Abstract: In this paper, we proposed the distribution of mesh
normal vector direction as a feature descriptor of a 3D model. A
normal vector shows the entire shape of a model well. The
distribution of normal vectors was sampled in proportion to each
polygon's area so that the information on the surface with less surface
area may be less reflected on composing a feature descriptor in order
to enhance retrieval performance. At the analysis result of ANMRR,
the enhancement of approx. 12.4%~34.7% compared to the existing
method has also been indicated.
Abstract: Methanol-to-olefins coupled with transformation of
coal or natural gas to methanol gives an interesting and promising way
to produce ethylene and propylene. To investigate solid concentration
in gas-solid fluidized bed for methanol-to-olefins process catalyzed by
SAPO-34, a cold model experiment system is established in this paper.
The system comprises a gas distributor in a 300mm internal diameter
and 5000mm height acrylic column, the fiber optic probe system and
series of cyclones. The experiments are carried out at ambient
conditions and under different superficial gas velocity ranging from
0.3930m/s to 0.7860m/s and different initial bed height ranging from
600mm to 1200mm. The effects of radial distance, axial distance,
superficial gas velocity, initial bed height on solid concentration in the
bed are discussed. The effects of distributor shape and porosity on
solid concentration are also discussed. The time-averaged solid
concentration profiles under different conditions are obtained.
Abstract: The recent advances in computational fluid dynamics
(CFD) can be useful in observing the detailed hemodynamics in
cerebral aneurysms for understanding not only their formation and
rupture but also for clinical evaluation and treatment. However,
important hemodynamic quantities are difficult to measure in vivo. In
the present study, an approximate model of normal middle cerebral
artery (MCA) along with two cases consisting broad and narrow
saccular aneurysms are analyzed. The models are generated in
ANSYS WORKBENCH and transient analysis is performed in
ANSYS-CFX. The results obtained are compared for three cases and
agree well with the available literature.
Abstract: This paper introduces an intelligent system, which can be applied in the monitoring of vehicle speed using a single camera. The ability of motion tracking is extremely useful in many automation problems and the solution to this problem will open up many future applications. One of the most common problems in our daily life is the speed detection of vehicles on a highway. In this paper, a novel technique is developed to track multiple moving objects with their speeds being estimated using a sequence of video frames. Field test has been conducted to capture real-life data and the processed results were presented. Multiple object problems and noisy in data are also considered. Implementing this system in real-time is straightforward. The proposal can accurately evaluate the position and the orientation of moving objects in real-time. The transformations and calibration between the 2D image and the actual road are also considered.
Abstract: This paper presents the cepstral and trispectral
analysis of a speech signal produced by normal men, men with
defective audition (deaf, deep deaf) and others affected by
tracheotomy, the trispectral analysis based on parametric methods
(Autoregressive AR) using the fourth order cumulant. These
analyses are used to detect and compare the pitches and the formants
of corresponding voiced sounds (vowel \a\, \i\ and \u\). The first
results appear promising, since- it seems after several experimentsthere
is no deformation of the spectrum as one could have supposed
it at the beginning, however these pathologies influenced the two
characteristics:
The defective audition influences to the formants contrary to the
tracheotomy, which influences the fundamental frequency (pitch).
Abstract: This manuscript presents, palmprint recognition by
combining different texture extraction approaches with high accuracy.
The Region of Interest (ROI) is decomposed into different frequencytime
sub-bands by wavelet transform up-to two levels and only the
approximate image of two levels is selected, which is known as
Approximate Image ROI (AIROI). This AIROI has information of
principal lines of the palm. The Competitive Index is used as the
features of the palmprint, in which six Gabor filters of different
orientations convolve with the palmprint image to extract the orientation
information from the image. The winner-take-all strategy
is used to select dominant orientation for each pixel, which is
known as Competitive Index. Further, PCA is applied to select highly
uncorrelated Competitive Index features, to reduce the dimensions of
the feature vector, and to project the features on Eigen space. The
similarity of two palmprints is measured by the Euclidean distance
metrics. The algorithm is tested on Hong Kong PolyU palmprint
database. Different AIROI of different wavelet filter families are also
tested with the Competitive Index and PCA. AIROI of db7 wavelet
filter achievs Equal Error Rate (EER) of 0.0152% and Genuine
Acceptance Rate (GAR) of 99.67% on the palm database of Hong
Kong PolyU.
