Abstract: An explicit axisymmetrical FE methodology is
developed here to study the particle temperature arising in WC-Co
particle on an AISI 1045 steel substrate. Parameters of constitutive
Johnson-cook model were used for simulation. The results show that
particle velocity and kinetic energy have important role in
temperature arising of particles.
Abstract: The current paper presents a numerical approach in solving the conjugate heat transfer problems. A heat conduction code is coupled internally with a computational fluid dynamics solver for developing a couple conjugate heat transfer solver. Methodology of treating non-matching meshes at interface has also been proposed. The validation results of 1D and 2D cases for the developed conjugate heat transfer code have shown close agreement with the solutions given by analysis.
Abstract: Parametric models have been quite popular for
studying human growth, particularly in relation to biological
parameters such as peak size velocity and age at peak size velocity.
Longitudinal data are generally considered to be vital for fittinga
parametric model to individual-specific data, and for studying the
distribution of these biological parameters in a human population.
However, cross-sectional data are easier to obtain than longitudinal
data. In this paper, we present a method of combining longitudinal
and cross-sectional data for the purpose of estimating the distribution
of the biological parameters. We demonstrate, through simulations in
the special case ofthePreece Baines model, how estimates based on
longitudinal data can be improved upon by harnessing the
information contained in cross-sectional data.We study the extent of
improvement for different mixes of the two types of data, and finally
illustrate the use of the method through data collected by the Indian
Statistical Institute.
Abstract: Symbolic dynamics studies dynamical systems on the basis of the symbol sequences obtained for a suitable partition of the state space. This approach exploits the property that system dynamics reduce to a shift operation in symbol space. This shift operator is a chaotic mapping. In this article we show that in the symbol space exist other chaotic mappings.
Abstract: Suppose KY and KX are large sets of observed and
reference signals, respectively, each containing N signals. Is it possible to construct a filter F : KY → KX that requires a priori
information only on few signals, p N, from KX but performs better than the known filters based on a priori information on every
reference signal from KX? It is shown that the positive answer is
achievable under quite unrestrictive assumptions. The device behind
the proposed method is based on a special extension of the piecewise
linear interpolation technique to the case of random signal sets. The proposed technique provides a single filter to process any signal from
the arbitrarily large signal set. The filter is determined in terms of pseudo-inverse matrices so that it always exists.
Abstract: Implicit equations play a crucial role in Engineering.
Based on this importance, several techniques have been applied to
solve this particular class of equations. When it comes to practical
applications, in general, iterative procedures are taken into account.
On the other hand, with the improvement of computers, other
numerical methods have been developed to provide a more
straightforward methodology of solution. Analytical exact approaches
seem to have been continuously neglected due to the difficulty
inherent in their application; notwithstanding, they are indispensable
to validate numerical routines. Lagrange-s Inversion Theorem is a
simple mathematical tool which has proved to be widely applicable to
engineering problems. In short, it provides the solution to implicit
equations by means of an infinite series. To show the validity of this
method, the tree-parameter infiltration equation is, for the first time,
analytically and exactly solved. After manipulating these series,
closed-form solutions are presented as H-functions.
Abstract: In this paper, we use an M/G/C/C state dependent
queuing model within a complex network topology to determine the
different performance measures for pedestrian traffic flow. The
occupants in this network topology need to go through some source
corridors, from which they can choose their suitable exiting
corridors. The performance measures were calculated using arrival
rates that maximize the throughputs of source corridors. In order to
increase the throughput of the network, the result indicates that the
flow direction of pedestrian through the corridors has to be restricted
and the arrival rates to the source corridor need to be controlled.
Abstract: Stable nonzero populations without random deaths
caused by the Verhulst factor (Verhulst-free) are a rarity. Majority
either grow without bounds or die of excessive harmful mutations.
To delay the accumulation of bad genes or diseases, a new
environmental parameter Γ is introduced in the simulation. Current
results demonstrate that stability may be achieved by setting Γ = 0.1.
These steady states approach a maximum size that scales inversely
with reproduction age.
Abstract: The objectif of the present work is to determinate the
potential of the solar parabolic trough collector (PTC) for use in the
design of a solar thermal power plant in Algeria. The study is based
on a mathematical modeling of the PTC. Heat balance has been
established respectively on the heat transfer fluid (HTF), the absorber
tube and the glass envelop using the principle of energy conservation
at each surface of the HCE cross-sectionn. The modified Euler
method is used to solve the obtained differential equations. At first
the results for typical days of two seasons the thermal behavior of the
HTF, the absorber and the envelope are obtained. Then to determine
the thermal performances of the heat transfer fluid, different oils are
considered and their temperature and heat gain evolutions compared.
