Electrical Resistivity of Subsurface: Field and Laboratory Assessment
The objective of this paper is to study the electrical
resistivity complexity between field and laboratory measurement, in
order to improve the effectiveness of data interpretation for
geophysical ground resistivity survey. The geological outcrop in
Penang, Malaysia with an obvious layering contact was chosen as the
study site. Two dimensional geoelectrical resistivity imaging were
used in this study to maps the resistivity distribution of subsurface,
whereas few subsurface sample were obtained for laboratory
advance. In this study, resistivity of samples in original conditions is
measured in laboratory by using time domain low-voltage technique,
particularly for granite core sample and soil resistivity measuring set
for soil sample. The experimentation results from both schemes are
studied, analyzed, calibrated and verified, including basis and
correlation, degree of tolerance and characteristics of substance.
Consequently, the significant different between both schemes is
explained comprehensively within this paper.
[1] Michael van Schoor, "Detection of sinkholes using 2D electrical
resistivity imaging," Journal of Applied Geophysics 50 (2002),pp. 393-
399.
[2] Ettore Cardarelli, Michele Cercato, Antonio Cerreto and Gerardina Di
Filippo, "Electrical resistivity and seismic refraction tomography to
detect buried Cavities," Geophysical Prospecting, 2009, pp. 1-11
[3] I. B. Osazuwa and E. Chii Chii, "Two-dimensional electrical resistivity
survey around the periphery of an artificial lake in the Precambrian
basement complex of northern Nigeria," Journal of Physical Sciences
Vol. 5(3), pp. 238-245, March 2010
[4] T. Dahlin," The development of DC resistivity imaging techniques,"
Computer & Geosciences 27 (2001), pp. 1019 - 1029.
[5] Vincenzo Compare, Marilena Cozzolino, "Resistivity probability
tomography imaging at the Castle of Zena, Italy," EURASIP Journal
on Image and Video Processing, Volume 2009.
[6] F.Nguyen, S. Garambois, "Image processing of 2D resistivity data for
imaging faults," Journal of Applied Geophysics 57 (2005), pp.260 -
277.
[7] P.H. Giao, S.G. Chung, " Electric imaging and laboratory resistivity
testing for geotechnical investigation of Pusan clay deposits," Journal
of Applied Geophysics 52 (2003), pp. 157 - 175.
[8] F.S. Grant, G.F. West, " Interpretation Theory in Applied Geophysics,"
Mcgraw-Hill Book Company (1965), pp. 393.
[9] Dr. M.H.Loke, Tutorial, " 2-D and 3-D electrical imaging
surveys"(2004), pp. 13.
[10] J.H. Schon, "Physical Properties of Rocks,Fundamentals And
Principles of Petrophysics, Handbook of Geophysical Exploration"
(1996), pp. 401.
[11] E.I.Parkhomenko, "Electrical Properties of Rocks," Plenum Press,
(1967), pp. 121.
[12] Pazdîrek O. & Bláha V, "Examples of resistivity imaging using ME-
100 resistivity field acquisition system." 58th EAGE conference,
Amsterdam, The Netherlands, Extended Abstracts, P050(1996).
[13] M.H loke, Ian Acworth, T. dahlin, "A comparison of smooth and
blocky inversion methods in 2D electrical imaging surveys,"
Exploration geophysics (2003) 34, pp. 182 - 187
[1] Michael van Schoor, "Detection of sinkholes using 2D electrical
resistivity imaging," Journal of Applied Geophysics 50 (2002),pp. 393-
399.
[2] Ettore Cardarelli, Michele Cercato, Antonio Cerreto and Gerardina Di
Filippo, "Electrical resistivity and seismic refraction tomography to
detect buried Cavities," Geophysical Prospecting, 2009, pp. 1-11
[3] I. B. Osazuwa and E. Chii Chii, "Two-dimensional electrical resistivity
survey around the periphery of an artificial lake in the Precambrian
basement complex of northern Nigeria," Journal of Physical Sciences
Vol. 5(3), pp. 238-245, March 2010
[4] T. Dahlin," The development of DC resistivity imaging techniques,"
Computer & Geosciences 27 (2001), pp. 1019 - 1029.
[5] Vincenzo Compare, Marilena Cozzolino, "Resistivity probability
tomography imaging at the Castle of Zena, Italy," EURASIP Journal
on Image and Video Processing, Volume 2009.
[6] F.Nguyen, S. Garambois, "Image processing of 2D resistivity data for
imaging faults," Journal of Applied Geophysics 57 (2005), pp.260 -
277.
[7] P.H. Giao, S.G. Chung, " Electric imaging and laboratory resistivity
testing for geotechnical investigation of Pusan clay deposits," Journal
of Applied Geophysics 52 (2003), pp. 157 - 175.
[8] F.S. Grant, G.F. West, " Interpretation Theory in Applied Geophysics,"
Mcgraw-Hill Book Company (1965), pp. 393.
[9] Dr. M.H.Loke, Tutorial, " 2-D and 3-D electrical imaging
surveys"(2004), pp. 13.
[10] J.H. Schon, "Physical Properties of Rocks,Fundamentals And
Principles of Petrophysics, Handbook of Geophysical Exploration"
(1996), pp. 401.
[11] E.I.Parkhomenko, "Electrical Properties of Rocks," Plenum Press,
(1967), pp. 121.
[12] Pazdîrek O. & Bláha V, "Examples of resistivity imaging using ME-
100 resistivity field acquisition system." 58th EAGE conference,
Amsterdam, The Netherlands, Extended Abstracts, P050(1996).
[13] M.H loke, Ian Acworth, T. dahlin, "A comparison of smooth and
blocky inversion methods in 2D electrical imaging surveys,"
Exploration geophysics (2003) 34, pp. 182 - 187
@article{"International Journal of Earth, Energy and Environmental Sciences:54846", author = "Zulfadhli Hasan Adli and Mohd Hafiz Musa and M. N. Khairul Arifin", title = "Electrical Resistivity of Subsurface: Field and Laboratory Assessment", abstract = "The objective of this paper is to study the electrical
resistivity complexity between field and laboratory measurement, in
order to improve the effectiveness of data interpretation for
geophysical ground resistivity survey. The geological outcrop in
Penang, Malaysia with an obvious layering contact was chosen as the
study site. Two dimensional geoelectrical resistivity imaging were
used in this study to maps the resistivity distribution of subsurface,
whereas few subsurface sample were obtained for laboratory
advance. In this study, resistivity of samples in original conditions is
measured in laboratory by using time domain low-voltage technique,
particularly for granite core sample and soil resistivity measuring set
for soil sample. The experimentation results from both schemes are
studied, analyzed, calibrated and verified, including basis and
correlation, degree of tolerance and characteristics of substance.
Consequently, the significant different between both schemes is
explained comprehensively within this paper.", keywords = "Electrical Resistivity, Granite, Soil.", volume = "4", number = "9", pages = "413-4", }