Fluidised Bed Gasification of Multiple Agricultural Biomass Derived Briquettes
Biomass briquette gasification is regarded as a
promising route for efficient briquette use in energy generation, fuels
and other useful chemicals. However, previous research has been
focused on briquette gasification in fixed bed gasifiers such as
updraft and downdraft gasifiers. Fluidised bed gasifier has the
potential to be effectively sized to medium or large scale. This study
investigated the use of fuel briquettes produced from blends of rice
husks and corn cobs biomass, in a bubbling fluidised bed gasifier.
The study adopted a combination of numerical equations and Aspen
Plus simulation software, to predict the product gas (syngas)
composition base on briquette density and biomass composition
(blend ratio of rice husks to corn cobs). The Aspen Plus model was
based on an experimentally validated model from the literature. The
results based on a briquette size 32 mm diameter and relaxed density
range of 500 to 650kg/m3, indicated that fluidisation air required in
the gasifier increased with increase in briquette density, and the
fluidisation air showed to be the controlling factor compared with the
actual air required for gasification of the biomass briquettes. The
mass flowrate of CO2 in the predicted syngas composition increased
with an increase in air flow, in the gasifier, while CO decreased and
H2 was almost constant. The ratio of H2 to CO for various blends of
rice husks and corn cobs did not significantly change at the designed
process air, but a significant difference of 1.0 was observed between
10/90 and 90/10 % blend of rice husks and corn cobs.
[1] Aspen Plus. Getting Started Building and Running a Process Model,
Version Number: V7.2 July 2010, Copyright (c) 1981-2010 by Aspen
Technology, Inc. All rights reserved.
[2] Aspen Plus. Getting Started Modeling Processes with Solids, Version
Number: V7.2 July 2010, Copyright (c) 1981-2010 by Aspen
Technology, Inc. All rights reserved.
[3] Basu P. Biomass Gasification and Pyrolysis, Practical Design and
Theory, Elsevier Inc., (2010). The Boulevard, Langford Lane
Kidlington, Oxford, OX5 1GB, UK
[4] Begum S., Rasul M.G., Akbar D., Cork D., An experiment and
numerical investigation of fluidised bed gasification of solid waste, J.
Energies 7 (2014) 43-61.
[5] Escudero D.R., "Bed height and material density effects on fluidized bed
hydrodynamics" (2010) Graduate Theses and Dissertations, Digital
Repository @ Iowa State University. Paper 11656.
[6] Lee J.M., Kim Y.J., Lee, W.J., Kim S.D., Coal-gasification kinetics
derived from pyrolysis in a fluidized-bed reactor, J. Energy (1998) 23
475–488.
[7] Michailos S., Zabaniotou A., Simulation of Olive Kernel Gasification in
a Bubbling Fluidized Bed Pilot Scale Reactor, J. Sustainable Bioenergy
Systems, 2 (2012) 145-159.
[8] Muazu R.I., Stegemann J.A., Effects of operating variables on durability
of fuel briquettes from rice husks and corn cobs, J. Fuel Processing
Technology 133, (2015), 137-145.
[9] Nikoo, M.B., Mahinpey, N., Simulation of biomass gasification in
fluidized bed reactor using ASPEN PLUS, J. Biomass Bioenergy (2008)
32 1245–1254. [10] Ramos, G., García Ruiz, M., Prieto Marqués, J. J., and Guardiola Soler,
J. (2002) "Minimum fluidization velocities for gas-solid 2d beds."
Chemical Engineering and Processing, 41(9): 761-764.
[11] Han J. & Kim Heejoon (2008), The reduction and control technology of
tar during biomass gasification/pyrolysis: An overview, journal of
Renewable and Sustainable Energy Reviews, Volume 12, Pp: 397-416.
[12] Demirbas A., Trace metal concentrations in ashes from various types of
biomass species, J. Energy Sources 25 (2003) 743–51.
[13] Jangsawang W., Gupta A.K., Kitagawa K. & Lee S.C., High
Temperature Steam and Air Gasification of Non-woody Biomass
Wastes. The 2nd Joint International Conference on “Sustainable Energy
and Environment (SEE 2006)” Bangkok, Thailand, 1-7.
[14] Doherty, W.; Reynolds, A.; Kennedy, D. The effect of air preheating in
a biomass CFB gasifier using ASPEN Plus simulation, J. Biomass
Bioenergy 3 (2009) 1158–1167.
[15] Kannan P., Shoaibi A.A., Srinivasakannan C., Optimization of Waste
Plastics Gasification Process Using Aspen-Plus, Gasification for
Practical Applications, Dr. Yongseung Yun (Ed.) (2012), ISBN: 978-
953-51-0818-4, InTech, DOI: 10.5772/48754. Available from:
http://www.intechopen.com/books/gasification-for-practicalapplications/
optimization-of-waste-plastics-gasification-process-usingaspen-
plus
[16] Sridhar H. V., Sridhar G., Dasappa, S., Rajan, N. K. S., & Paul, P. J.,
Experience of using various biomass briquettes in IBG (Iisc Bioresidue
Gasifier), Advanced Bio-residue Energy Technologies Society (2005),
Combustion Gasification and Propulsion Laboratory, Department of
Aerospace Engineering, Indian Institute of Science, Bangalore, India.
