Abstract: The aim of this paper is to adopt a compromise ratio (CR) methodology for fuzzy multi-attribute single-expert decision making proble. In this paper, the rating of each alternative has been described by linguistic terms, which can be expressed as triangular fuzzy numbers. The compromise ratio method for fuzzy multi-attribute single expert decision making has been considered here by taking the ranking index based on the concept that the chosen alternative should be as close as possible to the ideal solution and as far away as possible from the negative-ideal solution simultaneously. From logical point of view, the distance between two triangular fuzzy numbers also is a fuzzy number, not a crisp value. Therefore a fuzzy distance measure, which is itself a fuzzy number, has been used here to calculate the difference between two triangular fuzzy numbers. Now in this paper, with the help of this fuzzy distance measure, it has been shown that the compromise ratio is a fuzzy number and this eases the problem of the decision maker to take the decision. The computation principle and the procedure of the compromise ratio method have been described in detail in this paper. A comparative analysis of the compromise ratio method previously proposed [1] and the newly adopted method have been illustrated with two numerical examples.
Abstract: This purpose of this paper is to develop and validate a
model to accurately predict the cell temperature of a PV module that
adapts to various mounting configurations, mounting locations, and
climates while only requiring readily available data from the module
manufacturer. Results from this model are also compared to results
from published cell temperature models. The models were used to
predict real-time performance from a PV water pumping systems in
the desert of Medenine, south of Tunisia using 60-min intervals of
measured performance data during one complete year. Statistical
analysis of the predicted results and measured data highlight possible
sources of errors and the limitations and/or adequacy of existing
models, to describe the temperature and efficiency of PV-cells and
consequently, the accuracy of performance of PV water pumping
systems prediction models.
Abstract: This Classifying Bird Sounds (chip notes) project-s
purpose is to reduce the unwanted noise from recorded bird sound
chip notes, design a scheme to detect differences and similarities
between recorded chip notes, and classify bird sound chip notes. The
technologies of determining the similarities of sound waves have
been used in communication, sound engineering and wireless sound
applications for many years. Our research is focused on the similarity
of chip notes, which are the sounds from different birds. The program
we use is generated by Microsoft Cµ.
Abstract: Results of Chilean wine classification based on the
information provided by an electronic nose are reported in this paper.
The classification scheme consists of two parts; in the first stage,
Principal Component Analysis is used as feature extraction method to
reduce the dimensionality of the original information. Then, Radial
Basis Functions Neural Networks is used as pattern recognition
technique to perform the classification. The objective of this study is
to classify different Cabernet Sauvignon, Merlot and Carménère wine
samples from different years, valleys and vineyards of Chile.
Abstract: The aim of this study was to investigate the
environmental conservation behavior of the Applied Health Science
students of Suranaree University of Technology, a green and clean
university. The sample group was 184 Applied Health Science
students (medical, nursing, and public health). A questionnaire was
used to collect information.
The result of the study found that the students had more negative
than positive behaviors towards energy, water, and forest
conservation. This result can be used as basic information for
designing long-term behavior modification activities or research
projects on environmental conservation. Thus Applied Health
Science students will be encouraged to be conscious and also be a
good example of environmental conservation behavior.
Abstract: This study reports the implementation of Good
Manufacturing Practice (GMP) in a polycarbonate film processing
plant. The implementation of GMP took place with the creation of a
multidisciplinary team. It was carried out in four steps: conduct gap
assessment, create gap closure plan, close gaps, and follow up the
GMP implementation. The basis for the gap assessment is the
guideline for GMP for plastic materials and articles intended for Food
Contact Material (FCM), which was edited by Plastic Europe. The
effective results of the GMP implementation in this study showed
100% completion of gap assessment. The key success factors for
implementing GMP in production process are the commitment,
intention and support of top management.
Abstract: These days people love to travel around the world.
Regardless of their location and time, they especially Muslims still
need to perform their prayers. Normally for travelers, they need to
bring maps, compass and for Muslim, they even have to bring Qibla
pointer when they travel. It is slightly difficult to determine the Qibla
direction and to know the time for each prayer. As the technology
grows, many PDA equip with maps and GPS to locate their location.
