with the experimental
measurements obtained by ballast-lamp laboratory prototype. Different load conditions are provided in order to clarify the
performance of the proposed converter.
Abstract: Emerging Bio-engineering fields such as Brain
Computer Interfaces, neuroprothesis devices and modeling and
simulation of neural networks have led to increased research activity
in algorithms for the detection, isolation and classification of Action
Potentials (AP) from noisy data trains. Current techniques in the field
of 'unsupervised no-prior knowledge' biosignal processing include
energy operators, wavelet detection and adaptive thresholding. These
tend to bias towards larger AP waveforms, AP may be missed due to
deviations in spike shape and frequency and correlated noise
spectrums can cause false detection. Also, such algorithms tend to
suffer from large computational expense.
A new signal detection technique based upon the ideas of phasespace
diagrams and trajectories is proposed based upon the use of a
delayed copy of the AP to highlight discontinuities relative to
background noise. This idea has been used to create algorithms that
are computationally inexpensive and address the above problems.
Distinct AP have been picked out and manually classified from
real physiological data recorded from a cockroach. To facilitate
testing of the new technique, an Auto Regressive Moving Average
(ARMA) noise model has been constructed bases upon background
noise of the recordings. Along with the AP classification means this
model enables generation of realistic neuronal data sets at arbitrary
signal to noise ratio (SNR).
Abstract: In present work the problem of the ITER fusion
plasma neutron source parameter reconstruction using only the
Vertical Neutron Camera data was solved. The possibility of neutron
source parameter reconstruction was estimated by the numerical
simulations and the analysis of adequateness of mathematic model
was performed. The neutron source was specified in a parametric
form. The numerical analysis of solution stability with respect to data
distortion was done. The influence of the data errors on the
reconstructed parameters is shown:
• is reconstructed with errors less than 4% at all examined values
of δ (until 60%);
• is determined with errors less than 10% when δ do not overcome
5%;
• is reconstructed with relative error more than 10 %;
• integral intensity of the neutron source is determined with error
10% while δ error is less than 15%;
where -error of signal measurements, (R0,Z0), the plasma center
position,- /parameter of neutron source profile.
Abstract: In this paper, a fast motion compensation algorithm is
proposed that improves coding efficiency for video sequences with
brightness variations. We also propose a cross entropy measure
between histograms of two frames to detect brightness variations. The
framewise brightness variation parameters, a multiplier and an offset
field for image intensity, are estimated and compensated. Simulation
results show that the proposed method yields a higher peak signal to
noise ratio (PSNR) compared with the conventional method, with a
greatly reduced computational load, when the video scene contains
illumination changes.
Abstract: The composition, vapour pressure, and heat capacity
of nine biodiesel fuels from different sources were measured. The
vapour pressure of the biodiesel fuels is modeled assuming an ideal
liquid phase of the fatty acid methyl esters constituting the fuel. New
methodologies to calculate the vapour pressure and ideal gas and
liquid heat capacities of the biodiesel fuel constituents are proposed.
Two alternative optimization scenarios are evaluated: 1) vapour
pressure only; 2) vapour pressure constrained with liquid heat
capacity. Without physical constraints, significant errors in liquid
heat capacity predictions were found whereas the constrained
correlation accurately fit both vapour pressure and liquid heat
capacity.
Abstract: Object Relational Databases (ORDB) are complex in
nature than traditional relational databases because they combine the
characteristics of both object oriented concepts and relational
features of conventional databases. Design of an ORDB demands
efficient and quality schema considering the structural, functional
and componential traits. This internal quality of the schema is
assured by metrics that measure the relevant attributes. This is
extended to substantiate the understandability, usability and
reliability of the schema, thus assuring external quality of the
schema. This work institutes a formalization of ORDB metrics;
metric definition, evaluation methodology and the calibration of the
metric. Three ORDB schemas were used to conduct the evaluation
and the formalization of the metrics. The metrics are calibrated using
content and criteria related validity based on the measurability,
consistency and reliability of the metrics. Nominal and summative
scales are derived based on the evaluated metric values and are
standardized. Future works pertaining to ORDB metrics forms the
concluding note.
Abstract: In order to define a new model of Tunisian foot
sizes and for building the most comfortable shoes, Tunisian
industrialists must be able to offer for their customers products able
to put on and adjust the majority of the target population concerned.
Moreover, the use of models of shoes, mainly from others
country, causes a mismatch between the foot and comfort of the
Tunisian shoes.
But every foot is unique; these models become uncomfortable for
the Tunisian foot. We have a set of measures produced from a
3D scan of the feet of a diverse population (women, men ...) and we
try to analyze this data to define a model of foot specific to the
Tunisian footwear design.
In this paper we propose tow new approaches to modeling a new
foot sizes model. We used, indeed, the neural networks, and specially
the Kohonen network.
