Characterization of Catalagzi Fly Ash for Heavy Metal Adsorption

Fly ash is a significant waste that is released of thermal power plants and defined as very fine particles that are drifted upward with up taken by the flue gases due to the burning of used coal [1]. The fly-ash is capable of removing organic contaminants in consequence of high carbon content, a large surface area per unit volume and contained heavy metals. Therefore, fly ash is used as an effective coagulant and adsorbent by pelletization [2, 3]. In this study, the possibility of use of fly ash taken from Turkey like low-cost adsorbent for adsorption of zinc ions found in waste water was investigated. The fly ash taken from Turkey was pelletized with bentonite and molass to evaluate the adsorption capaticity. For this purpose; analyses such as sieve analysis, XRD, XRF, FTIR and SEM were performed. As a result, it was seen that pellets prepared from fly ash, bentonite and molass would be used for zinc adsorption.




References:
[1] A. Bilodeau and V.M. Malhotra, "High-volume fly ash system. Concrete
solution for sustainable development", ACI Mater.J., vol. 97, pp. 41-49, 2000.
[2] G.E. Johnson, L.M. Kunka and J.H. Field, "Use of coal an fly ash as adsorbents for removing organic contaminants from secondary
municipal effluents", Ind. Eng. Chem. Proc. D. D., vol. 4(3), pp. 323-327, 1965.
[3] P.K. Deb, A.J. Rubin, A.W. Launder and K.H. Mancy, "Removal of COD from Wastewater by Fly Ash", Proceedings of 21st. Ind. Waste Conf., Purdue Univ., Indiana, vol. 121, 1967, pp. 848-860.
[4] H. Polat and D. Erdogan, "Heavy metal removal from waste waters by
ion flotation", J Hazard Mater., vol. 148, pp. 267-273, 2007.
[5] M.J. González-Muñoza, M.A. Rodríguez, S. Luquea and J.R. Álvarez,
"Recovery of heavy metals from metal industry waste waters by
chemical precipitation and nanofiltration", Desalination, vol. 200, pp.
742-744, 2006.
[6] S. Mohan and R. Gandhimathi, "Removal of heavy metal ions from
municipal solid waste leachate using coal fly ash as an adsorbent". J
Hazard Mater., vol. 169(1-3), pp. 351-359, 2009.
[7] M. Ahmaruzzaman, "Adsorption of phenolic compounds on low-cost
adsorbents: A review", Colloids Surfaces Sci., vol. 143, pp. 48-67, 2008.