In this paper we present a new electronic device called Mobile Qibla
and Prayer Time Finder to locate the Qibla direction and to
determine each prayer time based on the current user-s location using
PDA. This device use PIC microcontroller equipped with digital
compass where it will communicate with PDA using Bluetooth
technology and display the exact Qibla direction and prayer time
automatically at any place in the world. This device is reliable and
accurate in determining the Qibla direction and prayer time.
Abstract: Previous the 3D model texture generation from multi-view images and mapping algorithms has issues in the texture chart generation which are the self-intersection and the concentration of the texture in texture space. Also we may suffer from some problems due to the occluded areas, such as inside parts of thighs. In this paper we propose a texture mapping technique for 3D models using multi-view images on the GPU. We do texture mapping directly on the GPU fragment shader per pixel without generation of the texture map. And we solve for the occluded area using the 3D model depth information. Our method needs more calculation on the GPU than previous works, but it has shown real-time performance and previously mentioned problems do not occur.
Abstract: The present study was designed to investigate the
cardio protective role of chronic oral administration of alcoholic
extract of Terminalia arjuna in in-vivo ischemic reperfusion injury
and the induction of HSP72. Rabbits, divided into three groups, and
were administered with the alcoholic extract of the bark powder of
Terminalia arjuna (TAAE) by oral gavage [6.75mg/kg: (T1) and
9.75mg/kg: (T2), 6 days /week for 12 weeks]. In open-chest
Ketamine pentobarbitone anaesthetized rabbits, the left anterior
descending coronary artery was occluded for 15 min of ischemia
followed by 60 min of reperfusion. In the vehicle-treated group,
ischemic-reperfusion injury (IRI) was evidenced by depression of
global hemodynamic function (MAP, HR, LVEDP, peak LV (+) & (-
) (dP/dt) along with depletion of HEP compounds. Oxidative stress
in IRI was evidenced by, raised levels of myocardial TBARS and
depletion of endogenous myocardial antioxidants GSH, SOD and
catalase. Western blot analysis showed a single band corresponding
to 72 kDa in homogenates of hearts from rabbits treated with both the
doses. In the alcoholic extract of the bark powder of Terminalia
arjuna treatment groups, both the doses had better recovery of
myocardial hemodynamic function, with significant reduction in
TBARS, and rise in SOD, GSH, catalase were observed. The results
of the present study suggest that the alcoholic extract of the bark
powder of Terminalia arjuna in rabbit induces myocardial HSP 72
and augments myocardial endogenous antioxidants, without causing
any cellular injury and offered better cardioprotection against
oxidative stress associated with myocardial IR injury.
Abstract: A key to success of high quality software development
is to define valid and feasible requirements specification. We have
proposed a method of model-driven requirements analysis using
Unified Modeling Language (UML). The main feature of our method
is to automatically generate a Web user interface mock-up from UML
requirements analysis model so that we can confirm validity of
input/output data for each page and page transition on the system by
directly operating the mock-up. This paper proposes a support method
to check the validity of a data life cycle by using a model checking tool
“UPPAAL" focusing on CRUD (Create, Read, Update and Delete).
Exhaustive checking improves the quality of requirements analysis
model which are validated by the customers through automatically
generated mock-up. The effectiveness of our method is discussed by a
case study of requirements modeling of two small projects which are a
library management system and a supportive sales system for text
books in a university.