Next, we combine neural networks with the concept of half-foot
size to improve the models already found. Finally, it was necessary to
compare the results obtained by applying each approach and we
decide what-s the best approach that give us the most model of foot
improving more comfortable shoes.
Abstract: One of the main image representations in Mathematical Morphology is the 3D Shape Decomposition Representation, useful for Image Compression and Representation,and Pattern Recognition. The 3D Morphological Shape Decomposition representation can be generalized a number of times,to extend the scope of its algebraic characteristics as much as possible. With these generalizations, the Morphological Shape Decomposition 's role to serve as an efficient image decomposition tool is extended to grayscale images.This work follows the above line, and further develops it. Anew evolutionary branch is added to the 3D Morphological Shape Decomposition's development, by the introduction of a 3D Multi Structuring Element Morphological Shape Decomposition, which permits 3D Morphological Shape Decomposition of 3D binary images (grayscale images) into "multiparameter" families of elements. At the beginning, 3D Morphological Shape Decomposition representations are based only on "1 parameter" families of elements for image decomposition.This paper addresses the gray scale inter frame interpolation by means of mathematical morphology. The new interframe interpolation method is based on generalized morphological 3D Shape Decomposition. This article will present the theoretical background of the morphological interframe interpolation, deduce the new representation and show some application examples.Computer simulations could illustrate results.
Abstract: The paper presents an on-line recognition machine
(RM) for continuous/isolated, dynamic and static gestures that arise
in Flight Deck Officer (FDO) training. RM is based on generic pattern
recognition framework. Gestures are represented as templates using
summary statistics. The proposed recognition algorithm exploits temporal
and spatial characteristics of gestures via dynamic programming
and Markovian process. The algorithm predicts corresponding index
of incremental input data in the templates in an on-line mode.
Accumulated consistency in the sequence of prediction provides a
similarity measurement (Score) between input data and the templates.
The algorithm provides an intuitive mechanism for automatic detection
of start/end frames of continuous gestures. In the present paper,
we consider isolated gestures. The performance of RM is evaluated
using four datasets - artificial (W TTest), hand motion (Yang) and
FDO (tracker, vision-based ). RM achieves comparable results which
are in agreement with other on-line and off-line algorithms such as
hidden Markov model (HMM) and dynamic time warping (DTW).
The proposed algorithm has the additional advantage of providing
timely feedback for training purposes.
Abstract: The people are differed by their capabilities, skills and mental agilities. The evolution of human from childhood when they are completely dependent up to adultness the time they gradually set the dependency free is too complicated, by considering they have all started from almost one point but some become cleverer and some less. The main control command of a cybernetic hand should be posted by remaining healthy organs of disabled Person. These commands can be from several channels, which their recording and detecting are different and need complicated study. In this research, we suppose that, this stage has been done or in the other words, the command has been already sent and detected. So the main goal is to control a long hand, upper elbow hand missing, by an interest angle define by disabled. It means that, the system input is the position desired by disables and the output is the elbow-joint angle variation. Therefore the goal is a suitable control design based on neural network theory in order to meet the given mapping.
Abstract: In this paper, we were introduces a skin detection
method using a histogram approximation based on the mean shift
algorithm. The proposed method applies the mean shift procedure to a
histogram of a skin map of the input image, generated by comparison
with standard skin colors in the CbCr color space, and divides the
background from the skin region by selecting the maximum value
according to brightness level. The proposed method detects the skin
region using the mean shift procedure to determine a maximum value
that becomes the dividing point, rather than using a manually selected
threshold value, as in existing techniques. Even when skin color is
contaminated by illumination, the procedure can accurately segment
the skin region and the background region. The proposed method may
be useful in detecting facial regions as a pretreatment for face
recognition in various types of illumination.
Abstract: Accurate assessment of the primary tumor response to
treatment is important in the management of breast cancer. This
paper introduces a new set of treatment evaluation indicators for
breast cancer cases based on the computational process of three
known metrics, the Euclidian, Hamming and Levenshtein distances.
The distance principals are applied to pairs of mammograms and/or
echograms, recorded before and after treatment, determining a
reference point in judging the evolution amount of the studied
carcinoma. The obtained numerical results are indeed very
transparent and indicate not only the evolution or the involution of
the tumor under treatment, but also a quantitative measurement of the
benefit in using the selected method of treatment.
Abstract: Future astronomical projects on large space x-ray
imaging telescopes require novel substrates and technologies for the
construction of their reflecting mirrors. The mirrors must be
lightweight and precisely shaped to achieve large collecting area with
high angular resolution. The new materials and technologies must be
cost-effective. Currently, the most promising materials are glass or
silicon foils. We focused on precise shaping these foils by thermal
forming process. We studied free and forced slumping in the
temperature region of hot plastic deformation and compared the
shapes obtained by the different slumping processes. We measured
the shapes and the surface quality of the foils. In the experiments, we
varied both heat-treatment temperature and time following our
experiment design. The obtained data and relations we can use for
modeling and optimizing the thermal forming procedure.