Effect of Biomass Feedstocks on the Production of Hydrogenated Biodiesel

Hydrogenated biodiesel is one of the most promising renewable fuels. It has many advantages over conventional biodiesel, including higher cetane number, higher heating value, lower viscosity, and lower corrosiveness due to its absence of oxygen. From previous work, Pd/TiO2 gave high conversion and selectivity in hydrogenated biodiesel. In this work, the effect of biomass feedstocks (i.e. beef fat, chicken fat, pork fat, and jatropha oil) on the production of hydrogenated biodiesel over Pd/TiO2 has been studied. Biomass feedstocks were analyzed by ICP-OES (inductively coupled plasma optical emission spectrometry) to identify the content of impurities (i.e. P, K, Ca, Na, and Mg). The deoxygenation catalyst, Pd/TiO2, was prepared by incipient wetness impregnation (IWI) and tested in a continuous flow packed-bed reactor at 500 psig, 325°C, H2/feed molar ratio of 30, and LHSV of 4 h-1 for its catalytic activity and selectivity in hydrodeoxygenation. All feedstocks gave high selectivity in diesel specification range hydrocarbons and the main hydrocarbons were n-pentadecane (n-C15) and n-heptadecane (n- C17), resulting from the decarbonylation/decarboxylation reaction. Intermediates such as oleic acid, stearic acid, palmitic acid, and esters were also detected in minor amount. The conversion of triglycerides in jatropha oil is higher than those of chicken fat, pork fat, and beef fat, respectively. The higher concentration of metal impurities in feedstock, the lower conversion of feedstock.




References:
[1] Adebanjo, A. (2005). Production of Fuels and Chemicals from Biomass
Derived Oil and Lard. Saskatchewan.
[2] Daniela, G. L., Valerio, C.D.S., Eric, B.R., Daniel, A.C., Erika, C.V.C.,
Flavia, C.R., Kleber, C M., Joel, C.R., and Paulo, A.Z.S. (2004).
Diesel-like fuel obtained by pyrolysis of vegetable oils. Journal of
Analytical and Applied Pyrolysis, 71( 2), 987-996
[3] Da Rocha Filho, G. N., Brodzki, D., and Djega-Mariadassou, G. (1993).
Formation of alkanes, alkylcycloalkanes and alkylbenzenes during the
catalytic hydrocracking of vegetable oils. Fuel, 72 (4), 544-549.
[4] De Jong, K.P. (2009). Synthesis of Solid Catalysts. Germany: Wiley-
VCH.
[5] Haber, J., Block, H., Delmon, B. (1995). Manual of methods and
procedures for catalyst characterization. Pure & Appl. Chem, 67,
1257-1306.
[6] Hague, D.C., and Mayo, M.J. (1994). Controlling crystallinity during
processing of nanocrystalline titania. Journal of the American Ceramic
Society, 77, 1957-1960.
[7] Huber, G.W., O-Connor, P., and Corma, A. (2007). Processing biomass
in conventional oil refineries: Production of high quality diesel by
hydrotreating vegetable oils in heavy vacuum oil mixtures. Applied
Catalysis A: General, 329, 120-129.
[8] Karmakar, A., Karmakar, S., Mukherjee, S. (2010). Properties of
various plants and animals feedstocks for biodiesel production.
Bioresource Technology, 101, 7201-7210.
[9] Klimmek, H. (1984). The effect of various impurities which reduce the
activity of nickel catalysts during fatty acid hydrogenation. JAOCS,
61(2), 200-204.
[10] Knothe, G., Dunn, R.O. and Bagby, M.O. (1997). Biodiesel: The Use
of Vegetable Oils and Their Derivatives as Alternative Diesel Fuels.
[11] Knothe, G. (2010) Biodiesel and renewable diesel: A comparison.
Progress in Energy and Combustion Science, 36, 364-373
[12] Kubicka, D., Horacek, J. (2011). Deactivation of HDS catalysts in
deoxygenation of vegetable oils. Applied Catalysis A: General, 394, 9-
17.
[13] Kubic kova, I., Snare, M., Eranen, K., Maki-Arvela, P., and Murzin,
D.Y. (2005). Hydrocarbons for diesel fuel via decarboxylation of
vegetable oils. Catalysis Today, 106, 197-200.
[14] Landau, M.V. (2002). Handbook of Porous Solids. Weinheim: Wiley-
VCH Verlag GmbH
[15] Maher, K.D., and Bressler, D.C. (2007). Pyrolysis of triglyceride
materials for the production of renewable fuels and chemicals.
Bioresource Technology, 98, 2351-2368.
[16] Maki-Arvela, P., Kubic kova, I., Snare, M., Eranen, K., and Murzin,
D.Y. (2007). Catalytic deoxygenation of fatty acids and their
derivatives. Energy & Fuels, 21, 30-41.
[17] Marchetti, J.M., Miguel, V.U., and Errazu, A.F. (2007). Possible
methods for biodiesel production. Renewable and Sustainable Energy
Reviews, 11, 1300-1311.
[18] Murugesan, A., Umarani, C., Subramanian, R., Nedunchezhian, N.
(2009). Bio-diesel as an alternative fuel for diesel enginesÔÇöA review.
Renewable and Sustainable Energy Reviews, 13, 653-662.
[19] Neimark, A.V., Kheifets, L.I. and Fenelonov, V.B. (1981). Theory of
preparation of supported catalysts. Industrial and Engineering
Chemistry Product Research and Development, 20(3), 439-450.
[20] Smith, S., Gill, CA., Lunt, DK., Matthew, DK. (2009). Regulation of
fat and fatty acid composition in beef cattle. Asian-Australasian Journal
of Animal Sciences Article, 22(9), 1225-1233.
[21] Snare, M., Kubic kova, I., Maki-Arvela, P., Chichova, D., Eranen, K.,
and Murzin, D.Y. (2006). Heterogeneous catalytic deoxygenation of
stearic acid for production of biodiesel. Industrial and Engineering
Chemistry Research, 45(2), 5708-5715.
[22] Snare, M., Kubic kova, I., Maki-Arvela, P., Chichova, D., Eranen, K.,
and Murzin, D.Y. (2007). Catalytic deoxygenation of unsaturated
renewable feedstocks for production of diesel fuel hydrocarbons. Fuels.
87(6), 933-945.
[23] Snare, M., Kubic kova, I., Maki-Arvela, P., Chichova, D., Eranen, K.,
and Murzin, D.Y. (2007). Production of diesel fuel from renewable
feeds: kinetics of ethyl stearate decarboxylation. Chemical Engineering
Journal, 134(1-3), 29-34.
[24] Srivastava, A., and Prasad, R. (2000). Triglycerides-based diesel fuels.
Renewable and Sustainable Energy Reviews, 4, 111-133.
[25] Stumborg, M., Wongb, A., and Hogan, E. (1996). Hydroprocessed
vegetable oils for diesel fuel improvement. Bioresource and technology,
56, 13-18.
[26] Zhang, Y., Dube, M.A., McLean, D.D., and Kates M. (2003). Biodiesel
production from waste cooking oil: 1. Process design and technological
assessment. Bioresource Technology, 89, 1-16.