Abstract: Personnel protection devices are cardinal in safety hazard applications. They are widely used in home, office and in industry environments to reduce the risk of lethal shock to human being and equipment safety. This paper briefly reviews various personnel protection devices also describes the basic working principle of conventional ground fault circuit interrupter (GFCI) or ground fault isolator (GFI), its disadvantages and ways to overcome the disadvantages with solid-state relay (SSR) based GFI with ultrafast response up on fault implemented in printed circuit board. This solid state GFI comprises discrete MOSFET based alternating current (AC) switches, linear optical amplifier, photovoltaic isolator and sense resistor. In conventional GFI, current transformer is employed as a sensing element to detect the difference in current flow between live and neutral conductor. If there is no fault in equipment powered through GFI, due to insulation failure of internal wires and windings of motors, both live and neutral currents will be equal in magnitude and opposite in phase.
Abstract: This paper describes a concept of stereotype student
model in adaptive knowledge acquisition e-learning system. Defined
knowledge stereotypes are based on student's proficiency level and
on Bloom's knowledge taxonomy. The teacher module is responsible
for the whole adaptivity process: the automatic generation of
courseware elements, their dynamic selection and sorting, as well as
their adaptive presentation using templates for statements and
questions. The adaptation of courseware is realized according to
student-s knowledge stereotype.
Abstract: We suggest a novel method to incorporate longterm
redundancy (LTR) in signal time domain compression
methods. The proposition is based on block-sorting and curve
simplification. The proposition is illustrated on the ECG
signal as a post-processor for the FAN method. Test
applications on the new so-obtained FAN+ method using the
MIT-BIH database show substantial improvement of the
compression ratio-distortion behavior for a higher quality
reconstructed signal.
Abstract: Medical image registration is the key technology in image guided radiation therapy (IGRT) systems. On the basis of the previous work on our IGRT prototype with a biorthogonal x-ray imaging system, we described a method focused on the 2D/2D rigid-body registration using multiresolution pyramid based mutual information in this paper. Three key steps were involved in the method ： firstly, four 2D images were obtained including two x-ray projection images and two digital reconstructed radiographies（DRRs ） as the input for the registration ； Secondly, each pair of the corresponding x-ray image and DRR image were matched using multiresolution pyramid based mutual information under the ITK registration framework ； Thirdly, we got the final couch offset through a coordinate transformation by calculating the translations acquired from the two pairs of the images. A simulation example of a parotid gland tumor case and a clinical example of an anthropomorphic head phantom were employed in the verification tests. In addition, the influence of different CT slice thickness were tested. The simulation results showed that the positioning errors were 0.068±0.070, 0.072±0.098, 0.154±0.176mm along three axes which were lateral, longitudinal and vertical. The clinical test indicated that the positioning errors of the planned isocenter were 0.066, 0.07, 2.06mm on average with a CT slice thickness of 2.5mm. It can be concluded that our method with its verified accuracy and robustness can be effectively used in IGRT systems for patient setup.
Abstract: In this paper, the effect of addition the dune sand powder (DSP) on development of compressive strength and hydration of cement pastes was investigated as a function of water/binder ratio, was varied, on the one hand, the percentage of DSP and on the other, the fineness of DSP. In order to understand better the pozzolanic effect of dune sand powder in cement pastes, we followed the mixtures hydration (50% Pure Lime + 50% DSP) by X-ray diffraction. These mixtures the pastes present a hydraulic setting which is due to the formation of a C-S-H phase (calcium silicate hydrate). The latter is semi-crystallized. This study is a simplified approach to that of the mixtures (80% ordinary Portland cement + 20% DSP), in which the main reaction is the fixing of the lime coming from the cement hydration in the presence of DSP, to form calcium silicate hydrate semi-crystallized of second generation. The results proved that up to (20% DSP) as Portland cement replacement could be used with a fineness of 4000 cm²/g without affecting adversely the compressive strength. After 28 days, the compressive strength at 5, 10 and 15% DSP is superior to Portland cement, with an optimum effect for a percentage of the order of 5% to 10% irrespective of the w/b ratio and fineness of DSP.