Abstract: In ad hoc networks, the main issue about designing of protocols is quality of service, so that in wireless sensor networks the main constraint in designing protocols is limited energy of sensors. In fact, protocols which minimize the power consumption in sensors are more considered in wireless sensor networks. One approach of reducing energy consumption in wireless sensor networks is to reduce the number of packages that are transmitted in network. The technique of collecting data that combines related data and prevent transmission of additional packages in network can be effective in the reducing of transmitted packages- number. According to this fact that information processing consumes less power than information transmitting, Data Aggregation has great importance and because of this fact this technique is used in many protocols [5]. One of the Data Aggregation techniques is to use Data Aggregation tree. But finding one optimum Data Aggregation tree to collect data in networks with one sink is a NP-hard problem. In the Data Aggregation technique, related information packages are combined in intermediate nodes and form one package. So the number of packages which are transmitted in network reduces and therefore, less energy will be consumed that at last results in improvement of longevity of network. Heuristic methods are used in order to solve the NP-hard problem that one of these optimization methods is to solve Simulated Annealing problems. In this article, we will propose new method in order to build data collection tree in wireless sensor networks by using Simulated Annealing algorithm and we will evaluate its efficiency whit Genetic Algorithm.
Abstract: This paper considers the effect of heat generation
proportional l to (T - T∞ )p , where T is the local temperature and T∞
is the ambient temperature, in unsteady free convection flow near the
stagnation point region of a three-dimensional body. The fluid is
considered in an ambient fluid under the assumption of a step change
in the surface temperature of the body. The non-linear coupled partial
differential equations governing the free convection flow are solved
numerically using an implicit finite-difference method for different
values of the governing parameters entering these equations. The
results for the flow and heat characteristics when p ≤ 2 show that
the transition from the initial unsteady-state flow to the final steadystate
flow takes place smoothly. The behavior of the flow is seen
strongly depend on the exponent p.
Abstract: Researchers have been applying tional intelligence (AI/CI) methods to computer games. In this research field, further researchesare required to compare AI/CI
methods with respect to each game application. In th
our experimental result on the comparison of three evolutionary algorithms – evolution strategy, genetic algorithm, and their hybrid
applied to evolving controller agents for the CIG 2007 Simulated Car Racing competition. Our experimental result shows that, premature
convergence of solutions was observed in the case of ES, and GA outperformed ES in the last half of generations. Besides, a hybrid
which uses GA first and ES next evolved the best solution among the whole solutions being generated. This result shows the ability of GA in
globally searching promising areas in the early stage and the ability of ES in locally searching the focused area (fine-tuning solutions).
Abstract: Nevertheless the widespread application of finite
mixture models in segmentation, finite mixture model selection is
still an important issue. In fact, the selection of an adequate number
of segments is a key issue in deriving latent segments structures and
it is desirable that the selection criteria used for this end are effective.
In order to select among several information criteria, which may
support the selection of the correct number of segments we conduct a
simulation study. In particular, this study is intended to determine
which information criteria are more appropriate for mixture model
selection when considering data sets with only categorical
segmentation base variables. The generation of mixtures of
multinomial data supports the proposed analysis. As a result, we
establish a relationship between the level of measurement of
segmentation variables and some (eleven) information criteria-s
performance. The criterion AIC3 shows better performance (it
indicates the correct number of the simulated segments- structure
more often) when referring to mixtures of multinomial segmentation
base variables.
Abstract: Image Compression using Artificial Neural Networks
is a topic where research is being carried out in various directions
towards achieving a generalized and economical network.
Feedforward Networks using Back propagation Algorithm adopting
the method of steepest descent for error minimization is popular and
widely adopted and is directly applied to image compression.
Various research works are directed towards achieving quick
convergence of the network without loss of quality of the restored
image. In general the images used for compression are of different
types like dark image, high intensity image etc. When these images
are compressed using Back-propagation Network, it takes longer
time to converge. The reason for this is, the given image may
contain a number of distinct gray levels with narrow difference with
their neighborhood pixels. If the gray levels of the pixels in an image
and their neighbors are mapped in such a way that the difference in
the gray levels of the neighbors with the pixel is minimum, then
compression ratio as well as the convergence of the network can be
improved. To achieve this, a Cumulative distribution function is
estimated for the image and it is used to map the image pixels. When
the mapped image pixels are used, the Back-propagation Neural
Network yields high compression ratio as well as it converges
quickly.
