Abstract: This paper describes a method of signal process applied
on an end effects of Hilbert-Huang transform (HHT) to provide an
improvement in the reality of spectrum. The method is based on
back-propagation network (BPN). To improve the effect, the end
extension of the original signal is obtained by back-propagation
network. A full waveform including origin and its extension is
decomposed by using empirical mode decomposition (EMD) to obtain
intrinsic mode functions (IMFs) of the waveform. Then, the Hilbert
transform (HT) is applied to the IMFs to obtain the Hilbert spectrum of
the waveform. As a result, the method is superiority of the processing
of end effect of HHT to obtain the real frequency spectrum of signals.
Abstract: Crypto System Identification is one of the challenging tasks in Crypt analysis. The paper discusses the possibility of employing Neural Networks for identification of Cipher Systems from cipher texts. Cascade Correlation Neural Network and Back Propagation Network have been employed for identification of Cipher Systems. Very large collection of cipher texts were generated using a Block Cipher (Enhanced RC6) and a Stream Cipher (SEAL). Promising results were obtained in terms of accuracy using both the Neural Network models but it was observed that the Cascade Correlation Neural Network Model performed better compared to Back Propagation Network.
Abstract: In this paper, we investigate the problem of the existence, uniqueness and global asymptotic stability of the equilibrium point for a class of neural networks, the neutral system has mixed time delays and parameter uncertainties. Under the assumption that the activation functions are globally Lipschitz continuous, we drive a new criterion for the robust stability of a class of neural networks with time delays by utilizing the Lyapunov stability theorems and the Homomorphic mapping theorem. Numerical examples are given to illustrate the effectiveness and the advantage of the proposed main results.
Abstract: The various applications of VLSI circuits in highperformance
computing, telecommunications, and consumer
electronics has been expanding progressively, and at a very hasty
pace. This paper describes a new model for partitioning a circuit
using DBSCAN and fuzzy ARTMAP neural network. The first step
is concerned with feature extraction, where we had make use
DBSCAN algorithm. The second step is the classification and is
composed of a fuzzy ARTMAP neural network. The performance of
both approaches is compared using benchmark data provided by
MCNC standard cell placement benchmark netlists. Analysis of the
investigational results proved that the fuzzy ARTMAP with
DBSCAN model achieves greater performance then only fuzzy
ARTMAP in recognizing sub-circuits with lowest amount of
interconnections between them The recognition rate using fuzzy
ARTMAP with DBSCAN is 97.7% compared to only fuzzy
ARTMAP.
Abstract: Ability of accurate and reliable location estimation in
indoor environment is the key issue in developing great number of
context aware applications and Location Based Services (LBS).
Today, the most viable solution for localization is the Received
Signal Strength (RSS) fingerprinting based approach using wireless
local area network (WLAN). This paper presents two RSS
fingerprinting based approaches – first we employ widely used
WLAN based positioning as a reference system and then investigate
the possibility of using GSM signals for positioning. To compare
them, we developed a positioning system in real world environment,
where realistic RSS measurements were collected. Multi-Layer
Perceptron (MLP) neural network was used as the approximation
function that maps RSS fingerprints and locations. Experimental
results indicate advantage of WLAN based approach in the sense of
lower localization error compared to GSM based approach, but GSM
signal coverage by far outreaches WLAN coverage and for some
LBS services requiring less precise accuracy our results indicate that
GSM positioning can also be a viable solution.
Abstract: In this paper, a comparative study of application of
supervised and unsupervised learning algorithms on illumination
invariant face recognition has been carried out. The supervised
learning has been carried out with the help of using a bi-layered
artificial neural network having one input, two hidden and one output
layer. The gradient descent with momentum and adaptive learning
rate back propagation learning algorithm has been used to implement
the supervised learning in a way that both the inputs and
corresponding outputs are provided at the time of training the
network, thus here is an inherent clustering and optimized learning of
weights which provide us with efficient results.. The unsupervised
learning has been implemented with the help of a modified
Counterpropagation network. The Counterpropagation network
involves the process of clustering followed by application of Outstar
rule to obtain the recognized face. The face recognition system has
been developed for recognizing faces which have varying
illumination intensities, where the database images vary in lighting
with respect to angle of illumination with horizontal and vertical
planes. The supervised and unsupervised learning algorithms have
been implemented and have been tested exhaustively, with and
without application of histogram equalization to get efficient results.
Abstract: When an assignable cause(s) manifests itself to a multivariate process and the process shifts to an out-of-control condition, a root-cause analysis should be initiated by quality engineers to identify and eliminate the assignable cause(s) affected the process. A root-cause analysis in a multivariate process is more complex compared to a univariate process. In the case of a process involved several correlated variables an effective root-cause analysis can be only experienced when it is possible to identify the required knowledge including the out-of-control condition, the change point, and the variable(s) responsible to the out-of-control condition, all simultaneously. Although literature addresses different schemes to monitor multivariate processes, one can find few scientific reports focused on all the required knowledge. To the best of the author’s knowledge this is the first time that a multi task model based on artificial neural network (ANN) is reported to monitor all the required knowledge at the same time for a multivariate process with more than two correlated quality characteristics. The performance of the proposed scheme is evaluated numerically when different step shifts affect the mean vector. Average run length is used to investigate the performance of the proposed multi task model. The simulated results indicate the multi task scheme performs all the required knowledge effectively.
