Loss Analysis by Loading Conditions of Distribution Transformers
Efficient use of energy, the increase in demand of
energy and also with the reduction of natural energy sources, has
improved its importance in recent years. Most of the losses in the
system from electricity produced until the point of consumption is
mostly composed by the energy distribution system. In this study,
analysis of the resulting loss in power distribution transformer and
distribution power cable is realized which are most of the losses in
the distribution system. Transformer losses in the real distribution
system are analyzed by CYME Power Engineering Software
program. These losses are disclosed for different voltage levels and
different loading conditions.
[1] J.C. Olivares a, J. Can edo b, P. Moreno b, J. Driesen c, R. Escarela d
and S. Palanivasagam, “Analysis of Technical Loss in Distribution Line
System”, Proceedings of the 8th WSEAS International Conference on
Telecommunications and Informatics, pp. 26-30, USA, 2009.
[2] Mau Teng Au, Tashia M. Anthony, Nurhafizah Kamaruddin, Renugah
Verayiah, Sharifah A. Syed Mustaffa and Marina Yusoff, “A Simplified
Approach in Estimating Technical Losses in Distribution Network
Based on Load Profile and Feeder Characteristics”, 2nd IEEE
International Conference on Power and Energy (PECon 08), December
1-3, 2008, Johor Baharu, Malaysia.
[3] V. A. Kulkarni and P. K Katti, “Estimation of Distribution Transformer
Losses in Feeder Circuit” International Journal of Computer and
Electrical Engineering, Vol. 3, No. 5, October 2011.
[4] Amit Gupta and Ranjana Singh, “Computation of Transformer Losses
Under The Effects of Non-Sinusoidal Currents”, Advanced Computing:
An International Journal (ACIJ), Vol. 2, No.6, November 2011.
[5] S.B.Sadati, H.Yousefi, B.Darvishi and A.Tahani, "Comparison of
Distribution Transformer Losses and Capacity under Linear and
Harmonic Loads ", 2nd IEEE International Conference on Power and
Energy (PECon 08), pp. December 1-3, Johor Baharu, Malaysia, 2008.
[6] Sarang Pande and Prof. Dr. J.G. Ghodek, "Computation of Technical
Power Loss of Feeders and Transformers in Distribution System using
Load Factor and Load Loss Factor", International Journal of
Multidisciplinary Sciences And Engineering, Vol. 3, No. 6, pp. 22-25,
JUNE 2012.
[7] Pop Gabriel Vasile, Chindris Mircea, Bindiu Radu, Gecan Călin-
Octavian, Gheorghe Daniel, Vasiliu Răzvan, “Reducing Losses in
Electrical Dıstrıbutıon Systems Using Amorphous Transformers”,
Journal oF Sustaınable Energy, Vol. 1, No. 4, December, 2010.
[8] C. Kocatepe, M. Uzunoğlu, R. Yumurtacı, A. Karakas, O. Arıkan,
“Elektrik Tesislerinde Harmonikler”, Birsen Yayınevi, Istanbul, 2003.
[1] J.C. Olivares a, J. Can edo b, P. Moreno b, J. Driesen c, R. Escarela d
and S. Palanivasagam, “Analysis of Technical Loss in Distribution Line
System”, Proceedings of the 8th WSEAS International Conference on
Telecommunications and Informatics, pp. 26-30, USA, 2009.
[2] Mau Teng Au, Tashia M. Anthony, Nurhafizah Kamaruddin, Renugah
Verayiah, Sharifah A. Syed Mustaffa and Marina Yusoff, “A Simplified
Approach in Estimating Technical Losses in Distribution Network
Based on Load Profile and Feeder Characteristics”, 2nd IEEE
International Conference on Power and Energy (PECon 08), December
1-3, 2008, Johor Baharu, Malaysia.
[3] V. A. Kulkarni and P. K Katti, “Estimation of Distribution Transformer
Losses in Feeder Circuit” International Journal of Computer and
Electrical Engineering, Vol. 3, No. 5, October 2011.
[4] Amit Gupta and Ranjana Singh, “Computation of Transformer Losses
Under The Effects of Non-Sinusoidal Currents”, Advanced Computing:
An International Journal (ACIJ), Vol. 2, No.6, November 2011.
[5] S.B.Sadati, H.Yousefi, B.Darvishi and A.Tahani, "Comparison of
Distribution Transformer Losses and Capacity under Linear and
Harmonic Loads ", 2nd IEEE International Conference on Power and
Energy (PECon 08), pp. December 1-3, Johor Baharu, Malaysia, 2008.
[6] Sarang Pande and Prof. Dr. J.G. Ghodek, "Computation of Technical
Power Loss of Feeders and Transformers in Distribution System using
Load Factor and Load Loss Factor", International Journal of
Multidisciplinary Sciences And Engineering, Vol. 3, No. 6, pp. 22-25,
JUNE 2012.
[7] Pop Gabriel Vasile, Chindris Mircea, Bindiu Radu, Gecan Călin-
Octavian, Gheorghe Daniel, Vasiliu Răzvan, “Reducing Losses in
Electrical Dıstrıbutıon Systems Using Amorphous Transformers”,
Journal oF Sustaınable Energy, Vol. 1, No. 4, December, 2010.
[8] C. Kocatepe, M. Uzunoğlu, R. Yumurtacı, A. Karakas, O. Arıkan,
“Elektrik Tesislerinde Harmonikler”, Birsen Yayınevi, Istanbul, 2003.
@article{"International Journal of Electrical, Electronic and Communication Sciences:70705", author = "A. Bozkurt and C. Kocatepe and R. Yumurtaci and İ. C. Tastan and G. Tulun", title = "Loss Analysis by Loading Conditions of Distribution Transformers", abstract = "Efficient use of energy, the increase in demand of
energy and also with the reduction of natural energy sources, has
improved its importance in recent years. Most of the losses in the
system from electricity produced until the point of consumption is
mostly composed by the energy distribution system. In this study,
analysis of the resulting loss in power distribution transformer and
distribution power cable is realized which are most of the losses in
the distribution system. Transformer losses in the real distribution
system are analyzed by CYME Power Engineering Software
program. These losses are disclosed for different voltage levels and
different loading conditions.", keywords = "Distribution system, distribution transformer, power
cable, technical losses.", volume = "9", number = "8", pages = "863-4", }