Abstract: The introduction of degradable plastic materials into
agricultural sectors has represented a promising alternative to
promote green agriculture and environmental friendly of modern
farming practices. Major challenges of developing degradable
agricultural films are to identify the most feasible types of
degradation mechanisms, composition of degradable polymers and
related processing techniques. The incorrect choice of degradable
mechanisms to be applied during the degradation process will cause
premature losses of mechanical performance and strength. In order to
achieve controlled process of agricultural film degradation, the
compositions of degradable agricultural film also important in order
to stimulate degradation reaction at required interval of time and to
achieve sustainability of the modern agricultural practices. A set of
photodegradable polyethylene based agricultural film was developed
and produced, following the selective optimization of processing
parameters of the agricultural film manufacturing system. Example of
agricultural films application for oil palm seedlings cultivation is
presented.
Abstract: In recent years parasitic antenna play major role in
MIMO systems because of their gain and spectral efficiency. In this
paper, single RF chain MIMO transmitter is designed using
reconfigurable parasitic antenna. The Spatial Modulation (SM) is a
recently proposed scheme in MIMO scenario which activates only
one antenna at a time. The SM entirely avoids ICI and IAS, and only
requires a single RF chain at the transmitter. This would switch ON a
single transmit-antenna for data transmission while all the other
antennas are kept silent. The purpose of the parasitic elements is to
change the radiation pattern of the radio waves which is emitted from
the driven element and directing them in one direction and hence
introduces transmit diversity. Diode is connect between the patch and
ground by changing its state (ON and OFF) the parasitic element act
as reflector and director and also capable of steering azimuth and
elevation angle. This can be achieved by changing the input
impedance of each parasitic element through single RF chain. The
switching of diode would select the single parasitic antenna for
spatial modulation. This antenna is expected to achieve maximum
gain with desired efficiency.
Abstract: Recently, the green architecture becomes a
significant way to a sustainable future. Green building designs
involve finding the balance between comfortable homebuilding and
sustainable environment. Moreover, the utilization of the new
technologies such as artificial intelligence techniques are used to
complement current practices in creating greener structures to keep
the built environment more sustainable. The most common objectives
in green buildings should be designed to minimize the overall impact
of the built environment that effect on ecosystems in general and in
particularly human health and natural environment. This will lead to
protecting occupant health, improving employee productivity,
reducing pollution and sustaining the environmental. In green
building design, multiple parameters which may be interrelated,
contradicting, vague and of qualitative/quantitative nature are
broaden to use. This paper presents a comprehensive critical state- ofart-
review of current practices based on fuzzy and its combination
techniques. Also, presented how green architecture/building can be
improved using the technologies that been used for analysis to seek
optimal green solutions strategies and models to assist in making the
best possible decision out of different alternatives.
Abstract: The formulated problem of optimization of the
technological process of water treatment for thermal power plants is
considered in this article. The problem is of multiparametric nature.
To optimize the process, namely, reduce the amount of waste water, a
new technology was developed to reuse such water. A mathematical
model of the technology of wastewater reuse was developed.
Optimization parameters were determined. The model consists of a
material balance equation, an equation describing the kinetics of ion
exchange for the non-equilibrium case and an equation for the ion
exchange isotherm. The material balance equation includes a
nonlinear term that depends on the kinetics of ion exchange. A direct
problem of calculating the impurity concentration at the outlet of the
water treatment plant was numerically solved. The direct problem
was approximated by an implicit point-to-point computation
difference scheme. The inverse problem was formulated as relates to
determination of the parameters of the mathematical model of the
water treatment plant operating in non-equilibrium conditions. The
formulated inverse problem was solved. Following the results of
calculation the time of start of the filter regeneration process was
determined, as well as the period of regeneration process and the
amount of regeneration and wash water. Multi-parameter
optimization of water treatment process for thermal power plants
allowed decreasing the amount of wastewater by 15%.