Abstract: The recent development of Information and Communication Technology (ICT) enables new ways of "democratic" decision-making such as a page-ranking system, which estimates the importance of a web page based on indirect trust on that page shared by diverse group of unorganized individuals. These kinds of "democracy" have not been acclaimed yet in the world of real politics. On the other hand, a large amount of data about personal relations including trust, norms of reciprocity, and networks of civic engagement has been accumulated in a computer-readable form by computer systems (e.g., social networking systems). We can use these relations as a new type of social capital to construct a new democratic decision-making system based on a delegation network. In this paper, we propose an effective decision-making support system, which is based on empowering someone's vote whom you trust. For this purpose, we propose two new techniques: the first is for estimating entire vote distribution from a small number of votes, and the second is for estimating active voter choice to promote voting using a delegation network. We show that these techniques could increase the voting ratio and credibility of the whole decision by agent-based simulations.
Abstract: The dramatic effect of information technology on
society is undeniable. In education, it is evident in the use of terms
like active learning, blended learning, electronic learning and mobile
learning (ubiquitous learning). This study explores the perceptions of
54 learners in a higher education institution regarding the use of
mobile devices in a third year module. Using semi-structured
interviews, it was found that mobile devices had a positive impact on
learner motivation, engagement and enjoyment. It also improved the
consistency of learning material, and the convenience and flexibility
(anywhere, anytime) of learning. User-interfacelimitation, bandwidth
and cognitive overload, however, were of concern. The use of cloud
based resources like Youtube and Google Docs, through mobile
devices, positively influenced learner perceptions, making them
prosumers (both consumers and producers) of education content.
Abstract: One of the most importance of intelligence in-car and
roadside systems is the cooperative vehicle-infrastructure system. In
Thailand, ITS technologies are rapidly growing and real-time vehicle
information is considerably needed for ITS applications; for example,
vehicle fleet tracking and control and road traffic monitoring
systems. This paper defines the communication protocols and
software design for middleware components of B-VIS (Burapha
Vehicle-Infrastructure System). The proposed B-VIS middleware architecture serves the needs of a distributed RFID sensor network and simplifies some intricate details of several communication standards.
Abstract: There has been gradual progress of late in construction projects, particularly in big-scale megaprojects. Due to the long-term construction period, however, with large-scale budget investment, lack of construction management technologies, and increase in the incomplete elements of project schedule management, a plan to conduct efficient operations and to ensure business safety is required. In particular, as the project management information system (PMIS) is meant for managing a single project centering on the construction phase, there is a limitation in the management of program-scale businesses like megaprojects. Thus, a program management information system (PgMIS) that includes program-level management technologies is needed to manage multiple projects. In this study, a support tool was developed for managing the cost and schedule information occurring in the construction phase, at the program level. In addition, a case study on the developed support tool was conducted to verify the usability of the system. With the use of the developed support tool program, construction managers can monitor the progress of the entire project and of the individual subprojects in real time.
Abstract: In this paper, we propose a novel approach for image
segmentation via fuzzification of Rènyi Entropy of Generalized
Distributions (REGD). The fuzzy REGD is used to precisely measure
the structural information of image and to locate the optimal
threshold desired by segmentation. The proposed approach draws
upon the postulation that the optimal threshold concurs with
maximum information content of the distribution. The contributions
in the paper are as follow: Initially, the fuzzy REGD as a measure of
the spatial structure of image is introduced. Then, we propose an
efficient entropic segmentation approach using fuzzy REGD.
However the proposed approach belongs to entropic segmentation
approaches (i.e. these approaches are commonly applied to grayscale
images), it is adapted to be viable for segmenting color images.
Lastly, diverse experiments on real images that show the superior
performance of the proposed method are carried out.
