Study on Cross-flow Heat Transfer in Fixed Bed

Radial flow reactor was focused for large scale methanol synthesis and in which the heat transfer type was cross-flow. The effects of operating conditions including the reactor inlet air temperature, the heating pipe temperature and the air flow rate on the cross-flow heat transfer was investigated and the results showed that the temperature profile of the area in front of the heating pipe was slightly affected by all the operating conditions. The main area whose temperature profile was influenced was the area behind the heating pipe. The heat transfer direction according to the air flow directions. In order to provide the basis for radial flow reactor design calculation, the dimensionless number group method was used for data fitting of the bed effective thermal conductivity and the wall heat transfer coefficient which was calculated by the mathematical model with the product of Reynolds number and Prandtl number. The comparison of experimental data and calculated value showed that the calculated value fit the experimental data very well and the formulas could be used for reactor designing calculation.

Authors:

• Hong-fang Ma
• Hai-tao Zhang
• Wei-yong Ying
• Ding-ye Fang

Keywords:

• Cross-flow
• Heat transfer
• Fixed bed
• Mathematical model

References:

[1] K. C. Xie, D. Y. Fang, Methnaol technology. Beijing: Chemical Industry
Press, 2010.
[2] X. N. Fan, E. Z. Bai, "Technology development of methanol production
and the supply & demand forecast", Chemical Catalyst and Methanol
Technology, no. 3, pp. 14-16, 2006.
[3] K. C. Xie, W. Y. Ying, Chemicals synthesis from coal. Beijing: Chemical
Industry Press, 2010.
[4] H. F. Ma, W. Y. Ying, D. Y Fang, "Simulation of a combined converter
for methanol synthesis", Journal of east China University of Science and
Technology, vol. 34, no. 2, pp. 149-153, 2008
[5] J. M. Wu, H. T. Zhang, W. Y. Ying, D. Y. Fang, "Effective Thermal
Conductivity of Fixed Packing Bed of Cobalt-based Catalyst", Chinese
Journal of Process Engineering, vol. 10, no. 1, pp. 29-34, 2010.
[6] O. Krischer, K. Kroll, Die wissenschaftlischen grundlagen der
troknungstechnik. Berlin: Gottingen Heiderberg, 1956.
[7] S. Yagi, D. Kunii, "Studies on effective thermal conductivities in packed
beds", AIChE J, vol. 3, pp. 373-381, 1957.
[8] D. Kunii, J. M. Smith, "Heat transfer characteristics of porous rocks",
AIChE J, vol. 6, pp. 71-78, 1960.
[9] E. U. Schlunder, "Local heat transfer coefficients in film condensation at
high prandtl numbers", Chem Ing Tech, vol. 38, pp. 967-979, 1966.
[10] J. Butt, "Thermal conductivity of porous catalysts", AIChE J, vol. 11, pp.
106-112, 1965.
[11] D. L. Swift, "The thermal conductivity of spherical metal powders
including the effect of an oxide coating", Int J Heat Mass Transfer, vol. 9,
pp. 1061-1074, 1966.
[12] P. Zehner, E. U. Schlunder, "Thermal conductivity of granular material at
moderate temperature", Chem Ing Tech, vol. 42, pp. 933-941, 1970.
[13] R. Krupiczka, "Analysis of thermal conductivity in granular materials",
International Chem Eng, vol. 7, no. 1, pp. 122-143, 1967.
[14] K. Nasr, "An experimental investigation on forced convection heat
transfer from a horizontal cylinder embedded in a packed bed", Journal of
Heat Transfer, vol. 116, pp. 73-79, 1994.
[15] K. Nasr´╝îS. Ramadhyani, R. Viskanta, "Numerical studies of forced
convection heat transfer from a horizontal cylinder embedded in a packed
bed", Int J Heat Mass Transfer, vol. 38, no. 13, pp. 2353-2366,1995.
[16] R. M. Fand, R. T. Phan, "Combined forced and natural convection heat
transfer from a horizontal cylinder embedded in a porous medium", Int J
Heat Mass Transfer, vol. 30, no. 7, pp. 1351-1358,1987.