Abstract: When binary decision diagrams are formed from
uniformly distributed Monte Carlo data for a large number of
variables, the complexity of the decision diagrams exhibits a
predictable relationship to the number of variables and minterms. In
the present work, a neural network model has been used to analyze the
pattern of shortest path length for larger number of Monte Carlo data
points. The neural model shows a strong descriptive power for the
ISCAS benchmark data with an RMS error of 0.102 for the shortest
path length complexity. Therefore, the model can be considered as a
method of predicting path length complexities; this is expected to lead
to minimum time complexity of very large-scale integrated circuitries
and related computer-aided design tools that use binary decision
diagrams.
Abstract: Pineapples can be classified using an index with seven
levels of maturity based on the green and yellow color of the skin. As
the pineapple ripens, the skin will change from pale green to a golden
or yellowish color. The issues that occur in agriculture nowadays are
to do with farmers being unable to distinguish between the indexes of
pineapple maturity correctly and effectively. There are several
reasons for why farmers cannot properly follow the guideline provide
by Federal Agriculture Marketing Authority (FAMA) and one of
reason is that due to manual inspection done by experts, there are no
specific and universal guidelines to be adopted by farmers due to the
different points of view of the experts when sorting the pineapples
based on their knowledge and experience. Therefore, an automatic
system will help farmers to identify pineapple maturity effectively
and will become a universal indicator to farmers.
Abstract: In many applications, it is a priori known that the
target function should satisfy certain constraints imposed by, for
example, economic theory or a human-decision maker. Here we
consider partially monotone problems, where the target variable
depends monotonically on some of the predictor variables but not all.
We propose an approach to build partially monotone models based
on the convolution of monotone neural networks and kernel
functions. The results from simulations and a real case study on
house pricing show that our approach has significantly better
performance than partially monotone linear models. Furthermore, the
incorporation of partial monotonicity constraints not only leads to
models that are in accordance with the decision maker's expertise,
but also reduces considerably the model variance in comparison to
standard neural networks with weight decay.
Abstract: The use of neural networks is popular in various
building applications such as prediction of heating load, ventilation
rate and indoor temperature. Significant is, that only few papers deal
with indoor carbon dioxide (CO2) prediction which is a very good
indicator of indoor air quality (IAQ). In this study, a data-driven
modelling method based on multilayer perceptron network for indoor
air carbon dioxide in an apartment building is developed.
Temperature and humidity measurements are used as input variables
to the network. Motivation for this study derives from the following
issues. First, measuring carbon dioxide is expensive and sensors
power consumptions is high and secondly, this leads to short
operating times of battery-powered sensors. The results show that
predicting CO2 concentration based on relative humidity and
temperature measurements, is difficult. Therefore, more additional
information is needed.
Abstract: The backpropagation algorithm in general employs quadratic error function. In fact, most of the problems that involve minimization employ the Quadratic error function. With alternative error functions the performance of the optimization scheme can be improved. The new error functions help in suppressing the ill-effects of the outliers and have shown good performance to noise. In this paper we have tried to evaluate and compare the relative performance of complex valued neural network using different error functions. During first simulation for complex XOR gate it is observed that some error functions like Absolute error, Cauchy error function can replace Quadratic error function. In the second simulation it is observed that for some error functions the performance of the complex valued neural network depends on the architecture of the network whereas with few other error functions convergence speed of the network is independent of architecture of the neural network.
Abstract: In this paper, the optimum weight and cost of a laminated composite plate is seeked, while it undergoes the heaviest load prior to a complete failure. Various failure criteria are defined for such structures in the literature. In this work, the Tsai-Hill theory is used as the failure criterion. The theory of analysis was based on the Classical Lamination Theory (CLT). A newly type of Genetic Algorithm (GA) as an optimization technique with a direct use of real variables was employed. Yet, since the optimization via GAs is a long process, and the major time is consumed through the analysis, Radial Basis Function Neural Networks (RBFNN) was employed in predicting the output from the analysis. Thus, the process of optimization will be carried out through a hybrid neuro-GA environment, and the procedure will be carried out until a predicted optimum solution is achieved.
Abstract: COSMED K4b2 is a portable electrical device designed to test pulmonary functions. It is ideal for many applications that need the measurement of the cardio-respiratory response either in the field or in the lab is capable with the capability to delivery real time data to a sink node or a PC base station with storing data in the memory at the same time. But the actual sensor outputs and data received may contain some errors, such as impulsive noise which can be related to sensors, low batteries, environment or disturbance in data acquisition process. These abnormal outputs might cause misinterpretations of exercise or living activities to persons being monitored. In our paper we propose an effective and feasible method to detect and identify errors in applications by principal component analysis (PCA) and a back propagation (BP) neural network.