Abstract: South Africa is facing a crisis with not being able to produce enough graduates in the scarce skills areas to sustain economic growth. The crisis is fuelled by a school system that does not produce enough potential students with Mathematics, Accounting and Science. Since the introduction of the new school curriculum in 2008, there is no longer an option to take pure maths on a standard grade level. Instead, only two mathematical subjects are offered: pure maths (which is on par with higher grade maths) and mathematical literacy. It is compulsory to take one or the other. As a result, lees student finishes Grade 12 with pure mathematics every year. This national problem needs urgent attention if South Africa is to make any headway in critical skills development as mathematics is a gateway to scarce skills professions. Higher education institutions initiated several initiatives in an attempt to address the above, including preparatory courses, bridging programmes and extended curricula with foundation provisions. In view of the above, and government policy directives to broaden access in the scarce skills areas to increase student throughput, foundation provision was introduced for Commerce and Information Technology programmes at the Vaal Triangle Campus (VTC) of North-West University (NWU) in 2010. Students enrolling for extended programmes do not comply with the minimum prerequisites for the normal programmes. The question then arises as to whether these programmes have the intended impact? This paper reports the results of a two year longitudinal study, tracking the first year academic achievement of the two cohorts of enrolments since 2010. The results provide valuable insight into the structuring of an extended programme and its potential impact.
Abstract: The medical studies often require different methods
for parameters selection, as a second step of processing, after the
database-s designing and filling with information. One common
task is the selection of fields that act as risk factors using wellknown
methods, in order to find the most relevant risk factors and
to establish a possible hierarchy between them. Different methods
are available in this purpose, one of the most known being the
binary logistic regression. We will present the mathematical
principles of this method and a practical example of using it in the
analysis of the influence of 10 different psychiatric diagnostics
over 4 different types of offences (in a database made from 289
psychiatric patients involved in different types of offences).
Finally, we will make some observations about the relation
between the risk factors hierarchy established through binary
logistic regression and the individual risks, as well as the results of
Chi-squared test. We will show that the hierarchy built using the
binary logistic regression doesn-t agree with the direct order of risk
factors, even if it was naturally to assume this hypothesis as being
always true.
Abstract: In this work, an organic compound 5,10,15,20-
Tetrakis(3,5-di-tertbutylphenyl)porphyrinatocopper(II) (TDTBPPCu)
is studied as an active material for thin film electronic devices. To
investigate the electrical properties of TDTBPPCu, junction of
TDTBPPCu with heavily doped n-Si and Al is fabricated.
TDTBPPCu film was sandwiched between Al and n-Si electrodes.
Various electrical parameters of TDTBPPCu are determined. The
current-voltage characteristics of the junction are nonlinear,
asymmetric and show rectification behavior, which gives the clue of
formation of depletion region. This behavior indicates the potential
of TDTBPPCu for electronics applications. The current-voltage and
capacitance-voltage techniques are used to find the different
electronic parameters.
Abstract: The market transformation in Kazakhstan during the
last two decades has essentially strengthened a gap between
development of urban and rural areas. Implementation of market
institutes, transition from public financing to paid rendering of social
services, change of forms of financing of social and economic
infrastructure have led to strengthening of an economic inequality of
social groups, including growth of stratification of the city and the
village. Sociological survey of urban and rural households in Almaty
city and villages of Almaty region has been carried out within the
international research project “Livelihoods Strategies of Private
Households in Central Asia: A Rural–Urban Comparison in
Kazakhstan and Kyrgyzstan" (Germany, Kazakhstan, Kyrgyzstan).
The analysis of statistical data and results of sociological research of
urban and rural households allows us to reveal issues of territorial
development, to investigate an availability of medical, educational
and other services in the city and the village, to reveal an evaluation
urban and rural dwellers of living conditions, to compare economic
strategies of households in the city and the village.