Abstract: This paper reports the numerical simulation of doublediffusive
natural convection flows within a horizontal annular filled
with a saturated porous medium. The analysis concerns the influence
of the different parameters governing the problem, namely, the
Rayleigh number Ra, the Lewis number Le and the buoyancy ratio N,
on the heat and mass transfer and on the flow structure, in the case of
a fixed radius ratio R = 2. The numerical model used for the
discretization of the dimensionless equations governing the problem
is based on the finite difference method, using the ADI scheme. The
study is focused on steady-state solutions in the cooperation situation.
Abstract: This paper introduces a proposal scheme for an
Intelligent System applied to Pedagogical Advising using Case-Based
Reasoning, to find consolidated solutions before used for the new
problems, making easier the task of advising students to the
pedagogical staff. We do intend, through this work, introduce the
motivation behind the choices for this system structure, justifying the
development of an incremental and smart web system who learns
bests solutions for new cases when it’s used, showing technics and
technology.
Abstract: We address the integer frequency offset (IFO)
estimation under the influence of the timing offset (TO) in orthogonal
frequency division multiplexing (OFDM) systems. Incorporating the
IFO and TO into the symbol set used to represent the received
OFDM symbol, we investigate the influence of the TO on the IFO,
and then, propose a combining method between two consecutive
OFDM correlations, reducing the influence. The proposed scheme
has almost the same complexity as that of the conventional
schemes, whereas it does not need the TO knowledge contrary to
the conventional schemes. From numerical results it is confirmed
that the proposed scheme is insensitive to the TO, consequently,
yielding an improvement of the IFO estimation performance over
the conventional schemes when the TO exists.
Abstract: Offering a Product-Service System (PSS) is a
well-accepted strategy that companies may adopt to provide a set of
systemic solutions to customers. PSSs were initially provided in a
simple form but now take diversified and complex forms involving
multiple services, products and technologies. With the growing
interest in the PSS, frameworks for the PSS development have been
introduced by many researchers. However, most of the existing
frameworks fail to examine various relations existing in a complex
PSS. Since designing a complex PSS involves full integration of
multiple products and services, it is essential to identify not only
product-service relations but also product-product/ service-service
relations. It is also equally important to specify how they are related
for better understanding of the system. Moreover, as customers tend to
view their purchase from a more holistic perspective, a PSS should be
developed based on the whole system’s requirements, rather than
focusing only on the product requirements or service requirements.
Thus, we propose a framework to develop a complex PSS that is
coordinated fully with the requirements of both worlds. Specifically,
our approach adopts a multi-domain matrix (MDM). A MDM
identifies not only inter-domain relations but also intra-domain
relations so that it helps to design a PSS that includes highly desired
and closely related core functions/ features. Also, various dependency
types and rating schemes proposed in our approach would help the
integration process.
Abstract: The thermal behavior of a large-scale, phase change material (PCM) enhanced building envelope system was studied in regard to the need for pre-fabricated construction in subtropical regions. The proposed large-scale envelope consists of a reinforced aluminum skin, insulation core, phase change material and reinforced gypsum board. The PCM impact on an energy efficiency of an enveloped room was resolved by validation of the EnergyPlus numerical scheme and optimization of a smart material location in the core. The PCM location was optimized by a minimization method of a cooling energy demand. It has been shown that there is good agreement between the test and simulation results. The optimal location of the PCM layer in Hong Kong summer conditions has been then recomputed for core thicknesses of 40, 60 and 80 mm. A non-dimensional value of the optimal PCM location was obtained to be same for all the studied cases and the considered external and internal conditions.
Abstract: In this paper, effects of using Alumina-water
nanofluid on the rate of heat transfer have been investigated
numerically. Physical model is a square enclosure with insulated top
and bottom horizontal walls, while the vertical walls are kept at
different constant temperatures. Two appropriate models are used to
evaluate the viscosity and thermal conductivity of nanofluid. The
governing stream-vorticity equations are solved using a second order
central finite difference scheme, coupled to the conservation of mass
and energy. The study has been carried out for the Richardson
number 0.1 to 10 and the solid volume fraction 0 to 0.04. Results are
presented by isotherms lines, average Nusselt number and normalized
Nusselt number in different range of φ and Ri for forced, combined
and natural convection dominated regime. It is found that higher heat
transfer rate is predicted when the effects of nanoparticle is taken into
account.
