Abstract: The increasing divorce and fertility rates outside of marriage, the changing values in the last decades have led to a high prevalence of single parent families. Currently, worldwide, singleparent families represent about a quarter of all families. Recent changes occurring in the structure of single-parent families and also the multitude of factors that influence the quality of life of these families require the development of new research tools in order to provide foundations for social policies addressed to this type of family. The purpose of this paper is to present an analysis concerning the quality of life for single parent families in Romania, based on data collected through a research methodology developed by the authors within a scientific research project funded by a national grant called Partnerships in priority areas.
Abstract: The scroll pump belongs to the category of positive
displacement pump can be used for continuous pumping of gases at
low pressure apart from general vacuum application. The shape of
volume occupied by the gas moves and deforms continuously as the
spiral orbits. To capture flow features in such domain where mesh
deformation varies with time in a complicated manner, mesh less
solver was found to be very useful. Least Squares Kinetic Upwind
Method (LSKUM) is a kinetic theory based mesh free Euler solver
working on arbitrary distribution of points. Here upwind is enforced
in molecular level based on kinetic flux vector splitting scheme
(KFVS). In the present study we extended the LSKUM to moving
node viscous flow application. This new code LSKUM-NS-MN for
moving node viscous flow is validated for standard airfoil pitching
test case. Simulation performed for flow through scroll pump using
LSKUM-NS-MN code agrees well with the experimental pumping
speed data.
Abstract: Let G be a finite group, and let F be a formation of
finite group. We say that a subgroup H of G is p F -normal in G if
there exists a normal subgroup T of G such that HT is a permutable
Hall subgroup of G and G G (H
Abstract: A procedural-animation-based approach which rapidly
synthesize the adaptive locomotion for quadruped characters that they
can walk or run in any directions on an uneven terrain within a
dynamic environment was proposed. We devise practical motion
models of the quadruped animals for adapting to a varied terrain in a
real-time manner. While synthesizing locomotion, we choose the
corresponding motion models by means of the footstep prediction of
the current state in the dynamic environment, adjust the key-frames of
the motion models relying on the terrain-s attributes, calculate the
collision-free legs- trajectories, and interpolate the key-frames
according to the legs- trajectories. Finally, we apply dynamic time
warping to each part of motion for seamlessly concatenating all desired
transition motions to complete the whole locomotion. We reduce the
time cost of producing the locomotion and takes virtual characters to
fit in with dynamic environments no matter when the environments are
changed by users.
Abstract: Modeling the behavior of the dialogue management in
the design of a spoken dialogue system using statistical methodologies
is currently a growing research area. This paper presents a work
on developing an adaptive learning approach to optimize dialogue
strategy. At the core of our system is a method formalizing dialogue
management as a sequential decision making under uncertainty whose
underlying probabilistic structure has a Markov Chain. Researchers
have mostly focused on model-free algorithms for automating the
design of dialogue management using machine learning techniques
such as reinforcement learning. But in model-free algorithms there
exist a dilemma in engaging the type of exploration versus exploitation.
Hence we present a model-based online policy learning
algorithm using interconnected learning automata for optimizing
dialogue strategy. The proposed algorithm is capable of deriving
an optimal policy that prescribes what action should be taken in
various states of conversation so as to maximize the expected total
reward to attain the goal and incorporates good exploration and
exploitation in its updates to improve the naturalness of humancomputer
interaction. We test the proposed approach using the most
sophisticated evaluation framework PARADISE for accessing to the
railway information system.
Abstract: On existing online shopping on the web, SSL and
password are usually used to achieve the secure trades. SSL shields
communication from the third party who is not related with the trade,
and indicates that the trader's web site is authenticated by one of the
certification authority. Password certifies a customer as the same
person who has visited the trader's web site before, and protects the
customer's privacy such as what the customer has bought on the site.
However, there is no forensics for the trades in those cased above.
With existing methods, no one can prove what is ordered by
customers, how many products are ordered and even whether
customers have ordered or not. The reason is that the third party has to
guess what were traded with logs that are held by traders and by
customers. The logs can easily be created, deleted and forged since
they are electronically stored. To enhance security with digital
forensics for electronic commerce on the web, I indicate a secure
method with cellular phones.
Abstract: It-s difficult for China-s current land transfer
institutions limited to county-wide to solve the contradiction between
urban-rural development and construction land shortage. On the basis of analyzing China-s construction land transfer system, and evaluation
toward Transfer of development rights (TDR) practices in Anhui and
Chongqing, the passage proposes: (1) we should establish a multi-level
land indicators trade market under the guidance of regional spatial
objectives, and allow land transfer paid across cities and counties
within a specific area following the regulation of both government and
market; (2) it would be better to combine organically the policy ntentions of land plan, regional plan, urban plan and economic plan, and link them with land indicators transfer to promote a wider range of
urban-rural balance and regional coordination.
