Effect of Blade Shape on the Performance of Wells Turbine for Wave Energy Conversion

The effect of a 3-dimensional (3D) blade on the turbine
characteristics of Wells turbine for wave energy conversion has been
investigated experimentally by model testing under steady flow
conditions in this study, in order to improve the peak efficiency and
stall characteristics. The aim of use of 3D blade is to prevent flow
separation on the suction surface near the tip. The chord length is
constant with radius and the blade profile changes gradually from the
mean radius to tip. The proposed blade profiles in the study are
NACA0015 from the hub to mean radius and NACA0025 at the tip.
The performances of Wells turbine with 3D blades has been compared
with those of the original Wells turbine, i.e., the turbine with
2-dimensional (2D) blades. As a result, it was concluded that although
the peak efficiency of Wells turbine can be improved by the use of the
proposed 3D blade, its blade does not overcome the weakness of
stalling.

• Katsuya Takasaki
• Manabu Takao
• Toshiaki Setoguchi

• Fluid machinery
• ocean engineering
• stall
• wave energy conversion
• Wells turbine.

[1] S. Raghunathan, “The Wells Air Turbine for Wave Energy Conversion,”
Progress in Aerospace, vol. 31, pp. 335-386, (1995).
[2] T. Setoguchi, M. Takao, K. Kaneko and M. Inoue, “Effect of Guide
Vanes on the Performance of a Wells Turbine for Wave Energy
Conversion,” International Journal of Offshore and Polar Engineering,
vol. 8, no. 2, pp. 155-160, (1998).
[3] T. Setoguchi, M. Takao, K. Kaneko, S. Raghunathan and M. Inoue,
“Study on a Wells Turbine for Wave Power Conversion: Improvement of
Performance by the Use of Porous Fences,” International Journal of
Offshore and Polar Engineering, vol. 8, no. 3, pp. 222-227, (1998).
[4] M. Takao, S. Okuhara and T. Setoguchi, “Wells Turbine for Wave Energy
Conversion -Improvement of stall characteristics by the use of
3-Dimensional Blades-“, Proceedings of 4th International Conference on
Jets, Wakes and Separated Flows, Nagoya, Japan, Paper no.
ICJWSF2013-1151, (2013).
[5] K. Kaneko, T. Setoguchi, and M. Inoue, “Performance of Wells Turbine
in Oscillating Flow”, Proc Current Practices and New Tech in Ocean
Eng, ASME, vol. 2, pp. 447-452, (1986).
[6] T. Setoguchi, K. Kaneko, and M. Inoue, Determine of Optimum
Geometry of Wells Turbine Rotor for Wave Power Generator, Proc 3rd
Symp on Ocean Wave Utilz (in Japanese), JAMSTEC, pp. 141-149,
(1986).