A Comparative Study of PV Models in Matlab/Simulink
Solar energy has a major role in renewable energy
resources. Solar Cell as a basement of solar system has attracted lots
of research. To conduct a study about solar energy system, an
authenticated model is required. Diode base PV models are widely
used by researchers. These models are classified based on the number
of diodes used in them. Single and two-diode models are well
studied. Single-diode models may have two, three or four elements.
In this study, these solar cell models are examined and the simulation
results are compared to each other. All PV models are re-designed in
the Matlab/Simulink software and they examined by certain test
conditions and parameters. This paper provides comparative studies
of these models and it tries to compare the simulation results with
manufacturer-s data sheet to investigate model validity and accuracy.
The results show a four- element single-diode model is accurate and
has moderate complexity in contrast to the two-diode model with
higher complexity and accuracy
[1] Foster, R., M. Ghassemi, and A. Cota, Solar energy : renewable energy
and the environment. 2010, Boca Raton: CRC Press
[2] Khaligh, A. and O.C. Onar, Energy Harvesting: Solar, Wind, and Ocean
Energy Conversion Systems. 2009: CRC Press.
[3] Tsai, H.L., C.S. Tu, and Y.J. Su. Development of generalized
photovoltaic model using MATLAB/SIMULINK. in Proceedings of the
World Congress on Engineering and Computer Science. 2008.
[4] Salam, Z., K. Ishaque, and H. Taheri. An improved two-diode
photovoltaic (PV) model for PV system. in Power Electronics, Drives
and Energy Systems (PEDES) & 2010 Power India, 2010 Joint
International Conference on. 2010.
[5] Gow, J.A. and C.D. Manning, Development of a photovoltaic array
model for use in power-electronics simulation studies. Electric Power
Applications, IEE Proceedings -, 1999. 146(2): p. 193-200.
[6] Gow, J.A. and C.D. Manning. Development of a model for photovoltaic
arrays suitable for use in simulation studies of solar energy conversion
systems. in Power Electronics and Variable Speed Drives, 1996. Sixth
International Conference on (Conf. Publ. No. 429). 1996.
[7] S.W.Angrist, Direct Energy Conversion. 1982: p. 177-227.
[8] Altas, I.H. and A.M. Sharaf. A Photovoltaic Array Simulation Model for
Matlab-Simulink GUI Environment. in Clean Electrical Power, 2007.
ICCEP '07. International Conference on. 2007.
[9] Jordana, B., Grid Connected Pv Inverters: Modeling And Simulation, in
Dissertation. 2011. p. 92.
[10] Segev, G., G. Mittelman, and A. Kribus, Equivalent circuit models for
triple-junction concentrator solar cells. Solar Energy Materials and Solar
Cells, 2012. 98(0): p. 57-65.
[11] Ishaque, K., Z. Salam, and H. Taheri, Simple, fast and accurate twodiode
model for photovoltaic modules. Solar Energy Materials and Solar
Cells, 2011. 95(2): p. 586-594.
[12] Sera, D., R. Teodorescu, and P. Rodriguez. PV panel model based on
datasheet values. in Industrial Electronics, 2007. ISIE 2007. IEEE
International Symposium on. 2007.
[13] Elkholy, A., F.H. Fahmy, and A.A. Elela. A new technique for
photovoltaic module performance mathematical model. in Chemistry
and Chemical Engineering (ICCCE), 2010 International Conference on.
2010.
[14] Adamo, F., et al., Characterization and Testing of a Tool for
Photovoltaic Panel Modeling. Instrumentation and Measurement, IEEE
Transactions on, 2011. 60(5): p. 1613-1622.
[15] Ishaque, K., Z. Salam, and Syafaruddin, A comprehensive MATLAB
Simulink PV system simulator with partial shading capability based on
two-diode model. Solar Energy, 2011. 85(9): p. 2217-2227.
[16] Pieree Giroux, G.S., Carlos Osotio,Shripad Chandrachood, Grid
Connected PV array. 2010, Hydro-Quebec Research Institute(IREQ),
The Mathworks.
[17] Mohammed, S.S., Modeling and Simulation of Photovoltaic module
using MATLAB/Simulink. International Journal, 2011. 2(5).
[1] Foster, R., M. Ghassemi, and A. Cota, Solar energy : renewable energy
and the environment. 2010, Boca Raton: CRC Press
[2] Khaligh, A. and O.C. Onar, Energy Harvesting: Solar, Wind, and Ocean
Energy Conversion Systems. 2009: CRC Press.
