Production of Bioethanol through Hydrolysis of Agro-Industrial Banana Crop Residues
Nowadays, the main biofuels source production as bioethanol is food crops. This means a high competition between foods and energy production. For this reason, it is necessary to take into account the use of new raw materials friendly to the environment. The main objective of this paper is to evaluate the potential of the agro-industrial banana crop residues in the production of bioethanol. A factorial design of 24 was used, the design has variables such as pH, time and concentration of hydrolysis, another variable is the time of fermentation that is of 7 or 15 days. In the hydrolysis phase, the pH is acidic (H2SO4) or basic (NaOH), the time is 30 or 15 minutes and the concentration is 0.1 or 0.5 M. It was observed that basic media, low concentrations, fermentation, and higher pretreatment times produced better performance in terms of biofuel obtained.
[1] G. O. Young, “Synthetic structure of industrial plastics (Book style with paper title and editor),” in Plastics, 2nd ed. vol. 3, J. Peters, Ed. New York: McGraw-Hill, 1964, pp. 15–64.
[2] K. Albarracín, "Obtención de Bioetanol Anhidro a Partir de Paja (Stipa ichu)", Revista Politécnica, vol. 36, 2nd, 2015.
[3] M. Fernandes,"Bioethanol production from extracted olive pomace: dilute acid hydrolysis", Bioethanol, vol. 2, 1st, pp. 103-111, 2016.
[4] M. García,”Alkali treatment of fungal pretreated wheat straw for bioethanol production", Bioethanol, vol. 2, 1st, pp. 32-43, 2016.
[5] M. Moretti, "Posible proceso productivo de etanol con residuos de banano y sus impactos en el Valle del Chira", Ingeniero Industrial y sistemas, Universidad de Piura, 2014.
[6] D. Benarji, "Statistical Optimizations of Fermentation Factors on Bioethanol Production from Mahua Flower (Madhuca indica) with Saccharomyces cerevisiae by Response Surface Methodology in Batch Bioreactor", Journal of Microbiology and Biomedical Research, vol. 2, 1st, pp. 1-7, 2016.
[7] A. Guarnizo, "Pretratamientos de la celulosa y biomasa para la sacarificación.", Scientia et Technica, vol. 42, 1st, pp. 284-287, 2009.
[8] A. Gutiérrez, J. del Rio, “Composición química de diversos materiales lignocelulósicos de interés industrial y análisis estructural de lignina”, Biotecnología, Universidad de Sevilla, 2010.
[9] J. Sánchez,"Análisis tecno-económico de una biorefinería a partir de residuos del plátano", Revista de la Facultad de Ciencias Químicas, vol. 13, pp. 32-38, 2015.
[10] L. Cuervo,"Lignocelulosa Como Fuente de Azúcares Para la Producción de Etanol", BioTecnología, vol. 13, 3rd, pp. 11-21, 2009.
[11] P. Meléndez, "Análisis del pretratamiento de residuos lignocelulósicos para la producción de biocombustibles y bioproductos de alto valor agregado", Jóvenes en la Ciencia, vol. 1, 2nd, pp. 534-538, 2015.
[12] L. Niño López; A. Acosta Cárdenas; R. Gelves Zambrano, “Evaluación de pretratamientos químicos para la hidrolisis enzimática de residuos lignocelulósicos de yuca”, Revista facultad de ingeniería universidad de Antioquia, núm. 69, pp. 317-326, 2013.
[13] R. Silverstein, “Spectrometric identification of organic compounds”. New York: Wiley, 1981.
[1] G. O. Young, “Synthetic structure of industrial plastics (Book style with paper title and editor),” in Plastics, 2nd ed. vol. 3, J. Peters, Ed. New York: McGraw-Hill, 1964, pp. 15–64.
[2] K. Albarracín, "Obtención de Bioetanol Anhidro a Partir de Paja (Stipa ichu)", Revista Politécnica, vol. 36, 2nd, 2015.
[3] M. Fernandes,"Bioethanol production from extracted olive pomace: dilute acid hydrolysis", Bioethanol, vol. 2, 1st, pp. 103-111, 2016.
[4] M. García,”Alkali treatment of fungal pretreated wheat straw for bioethanol production", Bioethanol, vol. 2, 1st, pp. 32-43, 2016.
[5] M. Moretti, "Posible proceso productivo de etanol con residuos de banano y sus impactos en el Valle del Chira", Ingeniero Industrial y sistemas, Universidad de Piura, 2014.
[6] D. Benarji, "Statistical Optimizations of Fermentation Factors on Bioethanol Production from Mahua Flower (Madhuca indica) with Saccharomyces cerevisiae by Response Surface Methodology in Batch Bioreactor", Journal of Microbiology and Biomedical Research, vol. 2, 1st, pp. 1-7, 2016.
[7] A. Guarnizo, "Pretratamientos de la celulosa y biomasa para la sacarificación.", Scientia et Technica, vol. 42, 1st, pp. 284-287, 2009.
[8] A. Gutiérrez, J. del Rio, “Composición química de diversos materiales lignocelulósicos de interés industrial y análisis estructural de lignina”, Biotecnología, Universidad de Sevilla, 2010.
[9] J. Sánchez,"Análisis tecno-económico de una biorefinería a partir de residuos del plátano", Revista de la Facultad de Ciencias Químicas, vol. 13, pp. 32-38, 2015.
[10] L. Cuervo,"Lignocelulosa Como Fuente de Azúcares Para la Producción de Etanol", BioTecnología, vol. 13, 3rd, pp. 11-21, 2009.
[11] P. Meléndez, "Análisis del pretratamiento de residuos lignocelulósicos para la producción de biocombustibles y bioproductos de alto valor agregado", Jóvenes en la Ciencia, vol. 1, 2nd, pp. 534-538, 2015.
[12] L. Niño López; A. Acosta Cárdenas; R. Gelves Zambrano, “Evaluación de pretratamientos químicos para la hidrolisis enzimática de residuos lignocelulósicos de yuca”, Revista facultad de ingeniería universidad de Antioquia, núm. 69, pp. 317-326, 2013.
[13] R. Silverstein, “Spectrometric identification of organic compounds”. New York: Wiley, 1981.
@article{"International Journal of Biological, Life and Agricultural Sciences:76005", author = "Sánchez Acuña and Juan Camilo and Granados Gómez and Mildred Magaly and Navarrete Rodríguez and Luisa Fernanda", title = "Production of Bioethanol through Hydrolysis of Agro-Industrial Banana Crop Residues", abstract = "Nowadays, the main biofuels source production as bioethanol is food crops. This means a high competition between foods and energy production. For this reason, it is necessary to take into account the use of new raw materials friendly to the environment. The main objective of this paper is to evaluate the potential of the agro-industrial banana crop residues in the production of bioethanol. A factorial design of 24 was used, the design has variables such as pH, time and concentration of hydrolysis, another variable is the time of fermentation that is of 7 or 15 days. In the hydrolysis phase, the pH is acidic (H2SO4) or basic (NaOH), the time is 30 or 15 minutes and the concentration is 0.1 or 0.5 M. It was observed that basic media, low concentrations, fermentation, and higher pretreatment times produced better performance in terms of biofuel obtained.
", keywords = "Bioethanol, biofuels, banana waste, hydrolysis.", volume = "10", number = "10", pages = "695-4", }
