Utility Assessment Model for Wireless Technology in Construction
Construction projects are information intensive in
nature and involve many activities that are related to each other.
Wireless technologies can be used to improve the accuracy and
timeliness of data collected from construction sites and shares it with
appropriate parties. Nonetheless, the construction industry tends to be
conservative and shows hesitation to adopt new technologies. A main
concern for owners, contractors or any person in charge on a job site
is the cost of the technology in question. Wireless technologies are
not cheap. There are a lot of expenses to be taken into consideration,
and a study should be completed to make sure that the importance
and savings resulting from the usage of this technology is worth the
expenses. This research attempts to assess the effectiveness of using
the appropriate wireless technologies based on criteria such as
performance, reliability, and risk. The assessment is based on a utility
function model that breaks down the selection issue into alternatives
attribute. Then the attributes are assigned weights and single
attributes are measured. Finally, single attribute are combined to
develop one single aggregate utility index for each alternative.
[1] De la Garza, J.M., Howitt, I., “Wireless Communication and Computing
at the Construction Jobsite,” Journal of Automation in Construction, 7
(4), 1998, pp.327-3472.
[2] Nuntasunti, S., and Bernold, L., “Experimental Assessment of Wireless
Construction Technologies”. Journal of Construction Engineering and
Management, 132, (1009), 2006.
[3] Abduh, M., Skibniewski, M., “Utility Assessment of Electronic
Networking Technologies for Design-Build Projects”. Journal of
Automation in Construction, (12), 2002, pp. 167-183.
[4] Bernold, L., “Introduction to Wireless Construction. Why, What, and
How?” Proceeding of Wireless in Construction Workshop, Rutgers
University, 2006.
[5] McCullouch B., “Automating Field Data Collection on Construction
Organizations.” Proceedings of the 5th Construction Congress:
Managing Engineered Construction in Expanding Global Markets,
Minneapolis, 1997, pp. 957– 963.
[6] Cheok, G., Lipman, R., Witzgall, C., Bernal, J., and Stone, W., “NIST
Construction Automation Program Rep. No: 4 Non- Intrusive Scanning
Technology for Construction Status Determination, Building and Fire
Research Laboratory,” National Institute of Standards and Technology,
Gaithersburg, MD, 2000.
[7] Thorpe, T., and Mead, S., “Project-Specific Web Sites: Friend or Foe?”
Journal of Construction Engineering and Management, 127(5), 2001,
pp. 406–413.
[8] Akinci, B., Boukamp, F., Gordon, C., Huber, D., Lyons, C., and Park,
K., “A Formalism for utilization of sensor systems and integrated project
models for active construction quality control.” Journal of Automation
in Construction, 15(2), 2005, pp. 124–138.
[9] Hastak, M., “Advanced Automation or Conventional Construction
Process?” Journal of Automation in Construction, (7), 1998, pp. 299-
314.
[10] Georgy, M., Chang, L., Zhang, L., “Utility Function Model for
Engineering Performance Assessment”. ASCE Journal of Construction
Engineering and Management, (131), 2005, pp. 558-568.
[11] Lin, C, Wang, W., Yu, W., “Improving AHP for Construction with
Adaptive AHP Approach” Journal of Automation in Construction, (17),
2, 2008, pp. 180-187.
[12] Saaty, T.L., The Analytical Hierarchy Process: Planning, Priority
Setting, and Resources Allocation. McGraw-Hill, New York, 1980.
[13] El-Misalami, T., Walters, R., Jaselskis, E., “Construction IT Decision
Making Using Multi-attribute Utility Theory for Use in a Laboratory
Information Management System”. ASCE Journal of Construction
Engineering and Management, (12), 2006, pp. 1275-1283.
[1] De la Garza, J.M., Howitt, I., “Wireless Communication and Computing
at the Construction Jobsite,” Journal of Automation in Construction, 7
(4), 1998, pp.327-3472.
[2] Nuntasunti, S., and Bernold, L., “Experimental Assessment of Wireless
Construction Technologies”. Journal of Construction Engineering and
Management, 132, (1009), 2006.
[3] Abduh, M., Skibniewski, M., “Utility Assessment of Electronic
Networking Technologies for Design-Build Projects”. Journal of
Automation in Construction, (12), 2002, pp. 167-183.
[4] Bernold, L., “Introduction to Wireless Construction. Why, What, and
How?” Proceeding of Wireless in Construction Workshop, Rutgers
University, 2006.
[5] McCullouch B., “Automating Field Data Collection on Construction
Organizations.” Proceedings of the 5th Construction Congress:
Managing Engineered Construction in Expanding Global Markets,
Minneapolis, 1997, pp. 957– 963.
[6] Cheok, G., Lipman, R., Witzgall, C., Bernal, J., and Stone, W., “NIST
Construction Automation Program Rep. No: 4 Non- Intrusive Scanning
Technology for Construction Status Determination, Building and Fire
Research Laboratory,” National Institute of Standards and Technology,
Gaithersburg, MD, 2000.
[7] Thorpe, T., and Mead, S., “Project-Specific Web Sites: Friend or Foe?”
Journal of Construction Engineering and Management, 127(5), 2001,
pp. 406–413.
[8] Akinci, B., Boukamp, F., Gordon, C., Huber, D., Lyons, C., and Park,
K., “A Formalism for utilization of sensor systems and integrated project
models for active construction quality control.” Journal of Automation
in Construction, 15(2), 2005, pp. 124–138.
[9] Hastak, M., “Advanced Automation or Conventional Construction
Process?” Journal of Automation in Construction, (7), 1998, pp. 299-
314.
[10] Georgy, M., Chang, L., Zhang, L., “Utility Function Model for
Engineering Performance Assessment”. ASCE Journal of Construction
Engineering and Management, (131), 2005, pp. 558-568.
[11] Lin, C, Wang, W., Yu, W., “Improving AHP for Construction with
Adaptive AHP Approach” Journal of Automation in Construction, (17),
2, 2008, pp. 180-187.
[12] Saaty, T.L., The Analytical Hierarchy Process: Planning, Priority
Setting, and Resources Allocation. McGraw-Hill, New York, 1980.
[13] El-Misalami, T., Walters, R., Jaselskis, E., “Construction IT Decision
Making Using Multi-attribute Utility Theory for Use in a Laboratory
Information Management System”. ASCE Journal of Construction
Engineering and Management, (12), 2006, pp. 1275-1283.
@article{"International Journal of Business, Human and Social Sciences:70427", author = "Y. Abdelrazig and A. Ghanem", title = "Utility Assessment Model for Wireless Technology in Construction", abstract = "Construction projects are information intensive in
nature and involve many activities that are related to each other.
Wireless technologies can be used to improve the accuracy and
timeliness of data collected from construction sites and shares it with
appropriate parties. Nonetheless, the construction industry tends to be
conservative and shows hesitation to adopt new technologies. A main
concern for owners, contractors or any person in charge on a job site
is the cost of the technology in question. Wireless technologies are
not cheap. There are a lot of expenses to be taken into consideration,
and a study should be completed to make sure that the importance
and savings resulting from the usage of this technology is worth the
expenses. This research attempts to assess the effectiveness of using
the appropriate wireless technologies based on criteria such as
performance, reliability, and risk. The assessment is based on a utility
function model that breaks down the selection issue into alternatives
attribute. Then the attributes are assigned weights and single
attributes are measured. Finally, single attribute are combined to
develop one single aggregate utility index for each alternative.", keywords = "Analytic Hierarchy Process, Utility Function,
Wireless Technologies, construction management.", volume = "9", number = "5", pages = "1778-4", }