Vibration Analysis of a Solar Powered UAV

This paper presents the results of a Finite Element based vibration analysis of a solar powered Unmanned Aerial Vehicle (UAV). The purpose of this paper was to quantify the free vibration, forced vibration response due to differing point inputs in order to predict the relative response magnitudes and frequencies at various wing locations of vibration induced power generators (magnet in coil) excited by gust and/or control surface pulse-decays used to help power the flight of the electric UAV. A Fluid Structure Interaction (FSI) study was performed in order to ascertain pertinent design stresses and deflections as well as aerodynamic parameters of the UAV airfoil. The 10 ft span airfoil is modeled using Mylar as the primary material. Results show that the free mode in bending is 4.8 Hz while the first forced bending mode is on range of 16.2 to 16.7 Hz depending on the location of excitation. The free torsional bending mode is 28.3 Hz, and the first forced torsional mode is range of 26.4 to 27.8 Hz, depending on the location of excitation. The FSI results predict the coefficients of aerodynamic drag and lift of 0.0052 and 0.077, respectively, which matches hand-calculations used to validate the Finite Element based results. FSI based maximum von Mises stresses and deflections were found to be 0.282 MPa and 3.4 mm, respectively. Dynamic pressures on the airfoil range from 1.04 to 1.23 kPa corresponding to velocity magnitudes in range of 22 to 66 m/s.

Authors:

• Kevin Anderson
• Sukhwinder Singh Sandhu
• Nouh Anies
• Shilpa Ravichandra
• Steven Dobbs
• Donald Edberg

Keywords:

• ANSYS
• finite element
• FSI
• UAV
• vibrations.

References:

[1] Lee, Bohwa, Poomin Park, Keunbae Kim, and Sejin Kwon. 2014. The
Flight Test and Power Simulations of an UAV Powered by Solar Cells, a
Fuel Cell and Batteries. Journal of Mechanical Science and Technology.
28, no. 1: 399-405.
[2] 2008. Solar-powered UAV Takes Flight. Reinforced Plastics. 52, no. 9:
5.
[3] Anonymous. 2005. Solar-powered UAV Flies Two Days
Straight. Machine Design. 77, no. 16: 26.
[4] Jashnani, S, T.R Nada, M Ishfaq, A Khamker, and P Shaholia. 2013.
Sizing and Preliminary Hardware Testing of Solar Powered UAV. The
Egyptian Journal of Remote Sensing and Space Science.
[5] 2007. Custom Battery Pack Powers UAV. Power Electronics
Technology (Online Exclusive).
[6] Suzuki, Koji, Paulo Kemper Filho, and James Morrison. 2012.
Automatic Battery Replacement System for UAVs: Analysis and
Design. Journal of Intelligent & Robotic Systems. 65, no. 1: 563-586.
[7] 2010. Fuel Cell/battery Hybrid UAV Takes off in Taiwan. Fuel Cells
Bulletin. 2010, no. 6: 4-5.
[8] Chang, Tan, and Hu Yu. 2015. Improving Electric Powered UAVs’
Endurance by Incorporating Battery Dumping Concept. Procedia
Engineering. 99: 168-179.
[9] Lindahl, P, E Moog, and S. R Shaw. 2012. Simulation, Design, and
Validation of an UAV SOFC Propulsion System. IEEE Transactions on
Aerospace and Electronic Systems. 48, no. 3: 2582-2593.
[10] Jang, Jung Soon, and D Liccardo. 2007. Small UAV Automation Using
MEMS. IEEE Aerospace and Electronic Systems Magazine. 22, no. 5:
30-34.
[11] Oliver, Joseph A, John B Kosmatka, François M Hemez, and Charles R
Farrar. 2007. Finite Element Model Correlation of a Composite UAV
Wing Using Modal Frequencies. Proceedings of SPIE. 6532, no. 1.
[12] Haghighat, Sohrab, S Haghighat, Hugh H.T Liu, H.H.T Liu, J.R.R.A
Martins, and Joaquim R.R.A Martins. 2008. Modeling and Simulation of
Flexible UAVs with Large Aspect Ratio. 2008 Asia Simulation
Conference - 7th International Conference on System Simulation and
Scientific Computing. 504-509.
[13] Ahmad, Kamran, and Hammad Rahman. 2012. Flutter Analysis of XHALE
UAV-A Test Bed for Aeroelastic Results Validation. Applied
Mechanics and Materials. 245: 303.
[14] Waisman, H. 2004. Open-loop Flutter Analysis of a Composite UAV
Model Using the Active Stiffening Effect. Finite Elements in Analysis
and Design. 40, no. 11: 1283-1295.
[15] Grodzki, W, and A Łukaszewicz. 2015. Design and Manufacture of
Unmanned Aerial Vehicles (UAV) Wing Structure Using Composite
Materials.Materialwissenschaft Und Werkstofftechnik. 46, no. 3: 269-
278
[16] 2009. Best Practice Guidelines for handling Automotive External
Aerodynamics with Fluent. Marco Lanfrit. : 3-4