Abstract: Insulation used in transformer is mostly oil pressboard insulation. Insulation failure is one of the major causes of catastrophic failure of transformers. It is established that partial discharges (PD) cause insulation degradation and premature failure of insulation. Online monitoring of PDs can reduce the risk of catastrophic failure of transformers. There are different techniques of partial discharge measurement like, electrical, optical, acoustic, opto-acoustic and ultra high frequency (UHF). Being non invasive and non interference prone, acoustic emission technique is advantageous for online PD measurement. Acoustic detection of p.d. is based on the retrieval and analysis of mechanical or pressure signals produced by partial discharges. Partial discharges are classified according to the origin of discharges. Their effects on insulation deterioration are different for different types. This paper reports experimental results and analysis for classification of partial discharges using acoustic emission signal of laboratory simulated partial discharges in oil pressboard insulation system using three different electrode systems. Acoustic emission signal produced by PD are detected by sensors mounted on the experimental tank surface, stored on an oscilloscope and fed to computer for further analysis. The measured AE signals are analyzed using discrete wavelet transform analysis and wavelet packet analysis. Energy distribution in different frequency bands of discrete wavelet decomposed signal and wavelet packet decomposed signal is calculated. These analyses show a distinct feature useful for PD classification. Wavelet packet analysis can sort out any misclassification arising out of DWT in most cases.
Abstract: Cardiac pulse-related artifacts in the EEG recorded
simultaneously with fMRI are complex and highly variable. Their
effective removal is an unsolved problem. Our aim is to develop an
adaptive removal algorithm based on the matching pursuit (MP)
technique and to compare it to established methods using a visual
evoked potential (VEP). We recorded the VEP inside the static
magnetic field of an MR scanner (with artifacts) as well as in an
electrically shielded room (artifact free). The MP-based artifact
removal outperformed average artifact subtraction (AAS) and
optimal basis set removal (OBS) in terms of restoring the EEG field
map topography of the VEP. Subsequently, a dipole model was fitted
to the VEP under each condition using a realistic boundary element
head model. The source location of the VEP recorded inside the MR
scanner was closest to that of the artifact free VEP after cleaning
with the MP-based algorithm as well as with AAS. While none of the
tested algorithms offered complete removal, MP showed promising
results due to its ability to adapt to variations of latency, frequency
and amplitude of individual artifact occurrences while still utilizing a
common template.
Abstract: Thermodynamics characterization Sesame oil
extraction by Acetone, Hexane and Benzene has been evaluated. The
120 hours experimental Data were described by a simple
mathematical model. According to the simulation results and the
essential criteria, Acetone is superior to other solvents but under
certain conditions where oil extraction takes place Hexane is superior
catalyst.
Abstract: Alcohol and water extracts of Cymbopogon citratus
was investigated for anti-bacterial properties and phytochemical
constituents. The extract was screened against four gram-negative
bacteria Escherichia coli, Klebsiella pneumoniae, Pseudomonas
aeruginosa, Proteus vulgaris) and two grampositive bacteria Bacillus
subtilis and Staphylococcus aureus at four different concentrations
(1:1, 1:5, 1:10 and 1:20) using disc diffusion method. The antibacterial
examination was by disc diffusion techniques, while the
photochemical constituents were investigated using standard
chemical methods. Results showed that the extracts inhibited the
growth of standard and local strains of the organisms used. The
treatments were significantly different (P = 0.05). The minimum
inhibitory concentration of the extracts against the tested
microorganisms ranged between 150mg/ml and 50mg/ml. The
alcohol extracts were found to be generally more effective than the
water extract. The photochemical analysis revealed the presence of
alkaloids and phenol but absence of cardiac and cyanogenic
glycosides. The presence of alkaloid and phenols were inferred as
being responsible for the anti-bacterial properties of the extracts.
Abstract: The steady mixed convection boundary layer flow from
a vertical cone in a porous medium filled with a nanofluid is
numerically investigated using different types of nanoparticles as Cu
(copper), Al2O3 (alumina) and TiO2 (titania). The boundary value
problem is solved by using the shooting technique by reducing it
into an ordinary differential equation. Results of interest for the local
Nusselt number with various values of the constant mixed convection
parameter and nanoparticle volume fraction parameter are evaluated.
It is found that dual solutions exist for a certain range of mixed
convection parameter.
Abstract: Software project effort estimation is frequently seen
as complex and expensive for individual software engineers.
Software production is in a crisis. It suffers from excessive costs.
Software production is often out of control. It has been suggested that
software production is out of control because we do not measure.
You cannot control what you cannot measure. During last decade, a
number of researches on cost estimation have been conducted. The
metric-set selection has a vital role in software cost estimation
studies; its importance has been ignored especially in neural network
based studies. In this study we have explored the reasons of those
disappointing results and implemented different neural network
models using augmented new metrics. The results obtained are
compared with previous studies using traditional metrics. To be able
to make comparisons, two types of data have been used. The first
part of the data is taken from the Constructive Cost Model
(COCOMO'81) which is commonly used in previous studies and the
second part is collected according to new metrics in a leading
international company in Turkey. The accuracy of the selected
metrics and the data samples are verified using statistical techniques.
