Abstract: Compared to oil production from microorganisms, little work has been performed for mixed culture of microalgae and yeast. In this article it is aimed to show high oil accumulation potential of mixed culture of microalgae Chlorella sp. KKU-S2 and oleaginous yeast Torulaspora maleeae Y30 using sugarcane molasses as substrate. The monoculture of T. maleeae Y30 grew faster than that of microalgae Chlorella sp. KKU-S2. In monoculture of yeast, a biomass of 6.4g/L with specific growth rate (m) of 0.265 (1/d) and lipid yield of 0.466g/L were obtained, while 2.53g/L of biomass with m of 0.133 (1/d) and lipid yield of 0.132g/L were obtained for monoculture of Chlorella sp. KKU-S2. The biomass concentration in the mixed culture of T. maleeae Y30 with Chlorella sp. KKU-S2 increased faster and was higher compared with that in the monoculture and mixed culture of microalgae. In mixed culture of microalgae Chlorella sp. KKU-S2 and C. vulgaris TISTR8580, a biomass of 3.47g/L and lipid yield of 0.123 g/L were obtained. In mixed culture of T. maleeae Y30 with Chlorella sp. KKU-S2, a maximum biomass of 7.33 g/L and lipid yield of 0.808g/L were obtained. Maximum cell yield coefficient (YX/S, 0.229g/L), specific yield of lipid (YP/X, 0.11g lipid/g cells) and volumetric lipid production rate (QP, 0.115 g/L/d) were obtained in mixed culture of yeast and microalgae. Clearly, T. maleeae Y30 and Chlorella sp. KKU-S2 use sugarcane molasses as organic nutrients efficiently in mixed culture under mixotrophic growth. The biomass productivity and lipid yield are notably enhanced in comparison with monoculture.
Abstract: The shortest path routing problem is a multiobjective
nonlinear optimization problem with constraints. This problem has
been addressed by considering Quality of service parameters, delay
and cost objectives separately or as a weighted sum of both
objectives. Multiobjective evolutionary algorithms can find multiple
pareto-optimal solutions in one single run and this ability makes them
attractive for solving problems with multiple and conflicting
objectives. This paper uses an elitist multiobjective evolutionary
algorithm based on the Non-dominated Sorting Genetic Algorithm
(NSGA), for solving the dynamic shortest path routing problem in
computer networks. A priority-based encoding scheme is proposed
for population initialization. Elitism ensures that the best solution
does not deteriorate in the next generations. Results for a sample test
network have been presented to demonstrate the capabilities of the
proposed approach to generate well-distributed pareto-optimal
solutions of dynamic routing problem in one single run. The results
obtained by NSGA are compared with single objective weighting
factor method for which Genetic Algorithm (GA) was applied.
Abstract: The mechanical behavior of porous media is governed by the interaction between its solid skeleton and the fluid existing inside its pores. The interaction occurs through the interface of gains and fluid. The traditional analysis methods of porous media, based on the effective stress and Darcy's law, are unable to account for these interactions. For an accurate analysis, the porous media is represented in a fluid-filled porous solid on the basis of the Biot theory of wave propagation in poroelastic media. In Biot formulation, the equations of motion of the soil mixture are coupled with the global mass balance equations to describe the realistic behavior of porous media. Because of irregular geometry, the domain is generally treated as an assemblage of fmite elements. In this investigation, the numerical formulation for the field equations governing the dynamic response of fluid-saturated porous media is analyzed and employed for the study of transient wave motion. A finite element model is developed and implemented into a computer code called DYNAPM for dynamic analysis of porous media. The weighted residual method with 8-node elements is used for developing of a finite element model and the analysis is carried out in the time domain considering the dynamic excitation and gravity loading. Newmark time integration scheme is developed to solve the time-discretized equations which are an unconditionally stable implicit method Finally, some numerical examples are presented to show the accuracy and capability of developed model for a wide variety of behaviors of porous media.
Abstract: The growth of the aquaculture industry has been
associated with negative environmental impacts through the
discharge of raw effluents into the adjacent receiving water bodies.
Macrophytes from natural saline lakes, which have adaptability to the
high salinity, can be suitable for saline effluent treatment. Eight
emergent species from natural saline area were planted in an
experimental gravel bed hydroponic mesocosm (GBH) which was
treated with effluent water from an intensive fish farm using
geothermal water. In order to examine the applicability of the
halophytes in treatment processes, we tested the relative efficacy of
total nitrogen (TN), total phosphorus (TP), potassium (K), sodium
(Na), magnesium (Mg) and calcium (Ca) removal for the saline
wastewater treatment. Four of the eight species, which were
Phragmites australis, Typha angustifolia, Glyceria maxima, Scirpus
lacustris spp. tabernaemontani could survive and contribute the
experimental treatment.
