Abstract: In this study, breeding biology and induced breeding
of freshwater mud eel, Monopterus cuchia was observed during the
experimental period from February to June, 2013. Breeding biology
of freshwater mud eel, Monopterus cuchia was considered in terms of
gonadosomatic index, length-weight relationship of gonad, ova
diameter and fecundity. The ova diameter was recorded from 0.3 mm
to 4.30 mm and the individual fecundity was recorded from 155 to
1495 while relative fecundity was found from 2.64 to 12.45. The
fecundity related to body weight and length of fish was also
discussed. A peak of GSI was observed 2.14±0.2 in male and 5.1
±1.09 in female. Induced breeding of freshwater mud eel,
Monopterus cuchia was also practiced with different doses of
different inducing agents like pituitary gland (PG), human chorionic
gonadotropin (HCG), Gonadotropin releasing hormone (GnRH) and
Ovuline-a synthetic hormone in different environmental conditions.
However, it was observed that the artificial breeding of freshwater
mud eel, Monopterus cuchia was not yet succeeded through inducing
agents in captive conditions, rather the inducing agent showed
negative impacts on fecundity and ovarian tissues. It was seen that
mature eggs in the oviduct were reduced, absorbed and some eggs
were found in spoiled condition.
Abstract: The paper is focused on monitoring of dependencies
of different composition concretes on elastic modulus values.
To obtain a summary of elastic modulus development in dependence
of concrete composition design variability was the objective
of the experiment. Essential part of this work was initiated
as a reaction to building practice when questions of elastic moduli
arose at the same time and which mostly did not obtain the required
and expected values from concrete constructions.
Abstract: Due to today’s globalization as well as outsourcing
practices of the companies, the Supply Chain (SC) performances
have become more dependent on the efficient movement of material
among places that are geographically dispersed, where there is more
chance for disruptions. One such disruption is the quality and
delivery uncertainties of outsourcing. These uncertainties could lead
the products to be unsafe and, as is the case in a number of recent
examples, companies may have to end up in recalling their products.
As a result of these problems, there is a need to develop a
methodology for selecting suppliers globally in view of risks
associated with low quality and late delivery. Accordingly, we
developed a two-stage stochastic model that captures the risks
associated with uncertainty in quality and delivery as well as a
solution procedure for the model. The stochastic model developed
simultaneously optimizes supplier selection and purchase quantities
under price discounts over a time horizon. In particular, our target is
the study of global organizations with multiple sites and multiple
overseas suppliers, where the pricing is offered in suppliers’ local
currencies. Our proposed methodology is applied to a case study for a
US automotive company having two assembly plants and four
potential global suppliers to illustrate how the proposed model works
in practice.
Abstract: This paper presents an application of a “Systematic
Soft Domain Driven Design Framework” as a soft systems approach
to domain-driven design of information systems development. The
framework use SSM as a guiding methodology within which we have
embedded a sequence of design tasks based on the UML leading to
the implementation of a software system using the Naked Objects
framework. This framework have been used in action research
projects that have involved the investigation and modelling of
business processes using object-oriented domain models and the
implementation of software systems based on those domain models.
Within this framework, Soft Systems Methodology (SSM) is used as
a guiding methodology to explore the problem situation and to
develop the domain model using UML for the given business
domain. The framework is proposed and evaluated in our previous
works, and a real case study “Information Retrieval System for
academic research” is used, in this paper, to show further practice and
evaluation of the framework in different business domain. We argue
that there are advantages from combining and using techniques from
different methodologies in this way for business domain modelling.
The framework is overviewed and justified as multimethodology
using Mingers multimethodology ideas.
Abstract: Given the limited research on Small and Mediumsized
Enterprises’ (SMEs) contribution to Corporate Social
Responsibility (CSR) and even scarcer research on Swiss SMEs, this
paper helps to fill these gaps by enabling the identification of supranational
SME parameters. Thus, the paper investigates the current
state of SME practices in Switzerland and across 15 other countries.
Combining the degree to which SMEs demonstrate an explicit (or
business case) approach or see CSR as an implicit moral activity with
the assessment of their attributes for “variety of capitalism” defines
the framework of this comparative analysis. To outline Swiss small
business CSR patterns in particular, 40 SME owner-managers were
interviewed. A secondary data analysis of studies from different
countries laid groundwork for this comparative overview of small
business CSR. The paper identifies Swiss small business CSR as
driven by norms, values, and by the aspiration to contribute to
society, thus, as an implicit part of the day-to-day business. Similar to
most Central European, Mediterranean, Nordic, and Asian countries,
explicit CSR is still very rare in Swiss SMEs. Astonishingly, also
British and American SMEs follow this pattern in spite of their strong
and distinctly liberal market economies. Though other findings show
that nationality matters this research concludes that SME culture and
an informal CSR agenda are strongly formative and superseding even
forces of market economies, nationally cultural patterns, and
language. Hence, classifications of countries by their market system,
as found in the comparative capitalism literature, do not match the
CSR practices in SMEs as they do not mirror the peculiarities of their
business. This raises questions on the universality and
generalisability of unmediated, explicit management concepts,
especially in the context of small firms.
