Simulation on Influence of Environmental Conditions on Part Distortion in Fused Deposition Modelling

Fused Deposition Modelling (FDM) is one of the additive manufacturing techniques that has become highly attractive in the industrial and academic sectors. However, parts fabricated through FDM are highly susceptible to geometrical defects such as warpage, shrinkage, and delamination that can severely affect their function. Among the thermoplastic polymer feedstock for FDM, semi-crystalline polymers are highly prone to part distortion due to polymer crystallization. In this study, the influence of FDM processing conditions such as chamber temperature and print bed temperature on the induced thermal residual stress and resulting warpage are investigated using 3D transient thermal model for a semi-crystalline polymer. The thermo-mechanical properties and the viscoelasticity of the polymer, as well as the crystallization physics which considers the crystallinity of the polymer, are coupled with the evolving temperature gradient of the print model. From the results it was observed that increasing the chamber temperature from 25 °C to 75 °C leads to a decrease of 3.3% residual stress and increase of 0.4% warpage, while decreasing bed temperature from 100 °C to 60 °C resulted in 27% increase in residual stress and a significant rise of 137% in warpage. The simulated warpage data are validated by comparing it with the measured warpage values of the samples using 3D scanning.





References:
[1] N. Yu, X. Sun, Z. Wang, D. Zhang, and J. Li, ‘Effects of auxiliary heat on warpage and mechanical properties in carbon fiber/ABS composite manufactured by fused deposition modeling’, Mater. Des., vol. 195, p. 108978, Jul. 2020, doi: 10.1016/j.matdes.2020.108978.
[2] M. Spoerk, C. Holzer, and J. Gonzalez-Gutierrez, ‘Material extrusion-based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage’, Journal of Applied Polymer Science. 2019.
[3] Y. Zhang and K. Chou, ‘A parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysis’, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., vol. 222, no. 8, pp. 959–967, 2008, doi: 10.1243/09544054JEM990.
[4] B. Courter, V. Savane, J. Bi, S. Dev, and C. J. Hansen, ‘Finite Element Simulation of the Fused Deposition Modelling Process Modelling Process’, no. June, 2017.
[5] N. Brahmia, P. Bourgin, M. Boutaous, and D. Garcia, ‘Numerical simulation with “Comsol Multiphysics” of crystallization kinetics of semi-crystalline polymer during cooling: Application to injection moulding’, Comsol Users Conf., no. 2, pp. 1–7, 2006, (Online). Available: http://www.comsol.eu/papers/1575/download/Brahmia.pdf.
[6] A. Levy, ‘A Novel Physics Node for Nakamura Crystallization Kinetics’, Int. J. Numer. Methods Eng., no. November, 2016, doi: 10.1002/nme.
[7] E. Koscher and R. Fulchiron, ‘Influence of shear on polypropylene crystallization: Morphology development and kinetics’, Polymer (Guildf)., vol. 43, no. 25, pp. 6931–6942, 2002, doi: 10.1016/S0032-3861(02)00628-6.
[8] H. Li, T. Wang, J. Sun, and Z. Yu, ‘The effect of process parameters in fused deposition modelling on bonding degree and mechanical properties’, Rapid Prototyp. J., vol. 24, no. 1, pp. 80–92, 2018, doi: 10.1108/RPJ-06-2016-0090.
[9] A. B. Robbins and A. J. Minnich, ‘Crystalline polymers with exceptionally low thermal conductivity studied using molecular dynamics’, Appl. Phys. Lett., vol. 107, no. 20, 2015, doi: 10.1063/1.4936195.
[10] A. El Moumen, M. Tarfaoui, and K. Lafdi, ‘Modelling of the temperature and residual stress fields during 3D printing of polymer composites’, Int. J. Adv. Manuf. Technol., pp. 1661–1676, 2019, doi: 10.1007/s00170-019-03965-y.
[11] R. T. L. Ferreira and R. Quelho de Macedo, ‘Residual thermal stress in fused deposition modelling’, no. March, 2018, doi: 10.26678/abcm.cobem2017.cob17-0124.
[12] T. Koslowski and C. Bonten, ‘Shrinkage, warpage and residual stresses of injection molded parts’, AIP Conf. Proc., vol. 2055, no. January, 2019, doi: 10.1063/1.5084847.