Abstract: Traditional higher-education classrooms allow lecturers to observe students- behaviours and responses to a particular pedagogy during learning in a way that can influence changes to the pedagogical approach. Within current e-learning systems it is difficult to perform continuous analysis of the cohort-s behavioural tendency, making real-time pedagogical decisions difficult. This paper presents a Virtual Learning Process Environment (VLPE) based on the Business Process Management (BPM) conceptual framework. Within the VLPE, course designers can model various education pedagogies in the form of learning process workflows using an intuitive flow diagram interface. These diagrams are used to visually track the learning progresses of a cohort of students. This helps assess the effectiveness of the chosen pedagogy, providing the information required to improve course design. A case scenario of a cohort of students is presented and quantitative statistical analysis of their learning process performance is gathered and displayed in realtime using dashboards.
Abstract: Rice seed expression (cDNA) library in the Lambda
Zap 11® phage constructed from the developing grain 10-20 days
after flowering was transformed into yeast for functional
complementation assays in three salt sensitive yeast mutants S.
cerevisiae strain CY162, G19 and Axt3K. Transformed cells of G19
and Axt3K with pYES vector with cDNA inserts showed enhance
tolerance than those with empty pYes vector. Sequencing of the
cDNA inserts revealed that they encode for the putative proteins with
the sequence homologous to rice putative protein PROLM24
(Os06g31070), a prolamin precursor. Expression of this cDNA did
not affect yeast growth in absence of salt. Axt3k and G19 strains
expressing the PROLM24 were able to grow upto 400 mM and 600
mM of NaCl respectively. Similarly, Axt3k mutant with PROLM24
expression showed comparatively higher growth rate in the medium
with excess LiCl (50 mM). The observation that expression of
PROLM24 rescued the salt sensitive phenotypes of G19 and Axt3k
indicates the existence of a regulatory system that ameliorates the
effect of salt stress in the transformed yeast mutants. However, the
exact function of the cDNA sequence, which shows partial sequence
homology to yeast UTR1 is not clear. Although UTR1 involved in
ferrous uptake and iron homeostasis in yeast cells, there is no
evidence to prove its role in Na+ homeostasis in yeast cells. Absence
of transmembrane regions in Os06g31070 protein indicates that salt
tolerance is achieved not through the direct functional
complementation of the mutant genes but through an alternative
mechanism.
Abstract: This paper proposes a Particle Swarm Optimization
(PSO) based technique for the optimal allocation of Distributed
Generation (DG) units in the power systems. In this paper our aim is
to decide optimal number, type, size and location of DG units for
voltage profile improvement and power loss reduction in distribution
network. Two types of DGs are considered and the distribution load
flow is used to calculate exact loss. Load flow algorithm is combined
appropriately with PSO till access to acceptable results of this
operation. The suggested method is programmed under MATLAB
software. Test results indicate that PSO method can obtain better
results than the simple heuristic search method on the 30-bus and 33-
bus radial distribution systems. It can obtain maximum loss reduction
for each of two types of optimally placed multi-DGs. Moreover,
voltage profile improvement is achieved.
Abstract: This paper presents a conceptual model of agreement
options for negotiation support in multi-person decision on
optimizing high-rise building columns. The decision is complicated
since many parties involved in choosing a single alternative from a
set of solutions. There are different concern caused by differing
preferences, experiences, and background. Such building columns as
alternatives are referred to as agreement options which are
determined by identifying the possible decision maker group,
followed by determining the optimal solution for each group. The
group in this paper is based on three-decision makers preferences that
are designer, programmer, and construction manager. Decision
techniques applied to determine the relative value of the alternative
solutions for performing the function. Analytical Hierarchy Process
(AHP) was applied for decision process and game theory based agent
system for coalition formation. An n-person cooperative game is
represented by the set of all players. The proposed coalition
formation model enables each agent to select individually its allies or
coalition. It further emphasizes the importance of performance
evaluation in the design process and value-based decision.
Abstract: Discussion and development of principles of the
uniform nation formation within the limits of the Kazakhstan state
obviously became one of the most pressing questions of the day. The
fact that this question has not been solved "from above" as many
other questions has caused really brisk discussion, shows us increase
of civil consciousness in Kazakhstan society, and also the actuality of
this theme which can be carried in the category of fatal questions. In
any sense, nation building has raised civil society to a much higher
level. It would be better to begin with certain definitions. First is the
word "nation". The second is the "state". Both of these terms are very
closely connected with each other, so that in English language they
are in general synonyms. In Russian more shades of these terms
exist. For example in Kazakhstan the citizens of the country
irrespective of nationality (but mainly with reference to non-kazakhs)
are called «kazakhstanians», while the name of the title nation is
\"Kazakhs\". The same we can see in Russia, where, for example, the
Chechen or the Yakut –are \"Rossiyane\" which means “the citizens
of Russian Federation, but not \"Russians\".