Abstract: Academicians at the Arab Open University have
always voiced their concern about the efficacy of the blended
learning process. Based on 75% independent study and 25% face-toface
tutorial, it poses the challenge of the predisposition to
adjustment. Being used to the psychology of traditional educational
systems, AOU students cannot be easily weaned from being spoonfed.
Hence they lack the motivation to plunge into self-study. For
better involvement of AOU students into the learning practices, it is
imperative to diagnose the factors that impede or increase their
motivation. This is conducted through an empirical study grounded
upon observations and tested hypothesis and aimed at monitoring and
optimizing the students’ learning outcome. Recommendations of the
research will follow the findings.
Abstract: Model transformation, as a pivotal aspect of Modeldriven
engineering, attracts more and more attentions both from
researchers and practitioners. Many domains (enterprise engineering,
software engineering, knowledge engineering, etc.) use model
transformation principles and practices to serve to their domain
specific problems; furthermore, model transformation could also be
used to fulfill the gap between different domains: by sharing and
exchanging knowledge. Since model transformation has been widely
used, there comes new requirement on it: effectively and efficiently
define the transformation process and reduce manual effort that
involved in. This paper presents an automatic model transformation
methodology based on semantic and syntactic comparisons, and
focuses particularly on granularity issue that existed in transformation
process. Comparing to the traditional model transformation
methodologies, this methodology serves to a general purpose: crossdomain
methodology. Semantic and syntactic checking
measurements are combined into a refined transformation process,
which solves the granularity issue. Moreover, semantic and syntactic
comparisons are supported by software tool; manual effort is replaced
in this way.
Abstract: As technology-based service industries grow
drastically worldwide; companies are recognizing the importance of
market preoccupancy and have made an effort to capture a large
market to gain the upper hand. To this end, a focus on patents can be
used to determine the properties of a technology, as well as to capture
advantages in technical skills, in comparison with the firm’s
competitors. However, technology-based services largely depend not
only on their technological value but also their economic value, due
to the recognized worth that is passed to a plurality of users. Thus, it
is important to determine whether there are any competitors in the
target areas and what services they provide in any field. Despite this
importance, little effort has been made to systematically benchmark
competitors in order to identify business opportunities. Thus, this
study aims to not only identify each position of technology-centered
service companies in complex market dynamics, but also to discover
new business opportunities. For this, we try to consider both
technology and market environments simultaneously by utilizing
patent data as a representative proxy for technology and trademark
dates as an index for a firm’s target goods and services. Theoretically,
this is one of the earliest attempts to combine patent data and
trademark data to analyze corporate strategies. In practice, the
research results are expected to be used as a decision criterion to
diagnose the economic value that companies can obtain by entering
the market, as well as the technological value to be passed onto their
customers. Thus, the proposed approach can be useful to support
effective technology and business strategies in a firm.
Abstract: The venture capital becomes more and more advanced
and effective source of the innovation project financing, connected
with a high-risk level. In the developed countries, it plays a key role
in transforming innovation projects into successful businesses and
creating the prosperity of the modern economy. In Russia, there are
many necessary preconditions for creation of the effective venture
investment system: the network of the public institutes for innovation
financing operates; there is a significant number of the small and
medium-sized enterprises, capable to sell production with good
market potential. However, the current system does not confirm the
necessary level of efficiency in practice that can be substantially
explained by the absence of the accurate plan of action to form the
national venture model and by the lack of experience of successful
venture deals with profitable exits in Russian economy. This paper
studies the influence of various factors on the venture industry
development by the example of the IT-sector in Russia. The choice of
the sector is based on the fact, that this segment is the main driver of
the venture capital market growth in Russia, and the necessary set of
data exists. The size of investment of the second round is used as the
dependent variable. To analyse the influence of the previous round,
such determinant as the volume of the previous (first) round
investments is used. There is also used a dummy variable in
regression to examine that the participation of an investor with high
reputation and experience in the previous round can influence the size
of the next investment round. The regression analysis of short-term
interrelations between studied variables reveals prevailing influence
of the volume of the first round investments on the venture
investments volume of the second round. The most important
determinant of the value of the second-round investment is the value
of first–round investment, so it means that the most competitive on
the Russian market are the start-up teams that can attract more money
on the start, and the target market growth is not the factor of crucial
importance. This supports the point of view that VC in Russia is
driven by endogenous factors and not by exogenous ones that are
based on global market growth.