[17] Zhang L., Xu C.,& Champagne P., Overview of recent advances in
thermo-chemical conversion of biomass, J. Energy Conversion and
Management, volume 51, (2010) 969–982.
[18] Ruoppoloa G., Miccioa F., Brachib P., Picarellia A., Chironea R.,
Fluidized Bed Gasification of Biomass and Biomass/Coal Pellets in
Oxygen and Steam Atmosphere, J. Chemical Engineering Transactions,
volume 32 (2013) 595-600.
[19] Malatji P., Sampson N., & Meincken M.M., The technical pre-feasibility
to use briquettes made from wood and agricultural waste for gasification
in a downdraft gasifier for electricity generation, Energy in Southern
Africa, volume 22 (2011) 2-7.
[20] Gaston K.R., Jarvis M.W., Pepiot P., Smith K.M, Frederick W.J., &
Nimlos M.R., Biomass Pyrolysis and Gasification of Varying Particle
Sizes in a Fluidized-Bed Reactor, J. Energy Fuels, volume 25 (2011)
3747–3757.
[21] Anis S, & Zainal Z.A. X., Tar reduction in biomass producer gas via
mechanical, catalytic and thermal methods: A review, Renewable and
Sustainable Energy Reviews, volume 15 (2011) 2355–2377.
[22] Tasma D., Uzuneanu K., & Panait T., The effect of excess air ratio on
syngas produced by gasification of agricultural residues briquettes, J.
Advances in Fluid Mechanics and Heat & Mass Transfer, (2012) 204-
207.
[23] Sivakumar K., Sivaraman B., Mohan N.K., Effectiveness of briquetting
bio mass materials with different ratios in 10 kW down draft gasifier,
International Journal of Engineering Science and Technology (IJEST) 3
(2011) 7959-7966.
[24] Zhong, W., Jin, B., Zhang, Y., Wang, X., and Xiao, R., "Fluidization of
biomass particles in a gas−solid fluidized bed." Energy & Fuels, 22
(2008) 4170-4176.
[1] Aspen Plus. Getting Started Building and Running a Process Model,
Version Number: V7.2 July 2010, Copyright (c) 1981-2010 by Aspen
Technology, Inc. All rights reserved.
[2] Aspen Plus. Getting Started Modeling Processes with Solids, Version
Number: V7.2 July 2010, Copyright (c) 1981-2010 by Aspen
Technology, Inc. All rights reserved.
[3] Basu P. Biomass Gasification and Pyrolysis, Practical Design and
Theory, Elsevier Inc., (2010). The Boulevard, Langford Lane
Kidlington, Oxford, OX5 1GB, UK
[4] Begum S., Rasul M.G., Akbar D., Cork D., An experiment and
numerical investigation of fluidised bed gasification of solid waste, J.
Energies 7 (2014) 43-61.
[5] Escudero D.R., "Bed height and material density effects on fluidized bed
hydrodynamics" (2010) Graduate Theses and Dissertations, Digital
Repository @ Iowa State University. Paper 11656.
[6] Lee J.M., Kim Y.J., Lee, W.J., Kim S.D., Coal-gasification kinetics
derived from pyrolysis in a fluidized-bed reactor, J. Energy (1998) 23
475–488.
[7] Michailos S., Zabaniotou A., Simulation of Olive Kernel Gasification in
a Bubbling Fluidized Bed Pilot Scale Reactor, J. Sustainable Bioenergy
Systems, 2 (2012) 145-159.
[8] Muazu R.I., Stegemann J.A., Effects of operating variables on durability
of fuel briquettes from rice husks and corn cobs, J. Fuel Processing
Technology 133, (2015), 137-145.
[9] Nikoo, M.B., Mahinpey, N., Simulation of biomass gasification in
fluidized bed reactor using ASPEN PLUS, J. Biomass Bioenergy (2008)
32 1245–1254. [10] Ramos, G., García Ruiz, M., Prieto Marqués, J. J., and Guardiola Soler,
J. (2002) "Minimum fluidization velocities for gas-solid 2d beds."
Chemical Engineering and Processing, 41(9): 761-764.
[11] Han J. & Kim Heejoon (2008), The reduction and control technology of
tar during biomass gasification/pyrolysis: An overview, journal of
Renewable and Sustainable Energy Reviews, Volume 12, Pp: 397-416.
[12] Demirbas A., Trace metal concentrations in ashes from various types of
biomass species, J. Energy Sources 25 (2003) 743–51.
[13] Jangsawang W., Gupta A.K., Kitagawa K. & Lee S.C., High
Temperature Steam and Air Gasification of Non-woody Biomass
Wastes. The 2nd Joint International Conference on “Sustainable Energy
and Environment (SEE 2006)” Bangkok, Thailand, 1-7.