[3] Tsai, H.L., C.S. Tu, and Y.J. Su. Development of generalized
photovoltaic model using MATLAB/SIMULINK. in Proceedings of the
World Congress on Engineering and Computer Science. 2008.
[4] Salam, Z., K. Ishaque, and H. Taheri. An improved two-diode
photovoltaic (PV) model for PV system. in Power Electronics, Drives
and Energy Systems (PEDES) & 2010 Power India, 2010 Joint
International Conference on. 2010.
[5] Gow, J.A. and C.D. Manning, Development of a photovoltaic array
model for use in power-electronics simulation studies. Electric Power
Applications, IEE Proceedings -, 1999. 146(2): p. 193-200.
[6] Gow, J.A. and C.D. Manning. Development of a model for photovoltaic
arrays suitable for use in simulation studies of solar energy conversion
systems. in Power Electronics and Variable Speed Drives, 1996. Sixth
International Conference on (Conf. Publ. No. 429). 1996.
[7] S.W.Angrist, Direct Energy Conversion. 1982: p. 177-227.
[8] Altas, I.H. and A.M. Sharaf. A Photovoltaic Array Simulation Model for
Matlab-Simulink GUI Environment. in Clean Electrical Power, 2007.
ICCEP '07. International Conference on. 2007.
[9] Jordana, B., Grid Connected Pv Inverters: Modeling And Simulation, in
Dissertation. 2011. p. 92.
[10] Segev, G., G. Mittelman, and A. Kribus, Equivalent circuit models for
triple-junction concentrator solar cells. Solar Energy Materials and Solar
Cells, 2012. 98(0): p. 57-65.
[11] Ishaque, K., Z. Salam, and H. Taheri, Simple, fast and accurate twodiode
model for photovoltaic modules. Solar Energy Materials and Solar
Cells, 2011. 95(2): p. 586-594.
[12] Sera, D., R. Teodorescu, and P. Rodriguez. PV panel model based on
datasheet values. in Industrial Electronics, 2007. ISIE 2007. IEEE
International Symposium on. 2007.
[13] Elkholy, A., F.H. Fahmy, and A.A. Elela. A new technique for
photovoltaic module performance mathematical model. in Chemistry
and Chemical Engineering (ICCCE), 2010 International Conference on.
2010.
[14] Adamo, F., et al., Characterization and Testing of a Tool for
Photovoltaic Panel Modeling. Instrumentation and Measurement, IEEE
Transactions on, 2011. 60(5): p. 1613-1622.
[15] Ishaque, K., Z. Salam, and Syafaruddin, A comprehensive MATLAB
Simulink PV system simulator with partial shading capability based on
two-diode model. Solar Energy, 2011. 85(9): p. 2217-2227.
[16] Pieree Giroux, G.S., Carlos Osotio,Shripad Chandrachood, Grid
Connected PV array. 2010, Hydro-Quebec Research Institute(IREQ),
The Mathworks.
[17] Mohammed, S.S., Modeling and Simulation of Photovoltaic module
using MATLAB/Simulink. International Journal, 2011. 2(5).
@article{"International Journal of Electrical, Electronic and Communication Sciences:53203", author = "Mohammad Seifi and Azura Bt. Che Soh and Noor Izzrib. Abd. Wahab and Mohd Khair B. Hassan", title = "A Comparative Study of PV Models in Matlab/Simulink", abstract = "Solar energy has a major role in renewable energy
resources. Solar Cell as a basement of solar system has attracted lots
of research. To conduct a study about solar energy system, an
authenticated model is required. Diode base PV models are widely
used by researchers. These models are classified based on the number
of diodes used in them. Single and two-diode models are well
studied. Single-diode models may have two, three or four elements.
In this study, these solar cell models are examined and the simulation
results are compared to each other. All PV models are re-designed in
the Matlab/Simulink software and they examined by certain test
conditions and parameters. This paper provides comparative studies
of these models and it tries to compare the simulation results with
manufacturer-s data sheet to investigate model validity and accuracy.
The results show a four- element single-diode model is accurate and
has moderate complexity in contrast to the two-diode model with
higher complexity and accuracy", keywords = "Fill Factor (FF), Matlab/Simulink, Maximum PowerPoint (MPP), Maximum Power Point Tracker (MPPT), Photo Voltaic(PV), Solar cell, Standard Test Condition (STC).", volume = "7", number = "2", pages = "130-6", }