Abstract: It has become crucial over the years for nations to
improve their credit scoring methods and techniques in light of the
increasing volatility of the global economy. Statistical methods or
tools have been the favoured means for this; however artificial
intelligence or soft computing based techniques are becoming
increasingly preferred due to their proficient and precise nature and
relative simplicity. This work presents a comparison between Support
Vector Machines and Artificial Neural Networks two popular soft
computing models when applied to credit scoring. Amidst the
different criteria-s that can be used for comparisons; accuracy,
computational complexity and processing times are the selected
criteria used to evaluate both models. Furthermore the German credit
scoring dataset which is a real world dataset is used to train and test
both developed models. Experimental results obtained from our study
suggest that although both soft computing models could be used with
a high degree of accuracy, Artificial Neural Networks deliver better
results than Support Vector Machines.
Abstract: Environmental micro-organisms include a large number of taxa and some species that are generally considered nonpathogenic, but can represent a risk in certain conditions, especially for elderly people and immunocompromised individuals. Chemotaxonomic identification techniques are powerful tools for environmental micro-organisms, and cellular fatty acid methyl esters (FAME) content is a powerful fingerprinting identification technique. A system based on an unsupervised artificial neural network (ANN) was set up using the fatty acid profiles of standard bacterial strains, obtained by gas-chromatography, used as learning data. We analysed 45 certified strains belonging to Acinetobacter, Aeromonas, Alcaligenes, Aquaspirillum, Arthrobacter, Bacillus, Brevundimonas, Enterobacter, Flavobacterium, Micrococcus, Pseudomonas, Serratia, Shewanella and Vibrio genera. A set of 79 bacteria isolated from a drinking water line (AMGA, the major water supply system in Genoa) were used as an example for identification compared to standard MIDI method. The resulting ANN output map was found to be a very powerful tool to identify these fresh isolates.
Abstract: Several combinations of the preprocessing algorithms,
feature selection techniques and classifiers can be applied to the data
classification tasks. This study introduces a new accurate classifier,
the proposed classifier consist from four components: Signal-to-
Noise as a feature selection technique, support vector machine,
Bayesian neural network and AdaBoost as an ensemble algorithm.
To verify the effectiveness of the proposed classifier, seven well
known classifiers are applied to four datasets. The experiments show
that using the suggested classifier enhances the classification rates for
all datasets.
Abstract: Landslide susceptibility map delineates the potential
zones for landslide occurrence. Previous works have applied
multivariate methods and neural networks for mapping landslide
susceptibility. This study proposed a new approach to integrate
decision tree model and spatial cluster statistic for assessing landslide
susceptibility spatially. A total of 2057 landslide cells were digitized
for developing the landslide decision tree model. The relationships of
landslides and instability factors were explicitly represented by using
tree graphs in the model. The local Getis-Ord statistics were used to
cluster cells with high landslide probability. The analytic result from
the local Getis-Ord statistics was classed to create a map of landslide
susceptibility zones. The map was validated using new landslide data
with 482 cells. Results of validation show an accuracy rate of 86.1% in
predicting new landslide occurrence. This indicates that the proposed
approach is useful for improving landslide susceptibility mapping.
Abstract: This paper presents dynamic voltage collapse prediction on an actual power system using support vector machines.
Dynamic voltage collapse prediction is first determined based on the PTSI calculated from information in dynamic simulation output. Simulations were carried out on a practical 87 bus test system by considering load increase as the contingency. The data collected from the time domain simulation is then used as input to the SVM in which support vector regression is used as a predictor to determine the
dynamic voltage collapse indices of the power system. To reduce training time and improve accuracy of the SVM, the Kernel function type and Kernel parameter are considered. To verify the
effectiveness of the proposed SVM method, its performance is compared with the multi layer perceptron neural network (MLPNN). Studies show that the SVM gives faster and more accurate results for dynamic voltage collapse prediction compared with the MLPNN.
Abstract: The aim of this contribution is to present a new
approach in modeling the electrical activity of the human heart. A
recurrent artificial neural network is being used in order to exhibit a
subset of the dynamics of the electrical behavior of the human heart.
The proposed model can also be used, when integrated, as a
diagnostic tool of the human heart system.
What makes this approach unique is the fact that every model is
being developed from physiological measurements of an individual.
This kind of approach is very difficult to apply successfully in many
modeling problems, because of the complexity and entropy of the
free variables describing the complex system. Differences between
the modeled variables and the variables of an individual, measured at
specific moments, can be used for diagnostic purposes. The sensor
fusion used in order to optimize the utilization of biomedical sensors
is another point that this paper focuses on. Sensor fusion has been
known for its advantages in applications such as control and
diagnostics of mechanical and chemical processes.