Turbine Trip without Bypass Analysis of Kuosheng Nuclear Power Plant Using TRACE Coupling with FRAPTRAN

This analysis of Kuosheng nuclear power plant (NPP)
was performed mainly by TRACE, assisted with FRAPTRAN and
FRAPCON. SNAP v2.2.1 and TRACE v5.0p3 are used to develop the
Kuosheng NPP SPU TRACE model which can simulate the turbine
trip without bypass transient. From the analysis of TRACE, the
important parameters such as dome pressure, coolant temperature and
pressure can be determined. Through these parameters, comparing
with the criteria which were formulated by United States Nuclear
Regulatory Commission (U.S. NRC), we can determine whether the
Kuoshengnuclear power plant failed or not in the accident analysis.
However, from the data of TRACE, the fuel rods status cannot be
determined. With the information from TRACE and burn-up analysis
obtained from FRAPCON, FRAPTRAN analyzes more details about
the fuel rods in this transient. Besides, through the SNAP interface, the
data results can be presented as an animation. From the animation, the
TRACE and FRAPTRAN data can be merged together that may be
realized by the readers more easily. In this research, TRACE showed
that the maximum dome pressure of the reactor reaches to 8.32 MPa,
which is lower than the acceptance limit 9.58 MPa. Furthermore,
FRAPTRAN revels that the maximum strain is about 0.00165, which
is below the criteria 0.01. In addition, cladding enthalpy is 52.44 cal/g
which is lower than 170 cal/g specified by the USNRC NUREG-0800
Standard Review Plan.

• J. R. Wang
• H. T. Lin
• H. C. Chang
• W. K. Lin
• W. Y. Li
• C. Shih

• Turbine trip without bypass
• Kuosheng NPP
• TRACE
• FRAPTRAN
• SNAP animation.

[1] Taiwan Power Company, "Final Safety Analysis Report for Kuosheng
Nuclear Power Station Units 1&2 (FSAR)”, 2001.
[2] U.S. NRC, "TRACE V5.0 user’s manual”, Division of Safety Analysis
Office of Nuclear Regulatory Research U.S. Nuclear Regulatory
Commission Washington, DC 20555-0001, 2010.
[3] K.J. Geelhood, W.G. Luscher, C.E. Beyer, "FRAPTRAN 1.4: Integral
Assessment”, Pacific Northwest National LaboratoryP.O. Box 999
Richland, WA 99352.
[4] U.S. NRC, "Symbolic Nuclear Analysis Package (SNAP) User’s
Manual”, Applied Programming Technology, Inc. 2007
[5] INER, "Guideline of Generating Parameters for Reload Licensing
Analyses for Kuosheng Units 1 and 2”, INER-6529R, 2009.
[6] Taiwan Power Company, "Technical Specifications Revision 0,
Kuosheng Nuclear Power Station Units 1 & 2”, January 2008.