Abstract: A well designed and executed Production Planning
and Control (PPC) system is one of the key levers for superior
performance in the current manufacturing set-up. Hence, measuring
the PPC system performance has become a necessity for long term
success. The present study examined PPC related issues which
impact the production capacity and productivity of leather companies
with special focus on Kombolcha Tannery Share Company (KTSC),
Ethiopia. Physical observation, interview, and questionnaire were
used to generate necessary information from the respondents and
reach valid conclusions. Company annual reports were referred and
analyzed to triangulate primary data. Consequently, the study
revealed that KTSC runs below its capacity due to its inefficient PPC
system being in use for which the root causes were identified. The
study thereby conceptualizes a PPC system improvement framework
comprising three pillars viz., management culture, internal capability
and performance measurement together with key considerations in
each case. The study findings enable the company to recognize the
importance of efficient PPC system as a source of competitive
advantage. It also aid managers in evaluating various PPC execution
schemes to enhance productivity.
Abstract: This paper addresses the issue of the autonomous
mobile robot (AMR) navigation task based on the hybrid control
modes. The novel hybrid control mode, based on multi-sensors
information by using the fuzzy approach, has been presented in this
research. The system operates in real time, is robust, enables the robot
to operate with imprecise knowledge, and takes into account the
physical limitations of the environment in which the robot moves,
obtaining satisfactory responses for a large number of different
situations. An experiment is simulated and carried out with a pioneer
mobile robot. From the experimental results, the effectiveness and
usefulness of the proposed AMR obstacle avoidance and navigation
scheme are confirmed. The experimental results show the feasibility,
and the control system has improved the navigation accuracy. The
implementation of the controller is robust, has a low execution time,
and allows an easy design and tuning of the fuzzy knowledge base.
Abstract: Presently, it is necessary to ensure the sustainable
development of passenger and freight transport. Increasing
performance of road freight has had a negative impact to environment
and society. It is therefore necessary to increase the competitiveness
of intermodal transport, which is more environmentally friendly. The
study describes the effectiveness of logistical centers realization for
companies and society and research how the partial internalization of
external costs reflected in the efficient use of these centers and
increase the competitiveness of intermodal transport to road freight.
In our research, we use the method of comparative analysis and
market research to describe the advantages of logistic centers for their
users as well as for society as a whole. Method normal costing is used
for calculation infrastructure and total costs, method of conversion
costing for determine the external costs. We modelled total society
costs for road freight transport and inter modal transport chain (we
assumed that most of the traffic is carried by rail) with different
loading schemes for condition in the Slovak Republic. Our research
has shown that higher utilization of inter modal transport chain do
good not only for society, but for companies providing freight
services too. Increase in use of inter modal transport chain can bring
many benefits to society that do not bring direct immediate financial
return. They often bring the multiplier effects, such as greater use of
environmentally friendly transport mode and reduce the total society
costs.
Abstract: This paper describes the problem of building secure
computational services for encrypted information in the Cloud
Computing without decrypting the encrypted data; therefore, it meets
the yearning of computational encryption algorithmic aspiration
model that could enhance the security of big data for privacy,
confidentiality, availability of the users. The cryptographic model
applied for the computational process of the encrypted data is the
Fully Homomorphic Encryption Scheme. We contribute a theoretical
presentations in a high-level computational processes that are based
on number theory and algebra that can easily be integrated and
leveraged in the Cloud computing with detail theoretic mathematical
concepts to the fully homomorphic encryption models. This
contribution enhances the full implementation of big data analytics
based cryptographic security algorithm.