Abstract: Metal thin-walled members have been widely used in
building industry. Usually they are utilized as purlins, girts or ceiling
beams. Due to slenderness of thin-walled cross-sections these
structural members are prone to stability problems (e.g. flexural
buckling, lateral torsional buckling). If buckling is not
constructionally prevented their resistance is limited by buckling
strength. In practice planar members of roof or wall cladding can be
attached to thin-walled members. These elements reduce
displacement of thin-walled members and therefore increase their
buckling strength. If this effect is taken into static assessment more
economical sections of thin-walled members might be utilized and
certain savings of material might be achieved. This paper focuses on
problem of determination of critical load of steel thin-walled beams
with lateral continuous restraint which is crucial for lateral torsional
buckling assessment.
Abstract: Paranoid ideation is a common thought process that
constitutes a defense against perceived social threats. The current
study aimed at the characterization of paranoid ideation in youths and
to explore the possible predictors involved in the development of
paranoid ideations. Paranoid ideation, shame, submission, early
childhood memories and current depressive, anxious and stress
symptomatology were assessed in a sample of 1516 Portuguese
youths. Higher frequencies of paranoid ideation were observed,
particularly in females and youths from lower socioeconomic status.
The main predictors identified relates to submissive behaviors and
adverse childhood experiences, and especially to shame feelings. The
current study emphasizes that the these predictors are similar to
findings in adults and clinical populations, and future implications to
research and clinical practice aiming at paranoid ideations are
discussed, as well as the pertinence of the study of mediating factors
that allow a wider understanding of this thought process in younger
populations and the prevention of psychopathology in adulthood.
Abstract: The substantial development of the construction
industry has forced the cement industry, its major support, to focus
on achieving maximum productivity to meet the growing demand for
this material. This means that the reliability of a cement production
system needs to be at the highest level that can be achieved by good
maintenance. This paper studies the extent to which the
implementation of RCM is needed as a strategy for increasing the
reliability of the production systems component can be increased,
thus ensuring continuous productivity. In a case study of four Libyan
cement factories, 80 employees were surveyed and 12 top and middle
managers interviewed. It is evident that these factories usually
breakdown more often than once per month which has led to a
decline in productivity. In many times they cannot achieve the
minimum level of production amount. This has resulted from the
poor reliability of their production systems as a result of poor or
insufficient maintenance. It has been found that most of the factories’
employees misunderstand maintenance and its importance. The main
cause of this problem is the lack of qualified and trained staff, but in
addition it has been found that most employees are not found to be
motivated as a result of a lack of management support and interest. In
response to these findings, it has been suggested that the RCM
strategy should be implemented in the four factories. The results
show the importance of the development of maintenance strategies
through the implementation of RCM in these factories. The purpose
of it would be to overcome the problems that could secure the
reliability of the production systems. This study could be a useful
source of information for academic researchers and the industrial
organizations which are still experiencing problems in maintenance
practices.
Abstract: This article is to introduce the meaning and form of
social quality moving process as indicated by members of two suburb
communities with different social and cultural contexts. The form of
social quality moving process is very significant for the community
and social development, because it will make the people living
together with sustainable happiness.
This is a qualitative study involving 30 key-informants from two
suburb communities. Data were collected though key-informant
interviews, and analyzed using logical content description and
descriptive statistics.
This research found that on the social quality component, the
people in both communities stressed the procedure for social qualitymaking.
This includes the generousness, sharing and assisting among
people in the communities. These practices helped making people to
live together with sustainable happiness. Living as a family or appear
to be a family is the major social characteristic of these two
communities.
This research also found that form of social quality’s moving
process of both communities stress relation of human and nature;
“nature overpower humans” paradigm and influence of religious
doctrine that emphasizes relations among humans. Both criteria make
the form of social’s moving process simple, adaptive to nature and
caring for opinion sharing and understanding among each other
before action. This form of social quality’s moving process is
composed of 4 steps; (1) awareness building, (2) motivation to
change, (3) participation from every party which is concerned (4)
self-reliance.
Abstract: In this paper, a summary of analytical and
experimental studies into the behavior of a new hysteretic damper,
designed for seismic protection of structures is presented. The Multidirectional
Torsional Hysteretic Damper (MRSD) is a patented
invention in which a symmetrical arrangement of identical cylindrical
steel cores is so configured as to yield in torsion while the structure
experiences planar movements due to earthquake shakings. The new
device has certain desirable properties. Notably, it is characterized by
a variable and controllable-via-design post-elastic stiffness. The
mentioned property is a result of MRSD’s kinematic configuration
which produces this geometric hardening, rather than being a
secondary large-displacement effect. Additionally, the new system is
capable of reaching high force and displacement capacities, shows
high levels of damping, and very stable cyclic response. The device
has gone through many stages of design refinement, multiple
prototype verification tests and development of design guide-lines
and computer codes to facilitate its implementation in practice.
