Numerical Investigation of Nanofluid Based Thermosyphon System

A thermosyphon system is a heat transfer loop which
operates on the basis of gravity and buoyancy forces. It guarantees a
good reliability and low maintenance cost as it does not involve any
mechanical pump. Therefore, it can be used in many industrial
applications such as refrigeration and air conditioning, electronic
cooling, nuclear reactors, geothermal heat extraction, etc. But flow
instabilities and loop configuration are the major problems in this
system. Several previous researchers studied that stabilities can be
suppressed by using nanofluids as loop fluid. In the present study a
rectangular thermosyphon loop with end heat exchangers are
considered for the study. This configuration is more appropriate for
many practical applications such as solar water heater, geothermal
heat extraction, etc. In the present work, steady-state analysis is
carried out on thermosyphon loop with parallel flow coaxial heat
exchangers at heat source and heat sink. In this loop nanofluid is
considered as the loop fluid and water is considered as the external
fluid in both hot and cold heat exchangers. For this analysis onedimensional
homogeneous model is developed. In this model,
conservation equations like conservation of mass, momentum, energy
are discretized using finite difference method. A computer code is
written in MATLAB to simulate the flow in thermosyphon loop. A
comparison in terms of heat transfer is made between water and
nanofluid as working fluids in the loop.

• Kiran Kumar K
• Ramesh Babu Bejjam
• Atul Najan

• Heat exchanger
• Heat transfer
• Nanofluid
• Thermosyphon loop.

[1] P. Garibaldi, M. Misale, Experiments in single phase natural circulation
mini loops with different working fluids and geometries, Journal of
Heat Transfer 130 (2008) 245-254.
[2] A.K. Nayak, et.al, Analytical study of nuclear-coupled density-wave
instability in a natural circulation pressure tube type boiling water
reactor, Nuclear Engineering and Design 195 (2000) 27–44.
[3] B.J. Huang, Similarity theory of solar water heater with natural
circulation, Solar Energy 25 (1980) 105–116.
[4] G. Vladimir, Pastukhov, Yury F. Maydanik, Low-noise cooling system
for PC on the base of loop heat pipes, Applied Thermal Engineering 27
(2007) 894–901.
[5] J.S. Lee, S.H. Rhi, Use of two-phase thermosyphons for thermoelectric
refrigeration: experiment and analysis, Applied Thermal Engineering
23 (2003) 1167–1176.
[6] D.B. Kreitlow, G.M. Reistad, Thermosyphon models for downhole heat
exchanger application in shallow geothermal systems, Journal of Heat
Transfer 100 (1978) 713–719.
[7] K.E. Torrance, Open–loop Thermosyphons with geological
application, Journal of Heat Transfer 100 (1979) 677–683.
[8] Zoubida Haddad, HakanF.Oztop , EiyadAbu-Nada, Amina Mataoui, A
review on natural convective heat transfer of nanofluids, Renewable
and Sustainable Energy Reviews 16 (2012) 5363–5378. [9] J. Buongiorno, Convective Transport in Nanofluids, Journal of Heat
Transfer (ASME), 128 (3) (2006).
[10] Khalil Khanafer, Kambiz Vafai, A critical synthesis of thermophysical
characteristics of nanofluids, International Journal of Heat and Mass
Transfer 54 (2011) 4410–4428.
[11] John Philip P.D. Shima, Thermal properties of nanofluids, Advances in
Colloid and Interface Science 183-184 (2012) 30–45.
[12] Y. Zvirin, A review of natural circulation loops in pressurized water
reactors and other systems, Nuclear Engineering and Design 67 (1981)
203–225.
[13] Prashant K. Jain , Rizwan-uddin , Numerical analysis of supercritical
flow instabilities in a natural circulation loop, Nuclear Engineering and
Design 238 (2008) 1947–1957.
[14] K. Kiran Kumar, M. Ram Gopal, Steady-state analysis of CO2 based
natural circulation loopswith end heat exchangers, Applied Thermal
Engineering 29 (2009) 1893–1903.
[15] R.K. Shah, A. London, Laminar forced convective in ducts, Academic
Press, New York, 1978.
[16] V. Gnielinski, Equations for calculating heat transfer in single tube
rows and banks of tubes, Int. Chem. Eng. 19 (3) (1979) 380–391.
[17] Y. Xuan, Q. Li, Investigation convective heat transfer and flow features
of nanofluids, J. Heat Transfer 125 (2002) 151–155.
[18] K. Stephan, Warmeubergang und Drucckabfall bei nichtausgebildeter,
Laminar stomung in Rohren und ebenen spalten, Chem. Ing. Tech. 31
(1959) 73.
[19] Khalil Khanafer, Kambiz Vafai, A critical synthesis of thermophysical
characteristics of nanofluids, International Journal of Heat and Mass
Transfer 54 (2011) 4410–4428.