Abstract: (Bi0.5Na0.5)TiO3 doped with 8 mol % BaTiO3 powder
(BNT-BT0.08), prepared by sol-gel method was compacted and
sintered by Spark Plasma Sintering (SPS) process. The influence of
SPS temperature on the densification of BNT-BT0.08 ceramic was
investigated. Starting from sol-gel nanopowder of BNT-BT
containing 8 mol % BaTiO3 with an average particles size of about
30 nm, were obtained ceramics with density around 98 % of the
theoretical density value when the SPS temperature used was about
850 °C. The average grain size of the resulting ceramics was 80 nm.
The BNT-BT0.08 ceramic sample obtained by SPS method has shown
good electric properties at various frequencies.
Abstract: The physiological effects of physical exercise on
human body are relatively well known in literature, which describes
in detail the changes that occur in the cardiovascular system, the
respiratory one, in bones and other systems, both during exercise
and after its delivery. However, the effects of exercise on mental
processes are less treated. From the literature reviews discussed in
this study, it can be detached the idea that we can not exactly say that
physical exercise has beneficial effects on mental processes, but
neither that it would have potentially negative effects. This
uncertainty, reflected in the inability to indicate precise and
unequivocal meaning, favorable-unfavorable physical effort in acting
on mental processes, is a prime reason to undertake a study of the
phenomenon influence effort administered physical education classes
on the dynamics of mental processes like attention and memory.
Abstract: Both image steganography and image encryption have
advantages and disadvantages. Steganograhy allows us to hide a
desired image containing confidential information in a covered or
host image while image encryption is decomposing the desired image
to a non-readable, non-comprehended manner. The encryption
methods are usually much more robust than the steganographic ones.
However, they have a high visibility and would provoke the attackers
easily since it usually is obvious from an encrypted image that
something is hidden! The combination of steganography and
encryption will cover both of their weaknesses and therefore, it
increases the security. In this paper an image encryption method
based on sinc-convolution along with using an encryption key of 128
bit length is introduced. Then, the encrypted image is covered by a
host image using a modified version of JSteg steganography
algorithm. This method could be applied to almost all image formats
including TIF, BMP, GIF and JPEG. The experiment results show
that our method is able to hide a desired image with high security and
low visibility.
Abstract: The increasing importance of FlexRay systems in
automotive domain inspires unceasingly relative researches. One
primary issue among researches is to verify the reliability of FlexRay
systems either from protocol aspect or from system design aspect.
However, research rarely discusses the effect of network topology on
the system reliability. In this paper, we will illustrate how to model
the reliability of FlexRay systems with various network topologies by
a well-known probabilistic reasoning technology, Bayesian Network.
In this illustration, we especially investigate the effectiveness of error
containment built in star topology and fault-tolerant midpoint
synchronization algorithm adopted in FlexRay communication
protocol. Through a FlexRay steer-by-wire case study, the influence
of different topologies on the failure probability of the FlexRay steerby-
wire system is demonstrated. The notable value of this research is
to show that the Bayesian Network inference is a powerful and
feasible method for the reliability assessment of FlexRay systems.
Abstract: The InAlGaN alloy has only recently began receiving
serious attention into its growth and application. High quality InGaN
films have led to the development of light emitting diodes (LEDs) and
blue laser diodes (LDs). The quaternary InAlGaN however, represents
a more versatile material since the bandgap and lattice constant can be
independently varied. We report an ultraviolet (UV) quaternary
InAlGaN multi-quantum wells (MQWs) LD study by using the
simulation program of Integrated System Engineering (ISE TCAD).
Advanced physical models of semiconductor properties were used in
order to obtain an optimized structure. The device performance which
is affected by piezoelectric and thermal effects was studied via
drift-diffusion model for carrier transport, optical gain and loss. The
optical performance of the UV LD with different numbers of quantum
wells was numerically investigated. The main peak of the emission
wavelength for double quantum wells (DQWs) was shifted from 358
to 355.8 nm when the forward current was increased. Preliminary
simulated results indicated that better output performance and lower
threshold current could be obtained when the quantum number is four,
with output power of 130 mW and threshold current of 140 mA.
Abstract: In this work, axisymetric CFD simulation of fixed bed
GTL reactor has been conducted, using computational fluid dynamics
(CFD). In fixed bed CFD modeling, when N (tube-to-particle
diameter ratio) has a large value, it is common to consider the packed
bed as a porous media. Synthesis gas (a mixture of predominantly
carbon monoxide and hydrogen) was fed to the reactor. The reactor
length was 20 cm, divided to three sections. The porous zone was in
the middle section of the reactor. The model equations were solved
employing finite volume method. The effects of particle diameter,
bed voidage, fluid velocity and bed length on pressure drop have
been investigated. Simulation results showed these parameters could
have remarkable impacts on the reactor pressure drop.
