Abstract: In this paper, the position control of an electronic
throttle actuator is outlined. The dynamic behavior of the actuator is
described with the help of an uncertain plant model. This motivates
the controller design based on the ideas of higher-order slidingmodes.
As a consequence anti-chattering techniques can be omitted.
It is shown that the same concept is applicable to estimate unmeasureable
signals. The control law and the observer are implemented on
an electronic control unit. Results achieved by numerical simulations
and real world experiments are presented and discussed.
Abstract: We study the problem of reconstructing a three dimensional binary matrices whose interiors are only accessible through few projections. Such question is prominently motivated by the demand in material science for developing tool for reconstruction of crystalline structures from their images obtained by high-resolution transmission electron microscopy. Various approaches have been suggested to reconstruct 3D-object (crystalline structure) by reconstructing slice of the 3D-object. To handle the ill-posedness of the problem, a priori information such as convexity, connectivity and periodicity are used to limit the number of possible solutions. Formally, 3Dobject (crystalline structure) having a priory information is modeled by a class of 3D-binary matrices satisfying a priori information. We consider 3D-binary matrices with periodicity constraints, and we propose a polynomial time algorithm to reconstruct 3D-binary matrices with periodicity constraints from two orthogonal projections.
Abstract: This paper presents a linear stability analysis of
natural convection in a horizontal layer of a viscoelastic
nanofluid. The Oldroyd B model was utilized to describe the
rheological behavior of a viscoelastic nanofluid. The model
used for the nanofluid incorporated the effects of Brownian
motion and thermophoresis. The onset criterion for stationary
and oscillatory convection was derived analytically. The effects
of the Deborah number, retardation parameters, concentration
Rayleigh number, Prandtl number, and Lewis number on the
stability of the system were investigated. Results indicated that
there was competition among the processes of thermophoresis,
Brownian diffusion, and viscoelasticity which caused
oscillatory rather than stationary convection to occur.
Oscillatory instability is possible with both bottom- and
top-heavy nanoparticle distributions. Regimes of stationary and
oscillatory convection for various parameters were derived and
are discussed in detail.
Abstract: Functional imaging procedures for the non-invasive assessment of tissue microcirculation are highly requested, but require a mathematical approach describing the trans- and intercapillary passage of tracer particles. Up to now, two theoretical, for the moment different concepts have been established for tracer kinetic modeling of contrast agent transport in tissues: pharmacokinetic compartment models, which are usually written as coupled differential equations, and the indicator dilution theory, which can be generalized in accordance with the theory of lineartime- invariant (LTI) systems by using a convolution approach. Based on mathematical considerations, it can be shown that also in the case of an open two-compartment model well-known from functional imaging, the concentration-time course in tissue is given by a convolution, which allows a separation of the arterial input function from a system function being the impulse response function, summarizing the available information on tissue microcirculation. Due to this reason, it is possible to integrate the open two-compartment model into the system-theoretic concept of indicator dilution theory (IDT) and thus results known from IDT remain valid for the compartment approach. According to the long number of applications of compartmental analysis, even for a more general context similar solutions of the so-called forward problem can already be found in the extensively available appropriate literature of the seventies and early eighties. Nevertheless, to this day, within the field of biomedical imaging – not from the mathematical point of view – there seems to be a trench between both approaches, which the author would like to get over by exemplary analysis of the well-known model.
Abstract: The purpose of this study is to identify and evaluate
the scale of implementation of Just-In-Time (JIT) in the different industrial sectors in the Middle East. This study analyzes the empirical data collected by a questionnaire survey distributed to
companies in three main industrial sectors in the Middle East, which
are: food, chemicals and fabrics. The following main hypotheses is formulated and tested: (The requirements of JIT application differ
according to the type of industrial sector).Descriptive statistics and Box plot analysis were used to examine the hypotheses. This study indicates a reasonable evidence for accepting the main hypotheses. It
reveals that there is no standard way to adopt JIT as a production system. But each industrial sector should concentrate in the
investment on critical requirements that differ according to the nature
and strategy of production followed in that sector.
Abstract: This paper describes the evolution of language
politics and the part played by political leaders with reference to
the Dravidian parties in Tamil Nadu. It explores the interesting
evolution from separatism to coalition in sustaining the values of
parliamentary democracy and federalism. It seems that the
appropriation of language politics is fully ascribed to the DMK
leadership under Annadurai and Karunanidhi. For them, the Tamil
language is a self-determining power, a terrain of nationhood, and
a perennial source of social and political powers. The DMK
remains a symbol of Tamil nationalist party playing language
politics in the interest of the Tamils. Though electoral alliances
largely determine the success, the language politics still has
significant space in the politics of Tamil Nadu. Ironically, DMK
moves from the periphery to centre for getting national recognition
for the Tamils as well as for its own maximization of power. The
evolution can be seen in two major phases as: language politics for
party building; and language politics for state building with three
successive political processes, namely, language politics in the
process of separatism, representative politics and coalition. The
much pronounced Dravidian Movement is radical enough to
democratize the party ideology to survive the spirit of
parliamentary democracy. This has secured its own rewards in
terms of political power. The political power provides the means to
achieve the social and political goal of the political party.
