Mathematical Simulation of Bubble Column Slurry Reactor for Direct Dimethyl Ether Synthesis Process from Syngas

Based on a global kinetics of direct dimethyl ether (DME) synthesis process from syngas, a steady-state one-dimensional mathematical model for the bubble column slurry reactor (BCSR) has been established. It was built on the assumption of plug flow of gas phase, sedimentation-dispersion model of catalyst grains and isothermal chamber regardless of reaction heats and rates for the design of an industrial scale bubble column slurry reactor. The simulation results indicate that higher pressure and lower temperature were favorable to the increase of CO conversion, DME selectivity, products yield and the height of slurry bed, which has a coincidence with the characteristic of DME synthesis reaction system, and that the height of slurry bed is lessen with the increasing of operation temperature in the range of 220-260℃. CO conversion, the optimal operation conditions in BCSR were proposed. 





References:
[1] K. D. P. Nigam, A. Schumpe, Three-phase Sparged Reactors. London:
Gordon and Breach Science Publishers, 1996, ch. 5-6, pp. 339-422.
[2] A. T. Aguayo, J. Ere├▒a, I. Sierra, M. Olazar, J. Bilbao, "Deactivation and
regeneration of hybrid catalysts in the single-step synthesis of dimethyl
ether from syngas and CO2," Catalysis Today, vol. 106, no. 1-4, pp.
265-270, Oct. 2005.
[3] J. Ere├▒a, R. Garo├▒a, J. M. Arandes, A.T. Aguayo, J. Bilbao, "Effect of
operating conditions on the synthesis of dimethyl ether over
CuO-ZnO-Al2O3/NaHZSM-5 bifunctional catalyst," Catal. Today, vol.
107-108, pp. 467-473, Oct. 2005.
[4] A.T. Aguayo, J. Ere├▒a, D. Mier, J. M.Arandes, M. Olazar, J. Bilbao,
"Kinetic modeling of dimethyl ether synthesis in a single step on a
CuO-ZnO-Al2O3/╬│-Al2O3 catalyst," Ind. Eng. Chem. Res., vol. 46, no. 17,
pp. 5522-5530, July. 2007.
[5] Z.-H. Gao, W. Huang, J.-Y. Wang, L.-H. Yin, K.-C. Xie, "Complete
liquid-phase preparation and characterization of Cu-Zn-Al-Zr slurry
catalysts for synthesis of dimethyl ether," Acta Chimica Sinica, vol. 66,
no. 3, pp. 295-300, Feb. 2008.
[6] D. Song, W. Cho, G. Lee, D. K. Park, E. S. Yoon, "Numerical analysis of
a pilot-scale fixed-bed reactor for dimethyl ether (DME) synthesis," Ind.
Eng. Chem. Res., vol. 47, no. 13, pp. 4553-4559 May. 2008.
[7] W.-Z. Lu, L.-H. Teng, W.-D. Xiao, "Simulation and experiment study of
dimethyl ether synthesis from syngas in a fluidized-bed reactor," Chem.
Eng. Sci., vol. 59, no.22-23, pp.5455-5464, Nov-Dec. 2004.
[8] Z.-G. Nie, H.-W. Liu, D.-H. Liu, W.-Y. Ying, D.-Y. Fang, "The global
kinetics of synthesis of dimethyl ether from syngas containing N2 over
bifunctional catalyst," Chemical Reaction Engineering and Technology,
vol. 20, no. 1, pp. 1-7, Mar. 2004.
[9] D.-H. Liu, X. Hua, D.-Y. Fang, "Mathematical Simulation and Design of
three-phase bubble column reactor for direct synthesis of dimethyl ether
from syngas," Journal of Natural Gas Chemistry, vol. 16, no.2, pp.
193-199, Apr. 2007.
[10] W.-D. Song, B.-C. Zhu, Z.-C. Luo, L.-B. Yu, G.-X. Feng, X. Xu,
"Computation for heat of reaction and equilibrium constant of methanol
synthesis under pressure by using SHBWR equation of state," Journal of
East China University of Science and Technology, vol. 17, no. 1, pp.
11-24, Jan. 1981.
[11] Q. Zhang, J. Yang, W.-Y. Ying, D.-Y.Fang, "Calculation of equilibrium
conversion and selectivity for dimethyl ether synthesis from syngas,"
Chemical Engineering, vol. 33, no. 2, pp. 64-68, Apr. 2005.
[12] Y.-L. Zhao, "Mathematical model for bubble column slurry reactor,"
Chemical Engineering, vol. 19, no. 5, pp. 13-21, Oct. 1991.
[13] V. M. H. Govindarao, "On the dynamics of bubble column slurry
reactors," Chem. Eng. J., vol. 9, no. 3, pp. 229-240, June. 1975.
[14] V. M. H. Govindarao, M. Chidambaram, "Semibatch bubble-column
slurry reactors: effect of dispersion on the steady-state behavior," AIChE
J., vol. 30, no. 5, pp. 842-845, Sept .1984.
[15] D. N. Smith, J. A. Ruether, "Dispersed solid dynamics in a slurry bubble
column," Chem. Eng. Sci., vol. 40, no. 5, pp. 741-754, May. 1985.
[16] M.-H. Chen, Principles of Chemical Industry (volume two). Beijing:
Chemical Industry Press, 2000, ch. 5, pp. 197.
[17] B.-Q. Ding, J.-B. Zhang, D.-Y. Fang, B.-C. Zhu, "Hydrodynamic study of
three-phase slurry reactor with high solid concentration," Journal of East
China University of Science and Technology, vol. 26, no. 3, pp. 22-231,
June. 2000.
[18] H.-F. Qin, S.-R. Wang, B.-Q. Ding, B.-C. Zhu, "Determination and
estimation of physical property data for liquid paraffin," Natural Gas
Chemical Industry, vol. 24, no. 3, pp. 56-58, June. 1999.