Operation Assay of an Industrial Single-Source – Single-Detector Gamma CT Using MCNP4C Code Simulation and Experimental Test Comparisons
A 3D industrial computed tomography (CT)
manufactured based on a first generation CT systems, single-source
– single-detector, was evaluated. Operation accuracy assessment of
the manufactured system was achieved using simulation in
comparison with experimental tests. 137Cs and 60Co were used as a gamma source. Simulations were achieved using MCNP4C code.
Experimental tests of 137Cs were in good agreement with the simulations
[1] J., Noel, "Advantages of CT in 3D Scanning of Industrial Parts" , North
Star Imaging Inc. 1(3) (2008)18.
[2] J.M., de Oliveira Jr., A.C.G., Martins and J.A., DE Milito, "Analysis of
Concrete Material through Gamma Ray Computerized Tomography",
Brazilian Journal of Physics A 34(3) (2004) 1020.
[3] H. Toyokawa et al., "Gamma-ray computed tomography using 10 MeV
laser-compton photon beam", Proceedings of the Particle Accelerator Conference. (2003) .
[4] W.A.P., Calvo et al., "Gamma-ray computed tomography SCANNERS
for applications in multiphase system columns", NUKLEONIKA. 54(2)
(2009)129 .
[5] D.C., Camp, H.E., Martz, G.P., Roberson, D.J., Decman and R.T.,
Bernardi, "Nondestructive waste-drum assay for transuranic content by
gamma-ray active and passive computed tomography", Nuclear
Instruments and Methods in Physics Research Section A: Accelerators,
Spectrometers, Detectors and Associated Equipment. 495(1) (2002) 69.
[6] H.,Lettenbauer, B. Georgi and D. Weiß, "Means to Verify the Accuracy
of CT Systems for Metrology Applications", (In the Absence of Established International Standards) DIR 2007 - International
Symposium on Digital industrial Radiology and Computed Tomography,
Lyon, France, (2007).
[7] D., Braz, R.T., Lopes and L.M.G., da Motta, "Computed tomography: an
evaluation of the effect of adding polymer SBS to asphaltic mixtures
used in paving" , Applied Radiation and Isotopes. 53(4-5) (2000) 725.
[8] M.C., Rocha et al., "Moisture profile measurements of concrete samples in vertical water flow by gamma ray transmission method", Radiation
Physics and Chemistry. 61(3) (2001) 567.
[9] A., Rinnhofer, A. Petutschnigg and J.-P., Andreu, "Internal log scanning for optimizing breakdown", Computers and Electronics in Agriculture.
41( 1-3) (2003) 7.
[10] Flisch, A. et al, "Industrial Computed Tomography in Reverse Engineering Applications". DGZfPProc. BB 67-CD. (1999)8.
[11] L., Franco, F., G├│mez, A., Iglesias, F., Vidal and R., "Ameneiro,
Industrial radiography and tomography based on scanning linear
scintillator array". 4th international conference on NDT. Ceret Greece.
(2007).
[12] "Industrial process gamma tomography": final report of a coordinated
research project (IAEA-TECDOC 1589) by International Atomic Energy
Agency (2003-2007).
[13] Briesmeister, J., 2000. "MCNPTMÔÇöa general Monte Carlo NParticle Transport Code", LA 1265-M, Version 4C. Los Alamos Laboratory,
USA.
[1] J., Noel, "Advantages of CT in 3D Scanning of Industrial Parts" , North
Star Imaging Inc. 1(3) (2008)18.
[2] J.M., de Oliveira Jr., A.C.G., Martins and J.A., DE Milito, "Analysis of
Concrete Material through Gamma Ray Computerized Tomography",
Brazilian Journal of Physics A 34(3) (2004) 1020.
[3] H. Toyokawa et al., "Gamma-ray computed tomography using 10 MeV
laser-compton photon beam", Proceedings of the Particle Accelerator Conference. (2003) .
[4] W.A.P., Calvo et al., "Gamma-ray computed tomography SCANNERS
for applications in multiphase system columns", NUKLEONIKA. 54(2)
(2009)129 .
[5] D.C., Camp, H.E., Martz, G.P., Roberson, D.J., Decman and R.T.,
Bernardi, "Nondestructive waste-drum assay for transuranic content by
gamma-ray active and passive computed tomography", Nuclear
Instruments and Methods in Physics Research Section A: Accelerators,
Spectrometers, Detectors and Associated Equipment. 495(1) (2002) 69.
[6] H.,Lettenbauer, B. Georgi and D. Weiß, "Means to Verify the Accuracy
of CT Systems for Metrology Applications", (In the Absence of Established International Standards) DIR 2007 - International
Symposium on Digital industrial Radiology and Computed Tomography,
Lyon, France, (2007).
[7] D., Braz, R.T., Lopes and L.M.G., da Motta, "Computed tomography: an
evaluation of the effect of adding polymer SBS to asphaltic mixtures
used in paving" , Applied Radiation and Isotopes. 53(4-5) (2000) 725.
[8] M.C., Rocha et al., "Moisture profile measurements of concrete samples in vertical water flow by gamma ray transmission method", Radiation
Physics and Chemistry. 61(3) (2001) 567.
[9] A., Rinnhofer, A. Petutschnigg and J.-P., Andreu, "Internal log scanning for optimizing breakdown", Computers and Electronics in Agriculture.
41( 1-3) (2003) 7.
[10] Flisch, A. et al, "Industrial Computed Tomography in Reverse Engineering Applications". DGZfPProc. BB 67-CD. (1999)8.
[11] L., Franco, F., G├│mez, A., Iglesias, F., Vidal and R., "Ameneiro,
Industrial radiography and tomography based on scanning linear
scintillator array". 4th international conference on NDT. Ceret Greece.
(2007).
[12] "Industrial process gamma tomography": final report of a coordinated
research project (IAEA-TECDOC 1589) by International Atomic Energy
Agency (2003-2007).
[13] Briesmeister, J., 2000. "MCNPTMÔÇöa general Monte Carlo NParticle Transport Code", LA 1265-M, Version 4C. Los Alamos Laboratory,
USA.
@article{"International Journal of Mechanical, Industrial and Aerospace Sciences:53874", author = "M. Ghanadi and M. Rezazadeh* and M. Ardeshiri and R. Gholipour Peyvandi and M. Jafarzadeh and M. Shahriari and M.Rezaei Rad and Z. Gholamzadeh", title = "Operation Assay of an Industrial Single-Source – Single-Detector Gamma CT Using MCNP4C Code Simulation and Experimental Test Comparisons", abstract = "A 3D industrial computed tomography (CT)
manufactured based on a first generation CT systems, single-source
– single-detector, was evaluated. Operation accuracy assessment of
the manufactured system was achieved using simulation in
comparison with experimental tests. 137Cs and 60Co were used as a gamma source. Simulations were achieved using MCNP4C code.
Experimental tests of 137Cs were in good agreement with the simulations", keywords = "Gamma source, Industrial CT, MCNP4C, Operation assessment", volume = "5", number = "1", pages = "64-5", }