Language politics and leadership pattern actualized this trend
though the movement is shifted from separatism to coalition.
Abstract: The purpose of this paper is to propose a framework for constructing correct parallel processing programs based on Equivalent Transformation Framework (ETF). ETF regards computation as In the framework, a problem-s domain knowledge and a query are described in definite clauses, and computation is regarded as transformation of the definite clauses. Its meaning is defined by a model of the set of definite clauses, and the transformation rules generated must preserve meaning. We have proposed a parallel processing method based on “specialization", a part of operation in the transformations, which resembles substitution in logic programming. The method requires “Memo-tree", a history of specialization to maintain correctness. In this paper we proposes the new method for the specialization-base parallel processing without Memo-tree.
Abstract: Recently the usefulness of Concept Abduction, a novel non-monotonic inference service for Description Logics (DLs), has been argued in the context of ontology-based applications such as semantic matchmaking and resource retrieval. Based on tableau calculus, a method has been proposed to realize this reasoning task in ALN, a description logic that supports simple cardinality restrictions as well as other basic constructors. However, in many ontology-based systems, the representation of ontology would require expressive formalisms for capturing domain-specific constraints, this language is not sufficient. In order to increase the applicability of the abductive reasoning method in such contexts, we would like to present in the scope of this paper an extension of the tableaux-based algorithm for dealing with concepts represented inALCQ, the description logic that extends ALN with full concept negation and quantified number restrictions.
Abstract: For the electrical metrics that describe photovoltaic
cell performance are inherently multivariate in nature, use of a
univariate, or one variable, statistical process control chart can have
important limitations. Development of a comprehensive process
control strategy is known to be significantly beneficial to reducing
process variability that ultimately drives up the manufacturing cost
photovoltaic cells. The multivariate moving average or MMA chart,
is applied to the electrical metrics of photovoltaic cells to illustrate
the improved sensitivity on process variability this method of control
charting offers. The result show the ability of the MMA chart to
expand to as any variables as needed, suggests an application
with multiple photovoltaic electrical metrics being used in
concert to determine the processes state of control.
Abstract: We describe a novel method for removing noise (in wavelet domain) of unknown variance from microarrays. The method is based on a smoothing of the coefficients of the highest subbands. Specifically, we decompose the noisy microarray into wavelet subbands, apply smoothing within each highest subband, and reconstruct a microarray from the modified wavelet coefficients. This process is applied a single time, and exclusively to the first level of decomposition, i.e., in most of the cases, it is not necessary a multirresoltuion analysis. Denoising results compare favorably to the most of methods in use at the moment.
Abstract: This paper describes technological possibilities to
enhance methane productionin the anaerobic stabilization of wastewater treatment plant excess sludge. This objective can be achieved by the addition of waste residues: crude glycerol from biodiesel production and residues from fishery. The addition
ofglycerol in an amount by weight of 2 – 5% causes enhancement of methane production of about 250 – 400%. At the same time the
percentage increase of total solids concentration in the outgoing sludge is ten or more times less. The containment of methane in
biogas is higher in case of admixed substrate.
Abstract: Hearing impairment is the number one chronic
disability affecting many people in the world. Background noise is
particularly damaging to speech intelligibility for people with
hearing loss especially for sensorineural loss patients. Several
investigations on speech intelligibility have demonstrated
sensorineural loss patients need 5-15 dB higher SNR than the normal
hearing subjects. This paper describes Discrete Hartley Transform
Power Normalized Least Mean Square algorithm (DHT-LMS) to
improve the SNR and to reduce the convergence rate of the Least
Means Square (LMS) for sensorineural loss patients. The DHT
transforms n real numbers to n real numbers, and has the convenient
property of being its own inverse. It can be effectively used for noise
cancellation with less convergence time. The simulated result shows
the superior characteristics by improving the SNR at least 9 dB for
input SNR with zero dB and faster convergence rate (eigenvalue ratio
12) compare to time domain method and DFT-LMS.