The paper was written under the research project “Islam in modern
Kazakhstan: the nature and outcome of the religious revival”.
Abstract: Most of the real queuing systems include special properties and constraints, which can not be analyzed directly by using the results of solved classical queuing models. Lack of Markov chains features, unexponential patterns and service constraints, are the mentioned conditions. This paper represents an applied general algorithm for analysis and optimizing the queuing systems. The algorithm stages are described through a real case study. It is consisted of an almost completed non-Markov system with limited number of customers and capacities as well as lots of common exception of real queuing networks. Simulation is used for optimizing this system. So introduced stages over the following article include primary modeling, determining queuing system kinds, index defining, statistical analysis and goodness of fit test, validation of model and optimizing methods of system with simulation.
Abstract: Innovations in technology have created new ethical
challenges. Essential use of electronic communication in the
workplace has escalated at an astronomical rate over the past decade.
As such, legal and ethical dilemmas confronted by both the employer
and the employee concerning managerial control and ownership of einformation
have increased dramatically in the USA. From the
employer-s perspective, ownership and control of all information
created for the workplace is an undeniable source of economic
advantage and must be monitored zealously. From the perspective of
the employee, individual rights, such as privacy, freedom of speech,
and freedom from unreasonable search and seizure, continue to be
stalwart legal guarantees that employers are not legally or ethically
entitled to abridge in the workplace. These issues have been the
source of great debate and the catalyst for legal reform. The fine line
between ethical and legal has been complicated by emerging
technologies. This manuscript will identify and discuss a number of
specific legal and ethical issues raised by the dynamic electronic
workplace and conclude with suggestions that employers should
follow to respect the delicate balance between employees- legal
rights to privacy and the employer's right to protect its knowledge
systems and infrastructure.
Abstract: Mapping between local and global coordinates is an
important issue in finite element method, as all calculations are
performed in local coordinates. The concern arises when subparametric
are used, in which the shape functions of the field variable
and the geometry of the element are not the same. This is particularly
the case for C* elements in which the extra degrees of freedoms
added to the nodes make the elements sub-parametric. In the present
work, transformation matrix for C1* (an 8-noded hexahedron
element with 12 degrees of freedom at each node) is obtained using
equivalent C0 elements (with the same number of degrees of
freedom). The convergence rate of 8-noded C1* element is nearly
equal to its equivalent C0 element, while it consumes less CPU time
with respect to the C0 element. The existence of derivative degrees
of freedom at the nodes of C1* element along with excellent
convergence makes it superior compared with it equivalent C0
element.
Abstract: Following the research in the Department of environmental engineering in Faculty of mechanical engineering on Technical University of Kosice and experiences with electrocoagulation style of disposal waste water, there were designed and partly examining the equipment of two stage revitalization on the standing and little fusible water of tenet electrolysis on the little tarns. With the cooperation with vet experts was that manners prove and it is innocuous for animals, during which time cyanobacteria are totally paralyzed. For the implementation of science and research results have been obtained by means EU funds for structural development.
Abstract: Artificial Immune System is adopted as a Heuristic
Algorithm to solve the combinatorial problems for decades.
Nevertheless, many of these applications took advantage of the benefit
for applications but seldom proposed approaches for enhancing the
efficiency. In this paper, we continue the previous research to develop
a Self-evolving Artificial Immune System II via coordinating the T
and B cell in Immune System and built a block-based artificial
chromosome for speeding up the computation time and better
performance for different complexities of problems. Through the
design of Plasma cell and clonal selection which are relative the
function of the Immune Response. The Immune Response will help
the AIS have the global and local searching ability and preventing
trapped in local optima. From the experimental result, the significant
performance validates the SEAIS II is effective when solving the
permutation flows-hop problems.
Abstract: The paper relates to a catalyst, comprising copperchromium
spinel, coated on carrier γ-Al2O3. The effect of preparation
conditions on the active component composition and activity
behavior of the catalysts is discussed. It was found that the activity of
carbon monoxide, DME, formaldehyde and methanol oxidation
reaches a maximum at an active component content of 20 – 30 wt. %.
Temperature calcination at 500oC seems to be optimal for the γ–
alumina supported CuO-Cr2O3 catalysts for CO, DME, formaldehyde
and methanol oxidation. A three months industrial experiment was
carried out to elucidate the changes in the catalyst composition
during industrial exploitation of the catalyst and the main reasons for
catalyst deactivation.