Abstract: The purpose of this paper is to explore the role of
cognitive decision effort in recommendation system, combined with
indicators "information quality" and "service quality" from IS success
model to exam the awareness of the user for the "recommended system
performance". A total of 411 internet user answered a questionnaire
assessing their attention of use and satisfaction of recommendation
system in internet book store. Quantitative result indicates following
research results. First, information quality of recommended system
has obvious influence in consumer shopping decision-making process,
and the attitude to use the system. Second, in the process of consumer's
shopping decision-making, the recommendation system has no
significant influence for consumers to pay lower cognitive
decision-making effort. Third, e-commerce platform provides
recommendations and information is necessary, but the quality of
information on user needs must be considered, or they will be other
competitors offer homogeneous services replaced.
Abstract: The consumption capability of people in China has
been a big issue to tourism business. Due to the increasing of China
tourists, Taiwan-s government rescinded the category of people in
China and opened up the non-stopped airline from China to Taiwan.
The “one-day traveling style between China and Taiwan" has formed,
hoping to bring business to Taiwan. Night market, which shows
foreigners the very local character of Taiwan, contains various
merchandise for consumers to purchase. With the increasing numbers
of non-stopped airline, visiting Taiwan-s night markets has also been
one of major activities to China-s tourists. The purpose of the present
study is to understand the consumer behavior of China tourists in
tourist night markets in Taipei and analyze that if their shopping
motives cause the different shopping behaviors and post-purchase
satisfaction and revisiting intention. The results reveled that for the
China tourists, the motives of significant influence to the shopping
behaviors. Also, the shopping behaviors significant influence to the
whole satisfaction and the whole satisfaction significant influence to
post-purchase behavior.
Abstract: This work attempts to improve the permselectivity of poly-ortho-phenylenediamine (PPD) coating for glutamate biosensor applications on Pt microelectrode, using constant potential amperometry and cyclic voltammetry. Percentage permeability of the modified PPD microelectrode was carried out towards hydrogen peroxide (H2O2) and ascorbic acid (AA) whereas permselectivity represents the percentage interference by AA in H2O2 detection. The 50-μm diameter Pt disk microelectrode showed a good permeability value toward H2O2 (95%) and selectivity against AA (0.01%) compared to other sizes of electrode studied here. The electrode was further modified with glutamate oxidase (GluOx) that was immobilized and cross linked with glutaraldehyde (GA, 0.125%), resulting in Pt/PPD/GluOx-GA electrode design. The maximum current density Jmax and apparent Michaelis constant, KM, obtained on Pt/PPD/GluOx-GA electrodes were 48 μA cm-2 and 50 μM, respectively. The linear region slope (LRS) was 0.96 μA cm-2 mM-1. The detection limit (LOD) for glutamate was 3.0 ± 0.6 μM. This study shows a promising glutamate microbiosensor for brain glutamate detection.
Abstract: This paper investigates the problem of absolute stability and robust stability of a class of Lur-e systems with neutral type and time-varying delays. By using Lyapunov direct method and linear matrix inequality technique, new delay-dependent stability criteria are obtained and formulated in terms of linear matrix inequalities (LMIs) which are easy to check the stability of the considered systems. To obtain less conservative stability conditions, an operator is defined to construct the Lyapunov functional. Also, the free weighting matrices approach combining a matrix inequality technique is used to reduce the entailed conservativeness. Numerical examples are given to indicate significant improvements over some existing results.
Abstract: In the forming of ceramic materials the plasticity
concept is commonly used. This term is related to a particular
mechanical behavior when clay is mixed with water. A plastic
ceramic material shows a permanent strain without rupture
when a compressive load produces a shear stress that exceeds
the material-s yield strength. For a plastic ceramic body it
observes a measurable elastic behavior before the yield
strength and when the applied load is removed. In this work, a
mathematical model was developed from applied concepts of
the plasticity theory by using the stress/strain diagram under
compression.
Abstract: Software development is moving towards agility with use cases and scenarios being used for requirements stories. Estimates of software costs are becoming even more important than before as effects of delays is much larger in successive short releases context of agile development. Thus, this paper reports on the development of new linear use case based software cost estimation model applicable in the very early stages of software development being based on simple metric. Evaluation showed that accuracy of estimates varies between 43% and 55% of actual effort of historical test projects. These results outperformed those of wellknown models when applied in the same context. Further work is being carried out to improve the performance of the proposed model when considering the effect of non-functional requirements.
Abstract: In this study, a network quality of service (QoS)
evaluation system was proposed. The system used a combination of
fuzzy C-means (FCM) and regression model to analyse and assess the
QoS in a simulated network. Network QoS parameters of multimedia
applications were intelligently analysed by FCM clustering
algorithm. The QoS parameters for each FCM cluster centre were
then inputted to a regression model in order to quantify the overall
QoS. The proposed QoS evaluation system provided valuable
information about the network-s QoS patterns and based on this
information, the overall network-s QoS was effectively quantified.