Abstract: Multi-agent communication of Semantic Web
information cannot be realized without the need to reason with
ontology and agent locations. This is because for an agent to be able to
reason with an external semantic web ontology, it must know where
and how to access to that ontology. Similarly, for an agent to be able to
communicate with another agent, it must know where and how to send
a message to that agent. In this paper we propose a framework of an
agent which can reason with ontology and agent locations in order to
perform reasoning with multiple distributed ontologies and perform
communication with other agents on the semantic web. The agent
framework and its communication mechanism are formulated entirely
in meta-logic.
Abstract: Anaerobic Digestion has become a promising
technology for biological transformation of organic fraction of the
municipal solid wastes (MSW). In order to represent the kinetic
behavior of such biological process and thereby to design a reactor
system, development of a mathematical model is essential.
Addressing this issue, a simplistic mathematical model has been
developed for anaerobic digestion of MSW in a continuous flow
reactor unit under homogeneous steady state condition. Upon
simulated hydrolysis, the kinetics of biomass growth and substrate
utilization rate are assumed to follow first order reaction kinetics.
Simulation of this model has been conducted by studying sensitivity
of various process variables. The model was simulated using typical
kinetic data of anaerobic digestion MSW and typical MSW
characteristics of Kolkata. The hydraulic retention time (HRT) and
solid retention time (SRT) time were mainly estimated by varying
different model parameters like efficiency of reactor, influent
substrate concentration and biomass concentration. Consequently,
design table and charts have also been prepared for ready use in the
actual plant operation.
Abstract: This paper presents parametric probability density
models for call holding times (CHTs) into emergency call center
based on the actual data collected for over a week in the public
Emergency Information Network (EIN) in Mongolia. When the set of
chosen candidates of Gamma distribution family is fitted to the call
holding time data, it is observed that the whole area in the CHT
empirical histogram is underestimated due to spikes of higher
probability and long tails of lower probability in the histogram.
Therefore, we provide the Gaussian parametric model of a mixture of
lognormal distributions with explicit analytical expressions for the
modeling of CHTs of PSNs. Finally, we show that the CHTs for
PSNs are fitted reasonably by a mixture of lognormal distributions
via the simulation of expectation maximization algorithm. This result
is significant as it expresses a useful mathematical tool in an explicit
manner of a mixture of lognormal distributions.
Abstract: World has entered in 21st century. The technology of
computer graphics and digital cameras is prevalent. High resolution
display and printer are available. Therefore high resolution images
are needed in order to produce high quality display images and high
quality prints. However, since high resolution images are not usually
provided, there is a need to magnify the original images. One
common difficulty in the previous magnification techniques is that of
preserving details, i.e. edges and at the same time smoothing the data
for not introducing the spurious artefacts. A definitive solution to this
is still an open issue. In this paper an image magnification using
adaptive interpolation by pixel level data-dependent geometrical
shapes is proposed that tries to take into account information about
the edges (sharp luminance variations) and smoothness of the image.
It calculate threshold, classify interpolation region in the form of
geometrical shapes and then assign suitable values inside
interpolation region to the undefined pixels while preserving the
sharp luminance variations and smoothness at the same time.
The results of proposed technique has been compared qualitatively
and quantitatively with five other techniques. In which the qualitative
results show that the proposed method beats completely the Nearest
Neighbouring (NN), bilinear(BL) and bicubic(BC) interpolation. The
quantitative results are competitive and consistent with NN, BL, BC
and others.
Abstract: The rapid advance of communication technology is
evolving the network environment into the broadband convergence
network. Likewise, the IT services operated in the individual network
are also being quickly converged in the broadband convergence
network environment. VoIP and IPTV are two examples of such new
services. Efforts are being made to develop the video phone service,
which is an advanced form of the voice-oriented VoIP service.
However, the new IT services will be subject to stability and reliability
vulnerabilities if the relevant security issues are not answered during
the convergence of the existing IT services currently being operated in
individual networks within the wider broadband network
environment. To resolve such problems, this paper attempts to analyze
the possible threats and identify the necessary security measures
before the deployment of the new IT services. Furthermore, it
measures the quality of the encryption algorithm application example
to describe the appropriate algorithm in order to present security
technology that will have no negative impact on the quality of the
video phone service.