Abstract: This paper presents the region based segmentation method for ultrasound images using local statistics. In this segmentation approach the homogeneous regions depends on the image granularity features, where the interested structures with dimensions comparable to the speckle size are to be extracted. This method uses a look up table comprising of the local statistics of every pixel, which are consisting of the homogeneity and similarity bounds according to the kernel size. The shape and size of the growing regions depend on this look up table entries. The algorithms are implemented by using connected seeded region growing procedure where each pixel is taken as seed point. The region merging after the region growing also suppresses the high frequency artifacts. The updated merged regions produce the output in formed of segmented image. This algorithm produces the results that are less sensitive to the pixel location and it also allows a segmentation of the accurate homogeneous regions.
Abstract: It well recognized that one feature that makes a
successful company is its ability to successfully align its business goals with its information communication technologies platform.
Enterprise Resource Planning (ERP) systems contribute to achieve better performance by integrating various business functions and
providing support for information flows. However, the technological
systems complexity is known to prevent the business users to exploit in an efficient way the Enterprise Resource Planning Systems (ERP).
This paper aims to investigate the role of training in improving the
usage of ERP systems. To this end, we have designed an instrument
survey to employees of a Norwegian multinational global provider of
technology solutions. Based on the analysis of collected data, we have delineated a training model that could be high relevance for
both researchers and practitioners as a step towards a better
understanding of ERP system implementation.
Abstract: This paper present the harmonic elimination of hybrid
multilevel inverters (HMI) which could be increase the number of
output voltage level. Total Harmonic Distortion (THD) is one of the
most important requirements concerning performance indices.
Because of many numbers output levels of HMI, it had numerous
unknown variables of eliminate undesired individual harmonic and
THD nonlinear equations set. Optimized harmonic stepped waveform
(OHSW) is solving switching angles conventional method, but most
complicated for solving as added level. The artificial intelligent
techniques are deliberation to solve this problem. This paper presents
the Particle Swarm Optimization (PSO) technique for solving
switching angles to get minimum THD and eliminate undesired
individual harmonics of 15-levels hybrid multilevel inverters.
Consequently it had many variables and could eliminate numerous
harmonics. Both advantages including high level of inverter and
Particle Swarm Optimization (PSO) are used as powerful tools for
harmonics elimination.
Abstract: Urban disaster risks and vulnerabilities are great problems for Turkey. The annual loss of life and property through disaster in the world-s major metropolitan areas is increasing. Urban concentrations of the poor and less-informed in environmentally fragile locations suffer the impact of disaster disproportionately. Gecekondu (squatter) developments will compound the inherent risks associated with high-density environments, in appropriate technologies, and inadequate infrastructure. On the other hand, there are many geological disadvantages such as sitting on top of active tectonic plate boundaries, and why having avalanche, flood, and landslide and drought prone areas in Turkey. However, this natural formation is inevitable; the only way to survive in such a harsh geography is to be aware of importance of these natural events and to take political and physical measures. The main aim of this research is to bring up the magnitude of natural hazard risks in Izmir built-up zone, not being taken into consideration adequately. Because the dimensions of the peril are not taken seriously enough, the natural hazard risks, which are commonly well known, are not considered important or they are being forgotten after some time passes. Within this research, the magnitude of natural hazard risks for Izmir is being presented in the scope of concrete and local researches over Izmir risky areas.
Abstract: Transport and land use are two systems that are
mutually influenced. Their interaction is a complex process
associated with continuous feedback. The paper examines the
existing land use around an under construction metro station of the
new metro network of Thessaloniki, Greece, through the use of field
investigations, around the station-s predefined location. Moreover,
except from the analytical land use recording, a sampling
questionnaire survey is addressed to several selected enterprises of
the study area. The survey aims to specify the characteristics of the
enterprises, the trip patterns of their employees and clients, as well as
the stated preferences towards the changes the new metro station is
considered to bring to the area. The interpretation of the interrelationships
among selected data from the questionnaire survey takes
place using the method of Principal Components Analysis for
Categorical Data. The followed methodology and the survey-s results
contribute to the enrichment of the relevant bibliography concerning
the way the creation of a new metro station can have an impact on the
land use pattern of an area, by examining the situation before the
operation of the station.