Stack Ventilation for an Office Building with a Multi-Story Atrium

This study examines the stack ventilation performance of an office building located in Taipei, Taiwan. Atriums in this building act as stacks that facilitate buoyancy-driven ventilation. Computational Fluid Dynamic (CFD) simulations are used to identify interior airflow patterns, and then used these patterns to assess the building’s heat expulsion efficiency. Ambient temperatures of 20°C were adopted as the typical seasonal spring temperature range in Taipei. Further, “zero-wind” conditions are established to ensure simulation results reflected only the buoyancy effect. After checking results against neutral pressure level (NPL) level, airflow, air velocity, and indoor temperature stratification, the lower stack is modified to reduce the NPL in order to remove heat accumulated on the top floor.





References:
[1] B Givoni, Man, Climate and Architecture (2nd Ver.),1976.
[2] G. Z. Brown and Mark DeKay Sun, Wind and Light, Architectural Design Strategies (2nd Edition), 2001.
[3] The New ASHRAE Standard 55, 2004.
[4] Benjamin Stein and John S. Reynolds, Mechanical and Electrical Equipment for Building (9th Edition), 2000.
[5] Francis Allard, Natural Ventilation on Buildings, a Design Handbook, 1998.
[6] P. F. Linden, the Fluid Mechanics of Natural Ventilation, Annu. Rev. Fluid Mech, 1999, 31:201-38.
[7] Hazim B. Awbi, Ventilation of Buildings (2nd Edition), 2003.
[8] Shaun D. Fitzgerald and Andrew W. Woods, Natural Ventilation of a room with vents at multiple levels, Building and Environment 39, 2004, 501-521.
[9] Stephen R. Livermorw and Andrew W. Woods, Natural ventilation of a building with heating at multiple levels, Building and Environment 42, 2007, 1417-1430.
[10] Weather. sg.msn.com, record taken in May 2013.
[11] T. Chenvidyakan and A. Woods, Multiple steady states in stack ventilation, Building and Environment 40, 2004, 399-410.
[12] ASHRAE Handbook: Fundamentals, 2009.