Abstract: The prediction of long-term deformations of concrete and reinforced concrete structures has been a field of extensive research and several different creep models have been developed so far. Most of the models were developed for constant concrete stresses, thus, in case of varying stresses a specific superposition principle or time-integration, respectively, is necessary. Nowadays, when modeling concrete creep the engineering focus is rather on the application of sophisticated time-integration methods than choosing the more appropriate creep model. For this reason, this paper presents a method to quantify the uncertainties of creep prediction originating from the selection of creep models or from the time-integration methods. By adapting variance based global sensitivity analysis, a methodology is developed to quantify the influence of creep model selection or choice of time-integration method. Applying the developed method, general recommendations how to model creep behavior for varying stresses are given.
Abstract: In this paper we introduce an efficient solution
method for the Eigen-decomposition of bisymmetric and per
symmetric matrices of symmetric structures. Here we decompose
adjacency and Laplacian matrices of symmetric structures to submatrices
with low dimension for fast and easy calculation of
eigenvalues and eigenvectors. Examples are included to show the
efficiency of the method.
Abstract: Students in high education are presented with new terms and concepts in nearly every lecture they attend. Many of them prefer Web-based self-tests for evaluation of their concepts understanding since they can use those tests independently of tutors- working hours and thus avoid the necessity of being in a particular place at a particular time. There is a large number of multiple-choice tests in almost every subject designed to contribute to higher level learning or discover misconceptions. Every single test provides immediate feedback to a student about the outcome of that test. In some cases a supporting system displays an overall score in case a test is taken several times by a student. What we still find missing is how to secure delivering of personalized feedback to a user while taking into consideration the user-s progress. The present work is motivated to throw some light on that question.
Abstract: There is a complex situation on the transport environment in the cities of the world. For the analysis and prevention of environmental problems an accurate calculation hazardous substances concentrations at each point of the investigated area is required. In the turbulent atmosphere of the city the wellknown methods of mathematical statistics for these tasks cannot be applied with a satisfactory level of accuracy. Therefore, to solve this class of problems apparatus of mathematical physics is more appropriate. In such models, because of the difficulty as a rule the influence of uneven land surface on streams of air masses in the turbulent atmosphere of the city are not taken into account. In this paper the influence of the surface roughness, which can be quite large, is mathematically shown. The analysis of this problem under certain conditions identified the possibility of areas appearing in the atmosphere with pressure tending to infinity, i.e. so-called "wall effect".
Abstract: Martingale model diagnostic for assessing the fit of logistic regression model to recurrent events data are studied. One way of assessing the fit is by plotting the empirical standard deviation of the standardized martingale residual processes. Here we used another diagnostic plot based on martingale residual covariance. We investigated the plot performance under several types of model misspecification. Clearly the method has correctly picked up the wrong model. Also we present a test statistic that supplement the inspection of the two diagnostic. The test statistic power agrees with what we have seen in the plots of the estimated martingale covariance.
Abstract: The present paper develops and validates a numerical procedure for the calculation of turbulent combustive flow in converging and diverging ducts and throuh simulation of the heat transfer processes, the amount of production and spread of Nox pollutant has been measured. A marching integration solution procedure employing the TDMA is used to solve the discretized equations. The turbulence model is the Prandtl Mixing Length method. Modeling the combustion process is done by the use of Arrhenius and Eddy Dissipation method. Thermal mechanism has been utilized for modeling the process of forming the nitrogen oxides. Finite difference method and Genmix numerical code are used for numerical solution of equations. Our results indicate the important influence of the limiting diverging angle of diffuser on the coefficient of recovering of pressure. Moreover, due to the intense dependence of Nox pollutant to the maximum temperature in the domain with this feature, the Nox pollutant amount is also in maximum level.
Abstract: A zero-field ferromagnetic Ising model is utilized to
simulate the propagation of infection in a population that assumes a
square lattice structure. The rate of infection increases with
temperature. The disease spreads faster among individuals with low J
values. Such effect, however, diminishes at higher temperatures.
Abstract: In recent years, several severe large-scale influenza
outbreaks happened in many countries, such as SARS in 2005 or
H1N1 in 2009. Those influenza Epidemics have greatly impacts not
only on people-s life and health, but medical systems in different
countries. Although severe diseases are more experienced, they are not
fully controlled. Governments have different policies to control the
spreads of diseases. However, those policies have both positive and
negative social or economical influence on people and society.
Therefore, it is necessary and essential to develop an appropriate
model for evaluations of policies. Consequently, a proper measure can
be implemented to confront the diseases. The main goal of this study is
to develop a SIR-based model for the further evaluations of the
candidate policies during the influenza outbreaks.
Abstract: In this article, the phenomenon of nonlinear
consolidation in saturated and homogeneous clay layer is studied.
Considering time-varied drainage model, the excess pore water
pressure in the layer depth is calculated. The Generalized Differential
Quadrature (GDQ) method is used for the modeling and numerical
analysis. For the purpose of analysis, first the domain of independent
variables (i.e., time and clay layer depth) is discretized by the
Chebyshev-Gauss-Lobatto series and then the nonlinear system of
equations obtained from the GDQ method is solved by means of the
Newton-Raphson approach. The obtained results indicate that the
Generalized Differential Quadrature method, in addition to being
simple to apply, enjoys a very high accuracy in the calculation of
excess pore water pressure.