The model presented here is based on Multi-Layer Perceptron
(MLP). Another difficulty associated with the cost estimation studies
is the fact that the data collection requires time and care. To make a
more thorough use of the samples collected, k-fold, cross validation
method is also implemented. It is concluded that, as long as an
accurate and quantifiable set of metrics are defined and measured
correctly, neural networks can be applied in software cost estimation
studies with success
Abstract: On the basis of the linearized Phillips-Herffron model of a single-machine power system, a novel method for designing unified power flow controller (UPFC) based output feedback controller is presented. The design problem of output feedback controller for UPFC is formulated as an optimization problem according to with the time domain-based objective function which is solved by iteration particle swarm optimization (IPSO) that has a strong ability to find the most optimistic results. To ensure the robustness of the proposed damping controller, the design process takes into account a wide range of operating conditions and system configurations. The simulation results prove the effectiveness and robustness of the proposed method in terms of a high performance power system. The simulation study shows that the designed controller by Iteration PSO performs better than Classical PSO in finding the solution.
Abstract: The security of their network remains the priorities of almost all companies. Existing security systems have shown their limit; thus a new type of security systems was born: honeypots. Honeypots are defined as programs or intended servers which have to attract pirates to study theirs behaviours. It is in this context that the leurre.com project of gathering about twenty platforms was born. This article aims to specify a model of honeypots attack. Our model describes, on a given platform, the evolution of attacks according to theirs hours. Afterward, we show the most attacked services by the studies of attacks on the various ports. It is advisable to note that this article was elaborated within the framework of the research projects on honeyspots within the LABTIC (Laboratory of Information Technologies and Communication).
Abstract: In this paper we present a novel approach for face image coding. The proposed method makes a use of the features of video encoders like motion prediction. At first encoder selects appropriate prototype from the database and warps it according to features of encoding face. Warped prototype is placed as first I frame. Encoding face is placed as second frame as P frame type. Information about features positions, color change, selected prototype and data flow of P frame will be sent to decoder. The condition is both encoder and decoder own the same database of prototypes. We have run experiment with H.264 video encoder and obtained results were compared to results achieved by JPEG and JPEG2000. Obtained results show that our approach is able to achieve 3 times lower bitrate and two times higher PSNR in comparison with JPEG. According to comparison with JPEG2000 the bitrate was very similar, but subjective quality achieved by proposed method is better.
Abstract: Trace element speciation of an integrated soil
amendment matrix was studied with a modified BCR sequential
extraction procedure. The analysis included pseudo-total
concentration determinations according to USEPA 3051A and
relevant physicochemical properties by standardized methods. Based
on the results, the soil amendment matrix possessed neutralization
capacity comparable to commercial fertilizers. Additionally, the
pseudo-total concentrations of all trace elements included in the
Finnish regulation for agricultural fertilizers were lower than the
respective statutory limit values. According to chemical speciation,
the lability of trace elements increased in the following order: Hg <
Cr < Co < Cu < As < Zn < Ni < Pb < Cd < V < Mo < Ba. The
validity of the BCR approach as a tool for chemical speciation was
confirmed by the additional acid digestion phase. Recovery of trace
elements during the procedure assured the validity of the approach
and indicated good quality of the analytical work.
Abstract: A numerical analysis used to simulate the effects of wavy surfaces and thermal radiation on natural convection heat transfer boundary layer flow over an inclined wavy plate has been investigated. A simple coordinate transformation is employed to transform the complex wavy surface into a flat plate. The boundary layer equations and the boundary conditions are discretized by the finite difference scheme and solved numerically using the Gauss-Seidel algorithm with relaxation coefficient. Effects of the wavy geometry, the inclination angle of the wavy plate and the thermal radiation on the velocity profiles, temperature profiles and the local Nusselt number are presented and discussed in detail.
Abstract: In this paper we proposed comparison of four content based objective metrics with results of subjective tests from 80 video sequences. We also include two objective metrics VQM and SSIM to our comparison to serve as “reference” objective metrics because their pros and cons have already been published. Each of the video sequence was preprocessed by the region recognition algorithm and then the particular objective video quality metric were calculated i.e. mutual information, angular distance, moment of angle and normalized cross-correlation measure. The Pearson coefficient was calculated to express metrics relationship to accuracy of the model and the Spearman rank order correlation coefficient to represent the metrics relationship to monotonicity. The results show that model with the mutual information as objective metric provides best result and it is suitable for evaluating quality of video sequences.
Abstract: In this paper, an experimentation to enhance the
visibility of hot objects in a thermal image acquired with ordinary
digital camera is reported, after the applications of lowpass and
median filters to suppress the distracting granular noises. The
common thresholding and slicing techniques were used on the
histogram at different gray levels, followed by a subjective
comparative evaluation. The best result came out with the threshold
level 115 and the number of slices 3.