Abstract: Multi-Level Inverter technology has been developed in the area of high-power medium-voltage energy scheme, because of their advantages such as devices of lower rating can be used thereby enabling the schemes to be used for high voltage applications. Reduced Total Harmonic Distortion (THD).Since the dv/dt is low; the Electromagnetic Interference from the scheme is low. To avoid the switching losses Lower switching frequencies can be used. In this paper present a survey of various topologies, control strategy and modulation techniques used by these inverters. Here the regenerative and superior topologies are also discussed.
Abstract: Due to the rapid increase of Internet, web opinion
sources dynamically emerge which is useful for both potential
customers and product manufacturers for prediction and decision
purposes. These are the user generated contents written in natural
languages and are unstructured-free-texts scheme. Therefore, opinion
mining techniques become popular to automatically process customer
reviews for extracting product features and user opinions expressed
over them. Since customer reviews may contain both opinionated and
factual sentences, a supervised machine learning technique applies
for subjectivity classification to improve the mining performance. In
this paper, we dedicate our work is the task of opinion
summarization. Therefore, product feature and opinion extraction is
critical to opinion summarization, because its effectiveness
significantly affects the identification of semantic relationships. The
polarity and numeric score of all the features are determined by
Senti-WordNet Lexicon. The problem of opinion summarization
refers how to relate the opinion words with respect to a certain
feature. Probabilistic based model of supervised learning will
improve the result that is more flexible and effective.
Abstract: We propose a code acquisition scheme called improved
multiple-shift (IMS) for optical code division multiple access
systems, where the optical orthogonal code is used instead of the
pseudo noise code. Although the IMS algorithm has a similar process
to that of the conventional MS algorithm, it has a better code
acquisition performance than the conventional MS algorithm. We
analyze the code acquisition performance of the IMS algorithm and
compare the code acquisition performances of the MS and the IMS
algorithms in single-user and multi-user environments.
Abstract: IEEE 802.11a/b/g standards provide multiple
transmission rates, which can be changed dynamically according to the
channel condition. Cooperative communications were introduced to
improve the overall performance of wireless LANs with the help of
relay nodes with higher transmission rates. The cooperative
communications are based on the fact that the transmission is much
faster when sending data packets to a destination node through a relay
node with higher transmission rate, rather than sending data directly to
the destination node at low transmission rate. To apply the cooperative
communications in wireless LAN, several MAC protocols have been
proposed. Some of them can result in collisions among relay nodes in a
dense network. In order to solve this problem, we propose a new
protocol. Relay nodes are grouped based on their transmission rates.
And then, relay nodes only in the highest group try to get channel
access. Performance evaluation is conducted using simulation, and
shows that the proposed protocol significantly outperforms the
previous protocol in terms of throughput and collision probability.
Abstract: The wide use of the Internet-based applications bring many challenges to the researchers to guarantee the continuity of the connections needed by the mobile hosts and provide reliable Internet access for them. One of proposed solutions by Internet Engineering Task Force (IETF) is to connect the local, multi-hop, and infrastructure-less Mobile Ad hoc Network (MANET) with Internet structure. This connection is done through multi-interface devices known as Internet Gateways. Many issues are related to this connection like gateway discovery, handoff, address auto-configuration and selecting the optimum gateway when multiple gateways exist. Many studies were done proposing gateway selection schemes with a single selection criterion or weighted multiple criteria. In this research, a review of some of these schemes is done showing the differences, the features, the challenges and the drawbacks of each of them.
Abstract: IEEE 802.16 (WiMAX) aims to present high speed
wireless access to cover wide range coverage. The base station (BS)
and the subscriber station (SS) are the main parts of WiMAX.
WiMAX uses either Point-to-Multipoint (PMP) or mesh topologies.
In the PMP mode, the SSs connect to the BS to gain access to the
network. However, in the mesh mode, the SSs connect to each other
to gain access to the BS.
The main components of QoS management in the 802.16 standard
are the admission control, buffer management and packet scheduling.
In this paper, we use QualNet 5.0.2 to study the performance of
different scheduling schemes, such as WFQ, SCFQ, RR and SP when
the numbers of SSs increase. We find that when the number of SSs
increases, the average jitter and average end-to-end delay is increased
and the throughput is reduced.