Sandwich Structure Composites: Effect of Kenaf on Mechanical Properties

Sandwich structure composites produced by epoxy
core and aluminium skin were developed as potential building
materials. Interface bonding between core and skin was controlled by
varying kenaf content. Five different weight percentage of kenaf
loading ranging from 10 wt% to 50 wt% were employed in the core
manufacturing in order to study the mechanical properties of the
sandwich composite. Properties of skin aluminium with epoxy were
found to be affected by drying time of the adhesive. Mechanical
behavior of manufactured sandwich composites in relation with
properties of constituent materials was studied. It was found that 30
wt% of kenaf loading contributed to increase the flexural strength and
flexural modulus up to 102 MPa and 32 GPa, respectively. Analysis
were done on the flatwise and edgewise compression test. For
flatwise test, it was found that 30 wt% of fiber loading could
withstand maximum force until 250 kN, with compressive strength
results at 96.94 MPa. However, at edgewise compression test, the
sandwich composite with same fiber loading only can withstand 31
kN of the maximum load with 62 MPa of compressive strength
results.

• M. N. Othman
• M. Bukhari
• Z. Halim
• S. A. Mohammad
• K. Khalid

• Aluminium
• kenaf fiber epoxy
• sandwich structure composite.

[1] A. H. Abdullah, S.K Alias, N. Jenal, “Fatigue Behavior of KenafFibre Reinforced Epoxy Composites,” Engineering Journal, Vol 16, no. 5,2012, pp. 33-34.
[2] American Society for Testing, ASTM C 364/C 364M – 07 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions, West Conshohocken,2002.
[3] American Society for Testing, ASTM C 365/C 365M – 11a Standard Test Method for Flatwise Compressive Properties of Sandwich Cores, West Conshohocken, 2002.
[4] Hexcel Composites, “Mechanical Testing of Sandwich Panels”, Publication LTU035b., March 2007.
[5] I.S..Aji, S.M Sapuan,“KenafFibresAs Reinforcement For Polymeric Composites: A Review”, International Journal of Mechanical and Material Engineering (IJMME), vol. 4, no. 3, 2009, pp. 239-248.
[6] M. K. Khan, “Compressive and lamination strength of honeycomb sandwich panels with strain energy calculation from ASTM standards”, Proc. IMechE Part G: J. Aerospace Engineering, vol. 220, 2006, pp. 375-386.
[7] T. Nishino, k. Hirao& M. Kotera, “X-ray diffraction studies on stress transfer ofkenaf reinforced poly (l-lactic acid) composite,”Composites Part A, vol 37, no. 12, 2006, pp. 2269–2273.
[8] Y. Lei, Q. Wu, F. Yao & Y. Xu, ‘Preparation and properties of recycled HDPE/natural fiber composites,” Composites Part A, vol. 38, no. 7, 2007, pp. 1664–1674.