Practicality of the new device, as offspring of an academic sphere, is
assured through extensive collaboration with industry in its final
design stages, prototyping and verification test programs.
Abstract: Rapid growth of Information Technologies (IT) has
had huge influence on enterprises, and it has contributed to its
promotion and increasingly extensive use in enterprises. Information
Technologies have to a large extent determined the processes taking
place in an enterprise; what is more, IT development has brought the
need to adopt a brand new approach to human resources management
in an enterprise. The use of IT in human resource management
(HRM) is of high importance due to the growing role of information
and information technologies. The aim of this paper is to evaluate the
use of information technologies in human resources management in
enterprises. These practices will be presented in the following areas:
recruitment and selection, development and training, employee
assessment, motivation, talent management, personnel service.
Results of conducted survey show diversity of solutions applied in
particular areas of human resource management. In the future, further
development in this area should be expected, as well as integration of
individual HRM areas, growing mobile-enabled HR processes and
their transfer into the cloud. Presented IT solutions applied in HRM
are highly innovative, which is of great significance due to their
possible implementation in other enterprises.
Abstract: The Speexx results revealed four main factors
affecting the success of 190 Thai sophomores as follows: 1) Future
English training should be pursued in applied Speexx development.
2) Thai students didn’t see the benefit of having an Online Language
Training Program. 3) There is a great need to educate the next
generation of learners on the benefits of Speexx within the
community. 4) A great majority of Thai Sophomores didn't know
what Speexx was.
A guideline for self-reliance planning consisted of four aspects: 1)
Development planning: by arranging groups to further improve
English abilities with the Speexx Language Training program and
encourage using Speexx into every day practice. Local communities
need to develop awareness of the usefulness of Speexx and share the
value of using the program among family and friends. 2) Humanities
and Social Science staff should develop skills using this Online
Language Training Program to expand on the benefits of Speexx
within their departments. 3) Further research should be pursued on
the Thai Students progression with Speexx and how it helps them
improve their language skills with Business English. 4) University’s
and Language centers should focus on using Speexx to encourage
learning for any language, not just English.
Abstract: In educational technology, the idea of innovation is
usually tethered to contemporary technological inventions and
emerging technologies. Yet, using long-known technologies in ways
that are pedagogically or experimentially new can reposition them as
emerging educational technologies. In this study we explore how a
subtle pivot in pedagogical thinking led to an innovative education
technology. We describe the design and implementation of an online
writing tool that scaffolds students in the evaluation of their own
informational texts. We think about how pathways to innovation can
emerge from pivots, namely a leveraging of longstanding practices in
novel ways has the potential to cultivate new opportunities for
learning. We first unpack Infowriter in terms of its design, then we
describe some results of a study in which we implemented an
intervention which included our designed application.
Abstract: While emerging technologies continue to emerge,
research into their use in learning contexts often focuses on a subset
of educational practices and ways of using technologies. In this study
we begin to explore the extent to which educational designs are
influenced by larger societal and education-related factors not usually
explicitly considered when designing or identifying technology-supported
education experiences for research study. We examine
patterns within and between factors via a content analysis across ten
years and 19 different journals of published peer-reviewed research
on technology-supported writing. Our findings have implications for
how researchers, designers, and educators approach technology-supported
educational design within and beyond the field of writing
and literacy.
Abstract: Mass media campaigns against obesity are often
designed to impact large audiences. This usually means that their
audience is defined based on general demographic characteristics like
age, gender, occupation etc., not taking into account psychographics
like behavior, motivations, wants, etc. Using psychographics, as the
base for the audience segmentation, is a common practice in case of
successful campaigns, as it allows developing more relevant
messages. It also serves a purpose of identifying key segments, those
that generate the best return on investment. For a health campaign,
that would be segments that have the best chance of being converted
into healthy lifestyle at the lowest cost. This paper presents the
limitations of the demographic targeting, based on the findings from
the reception study of IMSS (Mexican Social Security Institute) antiobesity
TV commercials and proposes mothers as the first level of
segmentation, in the process of identifying the key segment for these
campaigns.
Abstract: Channel sections are widely used in practice as beams.
However, design rules for eccentrically loaded (not through shear
center) beams with channel cross- sections are not available in
Eurocode 3. This paper compares the ultimate loads based on the
adjusted design rules for lateral torsional buckling of eccentrically
loaded channel beams in bending to the ultimate loads obtained with
Finite Element (FE) simulations on the basis of a parameter study.
Based on the proposed design rule, this study has led to a new design
rule which conforms to Eurocode 3.