Impact Modified Oil Palm Empty Fruit Bunch Fiber/Poly(Lactic) Acid Composite

In this study, composites were fabricated from oil
palm empty fruit bunch fiber and poly(lactic) acid by extrusion
followed by injection moulding. Surface of the fiber was pre-treated
by ultrasound in an alkali medium and treatment efficiency was
investigated by scanning electron microscopy (SEM) analysis and
Fourier transforms infrared spectrometer (FTIR). Effect of fiber
treatment on composite was characterized by tensile strength (TS),
tensile modulus (TM) and impact strength (IS). Furthermore,
biostrong impact modifier was incorporated into the treated fiber
composite to improve its impact properties. Mechanical testing
showed an improvement of up to 23.5% and 33.6% respectively for
TS and TM of treated fiber composite above untreated fiber
composite. On the other hand incorporation of impact modifier led to
enhancement of about 20% above the initial IS of the treated fiber
composite.

• Mohammad D. H. Beg
• John O. Akindoyo
• Suriati Ghazali
• Abdullah A. Mamun

• Fiber treatment
• impact modifier
• natural fibers
• ultrasound.

[1] K. Oksman, M. Skrifvars, and J.-F. Selin, "Natural fibres as
reinforcement in polylactic acid (PLA) composites," Composites science
and technology, vol. 63, pp. 1317-1324, 2003.
[2] S. Mohanty, S. K. Verma, S. K. Nayak, and S. S. Tripathy, "Influence of
fiber treatment on the performance of sisal–polypropylene composites,"
Journal of Applied Polymer Science, vol. 94, pp. 1336-1345, 2004.
[3] B. Bax and J. Müssig, "Impact and tensile properties of PLA/Cordenka
and PLA/flax composites," Composites Science and Technology, vol.
68, pp. 1601-1607, 2008.
[4] N. Graupner, A. S. Herrmann, and J. Müssig, "Natural and man-made
cellulose fibre-reinforced poly (lactic acid)(PLA) composites: An
overview about mechanical characteristics and application areas,"
Composites Part A: Applied Science and Manufacturing, vol. 40, pp.
810-821, 2009.
[5] M. S. Huda, L. T. Drzal, A. K. Mohanty, and M. Misra, "Effect of fiber
surface-treatments on the properties of laminated biocomposites from
poly (lactic acid)(PLA) and kenaf fibers," Composites Science and
Technology, vol. 68, pp. 424-432, 2008.
[6] L. Petersson, I. Kvien, and K. Oksman, "Structure and thermal
properties of poly (lactic acid)/cellulose whiskers nanocomposite
materials," Composites Science and Technology, vol. 67, pp. 2535-2544,
2007.
[7] M. Islam, M. Beg, A. Gupta, and M. Mina, "Optimal performances of
ultrasound treated kenaf fiber reinforced recycled polypropylene
composites as demonstrated by response surface method," Journal of
Applied Polymer Science, vol. 128, pp. 2847-2856, 2013.
[8] A. Moshiul Alam, M. Beg, D. Reddy Prasad, M. Khan, and M. Mina,
"Structures and performances of simultaneous ultrasound and alkali
treated oil palm empty fruit bunch fiber reinforced poly (lactic acid)
composites," Composites Part A: Applied Science and Manufacturing,
vol. 43, pp. 1921-1929, 2012.
[9] M. Islam, K. Pickering, and N. Foreman, "Influence of alkali treatment
on the interfacial and physico-mechanical properties of industrial hemp
fibre reinforced polylactic acid composites," Composites Part A:
Applied Science and Manufacturing, vol. 41, pp. 596-603, 2010.
[10] X. Li, L. G. Tabil, and S. Panigrahi, "Chemical treatments of natural
fiber for use in natural fiber-reinforced composites: a review," Journal of
Polymers and the Environment, vol. 15, pp. 25-33, 2007.
[11] K. Sever, M. Sarikanat, Y. Seki, G. Erkan, Ü. H. Erdoğan, and S. Erden,
"Surface treatments of jute fabric: the influence of surface characteristics
on jute fabrics and mechanical properties of jute/polyester composites,"
Industrial Crops and Products, vol. 35, pp. 22-30, 2012.
[12] M. Chowdhury, M. Beg, M. R. Khan, and M. Mina, "Modification of oil
palm empty fruit bunch fibers by nanoparticle impregnation and alkali
treatment," Cellulose, vol. 20, pp. 1477-1490, 2013.
[13] B. K. Goriparthi, K. Suman, and N. Mohan Rao, "Effect of fiber surface
treatments on mechanical and abrasive wear performance of
polylactide/jute composites," Composites Part A: Applied Science and
Manufacturing, vol. 43, pp. 1800-1808, 2012.
[14] S. K. Saw, G. Sarkhel, and A. Choudhury, "Surface modification of coir
fibre involving oxidation of lignins followed by reaction with furfuryl
alcohol: Characterization and stability," Applied Surface Science, vol.
257, pp. 3763-3769, 2011.
[15] N. Sgriccia, M. Hawley, and M. Misra, "Characterization of natural fiber
surfaces and natural fiber composites," Composites Part A: Applied
Science and Manufacturing, vol. 39, pp. 1632-1637, 2008.
[16] M. Jacob, S. Thomas, and K. Varughese, "Natural rubber composites
reinforced with sisal/oil palm hybrid fibers: Tensile and cure
characteristics," Journal of applied polymer science, vol. 93, pp. 2305-
2312, 2004.
[17] S. Joseph, K. Joseph, and S. Thomas, "Green composites from natural
rubber and oil palm fiber: physical and mechanical properties,"
International Journal of Polymeric Materials, vol. 55, pp. 925-945, 2006.
[18] A. A. Mamun, H.-P. Heim, D. H. Beg, T. S. Kim, and S. H. Ahmad,
"PLA and PP composites with enzyme modified oil palm fibre: A
comparative study," Composites Part A: Applied Science and
Manufacturing, vol. 53, pp. 160-167, 2013.
[19] A. K. Bledzki, A. A. Mamun, and M. Feldmann, "Polyoxymethylene
composites with natural and cellulose fibres: Toughness and heat
deflection temperature," Composites Science and Technology, vol. 72,
pp. 1870-1874, 2012.
[20] B. Wirjosentono, P. Guritno, and H. Ismail, "Oil palm empty fruit bunch
filled polypropylene composites," International Journal of Polymeric
Materials, vol. 53, pp. 295-306, 2004.
[21] S. Ochi, "Mechanical properties of kenaf fibers and kenaf/PLA
composites," Mechanics of materials, vol. 40, pp. 446-452, 2008.
[22] A. Rana, A. Mandal, and S. Bandyopadhyay, "Short jute fiber reinforced
polypropylene composites: effect of compatibiliser, impact modifier and
fiber loading," Composites Science and Technology, vol. 63, pp. 801-
806, 2003.