Abstract: Due to a high unemployment rate among local people
and a high reliance on expatriate workers, the governments in the
Gulf Co-operation Council (GCC) countries have been implementing
programmes of localisation (replacing foreign workers with GCC
nationals). These programmes have been successful in the public
sector but much less so in the private sector. However, there are now
insufficient jobs for locals in the public sector and the onus to provide
employment has fallen on the private sector. This paper is concerned
with a study, which is a work in progress (certain elements are
complete but not the whole study), investigating the effective
implementation of localisation policies in four- and five-star hotels in
the Kingdom of Saudi Arabia (KSA) and the United Arab Emirates
(UAE). The purpose of the paper is to identify the research gap, and
to present the need for the research. Further, it will explain how this
research was conducted.
Studies of localisation in the GCC countries are under-represented
in scholarly literature. Currently, the hotel sectors in KSA and UAE
play an important part in the countries’ economies. However, the
total proportion of Saudis working in the hotel sector in KSA is
slightly under 8%, and in the UAE, the hotel sector remains highly
reliant on expatriates. There is therefore a need for research on
strategies to enhance the implementation of the localisation policies
in general and in the hotel sector in particular.
Further, despite the importance of the hotel sector to their
economies, there remains a dearth of research into the
implementation of localisation policies in this sector. Indeed, as far as
the researchers are aware, there is no study examining localisation in
the hotel sector in KSA, and few in the UAE. This represents a
considerable research gap.
Regarding how the research was carried out, a multiple case study
strategy was used. The four- and five-star hotel sector in KSA is one
of the cases, while the four- and five-star hotel sector in the UAE is
the other case. Four- and five-star hotels in KSA and the UAE were
chosen as these countries have the longest established localisation
policies of all the GCC states and there are more hotels of these
classifications in these countries than in any of the other Gulf
countries. A literature review was carried out to underpin the
research. The empirical data were gathered in three phases. In order
to gain a pre-understanding of the issues pertaining to the research
context, Phase I involved eight unstructured interviews with officials
from the Saudi Commission for Tourism and Antiquities (three
interviewees); the Saudi Human Resources Development Fund (one);
the Abu Dhabi Tourism and Culture Authority (three); and the Abu
Dhabi Development Fund (one).
In Phase II, a questionnaire was administered to 24 managers and
24 employees in four- and five-star hotels in each country to obtain
their beliefs, attitudes, opinions, preferences and practices concerning
localisation.
Unstructured interviews were carried out in Phase III with six
managers in each country in order to allow them to express opinions
that may not have been explored in sufficient depth in the
questionnaire. The interviews in Phases I and III were analysed using
thematic analysis and SPSS will be used to analyse the questionnaire
data.
It is recommended that future research be undertaken on a larger
scale, with a larger sample taken from all over KSA and the UAE
rather than from only four cities (i.e., Riyadh and Jeddah in KSA and
Abu Dhabi and Sharjah in the UAE), as was the case in this research.
Abstract: Neonatal lupus erythematous (NLE) is a rare disease marked by clinical characteristic and specific maternal autoantibody. Many cutaneous, cardiac, liver, and hematological manifestations could happen with affect of one organ or multiple. In this case, both babies were premature, low birth weight (LBW), small for gestational age (SGA) and born through caesarean section from a systemic lupus erythematous (SLE) mother. In the first case, we found a baby girl with dyspnea and grunting. Chest X ray showed respiratory distress syndrome (RDS) great I and echocardiography showed small atrial septal defect (ASD) and ventricular septal defect (VSD). She also developed anemia, thrombocytopenia, elevated C-reactive protein, hypoalbuminemia, increasing coagulation factors, hyperbilirubinemia, and positive blood culture of Klebsiella pneumonia. Anti-Ro/SSA and Anti-nRNP/sm were positive. Intravenous fluid, antibiotic, transfusion of blood, thrombocyte concentrate, and fresh frozen plasma were given. The second baby, male presented with necrotic tissue on the left ear and skin rashes, erythematous macula, athropic scarring, hyperpigmentation on all of his body with various size and facial haemorrhage. He also suffered from thrombocytopenia, mild elevated transaminase enzyme, hyperbilirubinemia, anti-Ro/SSA was positive. Intravenous fluid, methyprednisolone, intravenous immunoglobulin (IVIG), blood, and thrombocyte concentrate transfution were given. Two cases of neonatal lupus erythematous had been presented. Diagnosis based on clinical presentation and maternal auto antibody on neonate. Organ involvement in NLE can occur as single or multiple manifestations.