Abstract: The use of the mechanical simulation (in particular the finite element analysis) requires the management of assumptions in order to analyse a real complex system. In finite element analysis (FEA), two modeling steps require assumptions to be able to carry out the computations and to obtain some results: the building of the physical model and the building of the simulation model. The simplification assumptions made on the analysed system in these two steps can generate two kinds of errors: the physical modeling errors (mathematical model, domain simplifications, materials properties, boundary conditions and loads) and the mesh discretization errors. This paper proposes a mesh adaptive method based on the use of an h-adaptive scheme in combination with an error estimator in order to choose the mesh of the simulation model. This method allows us to choose the mesh of the simulation model in order to control the cost and the quality of the finite element analysis.
Abstract: We consider a Principal-Agent model with the
Principal being a seller who does not know perfectly how much the
buyer (the Agent) is willing to pay for the good. The buyer-s
preferences are hence his private information. The model corresponds
to the nonlinear pricing problem of Maskin and Riley. We assume
there are three types of Agents. The model is solved using
“informational rents" as variables. In the last section we present the
main characteristics of the optimal contracts in asymmetric
information and some possible extensions of the model.
Abstract: The use of renewable energy sources incl. biogas has become topical in accordance with the increasing demand for energy, decrease of fossil energy resources and the efforts to reduce greenhouse gas emissions as well as to increase energy independence from the territories where fossil energy resources are available.
As the technologies of biogas production from agricultural biomass develop, risk assessment and risk management become necessary for farms producing such a renewable energy. The need for risk assessments has become particularly topical when discussions on changing the biogas policy in the EU take place, which may influence the development of the sector in the future, as well as the operation of existing biogas facilities and their income level.
The current article describes results of the risk assessment for farms producing biomass from agriculture biomass in Latvia, the risk assessment system included 24 risks, that affect the whole biogas production process and the obtained results showed the high significance of political and production risks.
Abstract: Information and communication service providers
(ICSP) that are significant in size and provide Internet-based services
take administrative, technical, and physical protection measures via
the information security check service (ISCS). These protection
measures are the minimum action necessary to secure the stability and
continuity of the information and communication services (ICS) that
they provide. Thus, information assets are essential to providing ICS,
and deciding the relative importance of target assets for protection is a
critical procedure. The risk analysis model designed to decide the
relative importance of information assets, which is described in this
study, evaluates information assets from many angles, in order to
choose which ones should be given priority when it comes to
protection. Many-sided risk analysis (MSRS) grades the importance of
information assets, based on evaluation of major security check items,
evaluation of the dependency on the information and communication
facility (ICF) and influence on potential incidents, and evaluation of
major items according to their service classification, in order to
identify the ISCS target. MSRS could be an efficient risk analysis
model to help ICSPs to identify their core information assets and take
information protection measures first, so that stability of the ICS can
be ensured.
Abstract: In order to derive important parameters concerning
mobile subscriber MS with ongoing calls in Low Earth Orbit Mobile
Satellite Systems LEO MSSs, a positioning system had to be
integrated into MSS in order to localize mobile subscribers MSs and
track them during the connection. Such integration is regarded as a
complex implementation.
We propose in this paper a novel method based on advantages of
mobility model of Low Earth Orbit Mobile Satellite System LEO
MSS called Evaluation Parameters Method EPM which allows for
such systems the evaluation of different information concerning a
MS with a call in progress even if its location is unknown.
Abstract: This paper reports a new approach on identifying the
individuality of persons by using parametric classification of multiple
mental thoughts. In the approach, electroencephalogram (EEG)
signals were recorded when the subjects were thinking of one or
more (up to five) mental thoughts. Autoregressive features were
computed from these EEG signals and classified by Linear
Discriminant classifier. The results here indicate that near perfect
identification of 400 test EEG patterns from four subjects was
possible, thereby opening up a new avenue in biometrics.
Abstract: Symbolic Circuit Analysis (SCA) is a technique used
to generate the symbolic expression of a network. It has become a
well-established technique in circuit analysis and design. The
symbolic expression of networks offers excellent way to perform
frequency response analysis, sensitivity computation, stability
measurements, performance optimization, and fault diagnosis. Many
approaches have been proposed in the area of SCA offering different
features and capabilities. Numerical Interpolation methods are very
common in this context, especially by using the Fast Fourier
Transform (FFT). The aim of this paper is to present a method for
SCA that depends on the use of Wavelet Transform (WT) as a
mathematical tool to generate the symbolic expression for large
circuits with minimizing the analysis time by reducing the number of
computations.
Abstract: Solar shading designs are important for reduction of building energy consumption and improvement of indoor thermal environment. This paper carried out a number of building simulations for evaluation of the energy performance of different shading devices based on incremental costs. The results show that movable shading devices lower incremental costs by up to 50% compared with fixed ones for the same building energy efficiency for residential buildings, and wing panel shadings are much more suitable in commercial buildings than baring screen ones and overhangs for commercial buildings.