[14] Doherty, W.; Reynolds, A.; Kennedy, D. The effect of air preheating in
a biomass CFB gasifier using ASPEN Plus simulation, J. Biomass
Bioenergy 3 (2009) 1158–1167.
[15] Kannan P., Shoaibi A.A., Srinivasakannan C., Optimization of Waste
Plastics Gasification Process Using Aspen-Plus, Gasification for
Practical Applications, Dr. Yongseung Yun (Ed.) (2012), ISBN: 978-
953-51-0818-4, InTech, DOI: 10.5772/48754. Available from:
http://www.intechopen.com/books/gasification-for-practicalapplications/
optimization-of-waste-plastics-gasification-process-usingaspen-
plus
[16] Sridhar H. V., Sridhar G., Dasappa, S., Rajan, N. K. S., & Paul, P. J.,
Experience of using various biomass briquettes in IBG (Iisc Bioresidue
Gasifier), Advanced Bio-residue Energy Technologies Society (2005),
Combustion Gasification and Propulsion Laboratory, Department of
Aerospace Engineering, Indian Institute of Science, Bangalore, India.
[17] Zhang L., Xu C.,& Champagne P., Overview of recent advances in
thermo-chemical conversion of biomass, J. Energy Conversion and
Management, volume 51, (2010) 969–982.
[18] Ruoppoloa G., Miccioa F., Brachib P., Picarellia A., Chironea R.,
Fluidized Bed Gasification of Biomass and Biomass/Coal Pellets in
Oxygen and Steam Atmosphere, J. Chemical Engineering Transactions,
volume 32 (2013) 595-600.
[19] Malatji P., Sampson N., & Meincken M.M., The technical pre-feasibility
to use briquettes made from wood and agricultural waste for gasification
in a downdraft gasifier for electricity generation, Energy in Southern
Africa, volume 22 (2011) 2-7.
[20] Gaston K.R., Jarvis M.W., Pepiot P., Smith K.M, Frederick W.J., &
Nimlos M.R., Biomass Pyrolysis and Gasification of Varying Particle
Sizes in a Fluidized-Bed Reactor, J. Energy Fuels, volume 25 (2011)
3747–3757.
[21] Anis S, & Zainal Z.A. X., Tar reduction in biomass producer gas via
mechanical, catalytic and thermal methods: A review, Renewable and
Sustainable Energy Reviews, volume 15 (2011) 2355–2377.
[22] Tasma D., Uzuneanu K., & Panait T., The effect of excess air ratio on
syngas produced by gasification of agricultural residues briquettes, J.
Advances in Fluid Mechanics and Heat & Mass Transfer, (2012) 204-
207.
[23] Sivakumar K., Sivaraman B., Mohan N.K., Effectiveness of briquetting
bio mass materials with different ratios in 10 kW down draft gasifier,
International Journal of Engineering Science and Technology (IJEST) 3
(2011) 7959-7966.
[24] Zhong, W., Jin, B., Zhang, Y., Wang, X., and Xiao, R., "Fluidization of
biomass particles in a gas−solid fluidized bed." Energy & Fuels, 22
(2008) 4170-4176.
@article{"International Journal of Chemical, Materials and Biomolecular Sciences:70228", author = "Rukayya Ibrahim Muazu and Aiduan Li Borrion and Julia A. Stegemann", title = "Fluidised Bed Gasification of Multiple Agricultural Biomass Derived Briquettes", abstract = "Biomass briquette gasification is regarded as a
promising route for efficient briquette use in energy generation, fuels
and other useful chemicals. However, previous research has been
focused on briquette gasification in fixed bed gasifiers such as
updraft and downdraft gasifiers. Fluidised bed gasifier has the
potential to be effectively sized to medium or large scale. This study
investigated the use of fuel briquettes produced from blends of rice
husks and corn cobs biomass, in a bubbling fluidised bed gasifier.
The study adopted a combination of numerical equations and Aspen
Plus simulation software, to predict the product gas (syngas)
composition base on briquette density and biomass composition
(blend ratio of rice husks to corn cobs). The Aspen Plus model was
based on an experimentally validated model from the literature. The
results based on a briquette size 32 mm diameter and relaxed density
range of 500 to 650kg/m3, indicated that fluidisation air required in
the gasifier increased with increase in briquette density, and the
fluidisation air showed to be the controlling factor compared with the
actual air required for gasification of the biomass briquettes. The
mass flowrate of CO2 in the predicted syngas composition increased
with an increase in air flow, in the gasifier, while CO decreased and
H2 was almost constant. The ratio of H2 to CO for various blends of
rice husks and corn cobs did not significantly change at the designed
process air, but a significant difference of 1.0 was observed between
10/90 and 90/10 % blend of rice husks and corn cobs.", keywords = "Briquettes, fluidised bed, gasification, Aspen Plus,
syngas.", volume = "9", number = "5", pages = "622-7", }