It was concluded that the CuO–Cr2O3/γ–alumina supported
catalysts have enhanced activity toward CO, DME, formaldehyde
and methanol oxidation and that these catalysts are suitable for
industrial application. The main reason for catalyst deactivation
seems to be the deposition of iron and molybdenum, coming from the
main reactor, on the active component surface.
Abstract: Increase in globalization of capital markets brings the
higher requirements on financial information provided for investors
who look for a highly comparable information. Paper deals with the
advantages and limitations of applying International Financial
Reporting Standards (IFRS) in the Czech Republic and Ukraine. As a
greatest limit for full adoption of IFRS shall be acknowledged the
strong connection of continental accounting to tax system and
enormous high administrative burden for IFRS appliers.
Abstract: This study has investigated the antidiabetic and
antioxidant potential of Pseudovaria macrophylla bark extract on
streptozotocin–nicotinamide induced type 2 diabetic rats. LCMSQTOF
and NMR experiments were done to determine the chemical
composition in the methanolic bark extract. For in vivo experiments,
the STZ (60 mg/kg/b.w, 15 min after 120 mg/kg/1 nicotinamide, i.p.)
induced diabetic rats were treated with methanolic extract of
Pseuduvaria macrophylla (200 and 400 mg/kg·bw) and
glibenclamide (2.5 mg/kg) as positive control respectively.
Biochemical parameters were assayed in the blood samples of all
groups of rats. The pro-inflammatory cytokines, antioxidant status
and plasma transforming growth factor βeta-1 (TGF-β1) were
evaluated. The histological study of the pancreas was examined and
its expression level of insulin was observed by
immunohistochemistry. In addition, the expression of glucose
transporters (GLUT 1, 2 and 4) were assessed in pancreas tissue by
western blot analysis. The outcomes of the study displayed that the
bark methanol extract of Pseuduvaria macrophylla has potentially
normalized the elevated blood glucose levels and improved serum
insulin and C-peptide levels with significant increase in the
antioxidant enzyme, reduced glutathione (GSH) and decrease in the
level of lipid peroxidation (LPO). Additionally, the extract has
markedly decreased the levels of serum pro-inflammatory cytokines
and transforming growth factor beta-1 (TGF-β1). Histopathology
analysis demonstrated that Pseuduvaria macrophylla has the
potential to protect the pancreas of diabetic rats against peroxidation
damage by downregulating oxidative stress and elevated
hyperglycaemia. Furthermore, the expression of insulin protein,
GLUT-1, GLUT-2 and GLUT-4 in pancreatic cells was enhanced.
The findings of this study support the anti-diabetic claims of
Pseudovaria macrophylla bark.
Abstract: In this paper, we introduce an e-collaborative learning circles methodology which utilizes the information and communication technologies (ICTs) in e-educational processes. In e-collaborative learning circles methodology, the teachers and students announce their research projects on various mailing lists and discussion boards using available ICTs. The teachers & moderators and students who are already members of the e-forums, discuss the project proposals in their classrooms sent out by the potential global partner schools and return the requested feed back to the proposing school(s) about their level of the participation and contribution in the research. In general, an e-collaborative learning circle project is implemented with a small and diverse group (usually 8-10 participants) from around the world. The students meet regularly over a period of weeks/months through the ICTs during the ecollaborative learning process. When the project is completed, a project product (e-book / DVD) is prepared and sent to the circle members. In this research, when taking into account the interests and motivation of the participating students with the facilitating role of the teacher(s), the students in each circle do research to obtain new data and information, thus enabling them to have the opportunity to meet both different cultures and international understandings across the globe. However, while the participants communicate along with the members in the circle they also practice and develop their communication language skills. Finally, teachers and students find the possibility to develop their skills in using the ICTs as well.
Abstract: In this paper, a alternative structure method for
continuous time sigma delta modulator is presented. In this
modulator for implementation of integrators in loop filter second
generation current conveyors are employed. The modulator is
designed in CMOS technology and features low power consumption
(65db),
and with 180khZ bandwidth. Simulation results confirm that this
design is suitable for data converters.
Abstract: The purpose of this study was to present a reliable mean for human-computer interfacing based on finger gestures made in two dimensions, which could be interpreted and adequately used in controlling a remote robot's movement. The gestures were captured and interpreted using an algorithm based on trigonometric functions, in calculating the angular displacement from one point of touch to another as the user-s finger moved within a time interval; thereby allowing for pattern spotting of the captured gesture. In this paper the design and implementation of such a gesture based user interface was presented, utilizing the aforementioned algorithm. These techniques were then used to control a remote mobile robot's movement. A resistive touch screen was selected as the gesture sensor, then utilizing a programmed microcontroller to interpret them respectively.