Performance Prediction of a SANDIA 17-m Vertical Axis Wind Turbine Using Improved Double Multiple Streamtube

Different approaches have been used to predict the performance of the vertical axis wind turbines (VAWT), such as experimental, computational fluid dynamics (CFD), and analytical methods. Analytical methods, such as momentum models that use streamtubes, have low computational cost and sufficient accuracy. The double multiple streamtube (DMST) is one of the most commonly used of momentum models, which divide the rotor plane of VAWT into upwind and downwind. In fact, results from the DMST method have shown some discrepancy compared with experiment results; that is because the Darrieus turbine is a complex and aerodynamically unsteady configuration. In this study, analytical-experimental-based corrections, including dynamic stall, streamtube expansion, and finite blade length correction are used to improve the DMST method. Results indicated that using these corrections for a SANDIA 17-m VAWT will lead to improving the results of DMST.





References:
[1] S. L. Dixon and C. A. Hall, Wind Turbines. 2010.
[2] A. ElCheikh, M. Elkhoury, T. Kiwata, and T. Kono, “Performance analysis of a small-scale Orthopter-type Vertical Axis Wind Turbine,” J. Wind Eng. Ind. Aerodyn., vol. 180, no. July, pp. 19–33, 2018.
[3] P. Jain and A. Abhishek, “Performance prediction and fundamental understanding of small scale vertical axis wind turbine with variable amplitude blade pitching,” Renew. Energy, vol. 97, pp. 97–113, 2016.
[4] M. Khalid Saeed, A. Salam, A. U. Rehman, and M. Abid Saeed, “Comparison of six different methods of Weibull distribution for wind power assessment: A case study for a site in the Northern region of Pakistan,” Sustain. Energy Technol. Assessments, vol. 36, no. May, p. 100541, 2019.
[5] Z. Zhao et al., “Study on variable pitch strategy in H-type wind turbine considering effect of small angle of attack,” J. Renew. Sustain. Energy, vol. 9, no. 5, 2017.
[6] I. Hui, B. E. Cain, and J. O. Dabiri, “Public receptiveness of vertical axis wind turbines,” Energy Policy, vol. 112, no. October 2017, pp. 258–271, 2018.
[7] G. E. Brandvold, “Vertical Axis Wind Turbine Status,” Sun Mankind’s Futur. Source Energy, no. October, pp. 1843–1847, 2013.
[8] M. Douak, Z. Aouachria, R. Rabehi, and N. Allam, “Wind energy systems: Analysis of the self-starting physics of vertical axis wind turbine,” Renew. Sustain. Energy Rev., vol. 81, no. March, pp. 1602–1610, 2018.
[9] G. Bangga, T. Lutz, A. Dessoky, and E. Krämer, “Unsteady Navier-Stokes studies on loads, wake, and dynamic stall characteristics of a two-bladed vertical axis wind turbine,” J. Renew. Sustain. Energy, vol. 9, no. 5, 2017.
[10] Q. Li, T. Maeda, Y. Kamada, Y. Hiromori, A. Nakai, and T. Kasuya, “Study on stall behavior of a straight-bladed vertical axis wind turbine with numerical and experimental investigations,” J. Wind Eng. Ind. Aerodyn., vol. 164, no. February, pp. 1–12, 2017.
[11] K. H. Wong, W. T. Chong, N. L. Sukiman, S. C. Poh, Y. C. Shiah, and C. T. Wang, “Performance enhancements on vertical axis wind turbines using flow augmentation systems: A review,” Renew. Sustain. Energy Rev., vol. 73, no. June 2016, pp. 904–921, 2017.
[12] H. Y. Peng, H. F. Lam, and H. J. Liu, “Power performance assessment of H-rotor vertical axis wind turbines with different aspect ratios in turbulent flows via experiments,” Energy, 2019.
[13] W. Wang, J. Wang, and W. T. Chong, “The effects of unsteady wind on the performances of a newly developed cross-axis wind turbine: A wind tunnel study,” Renew. Energy, 2018.
[14] Y. Wu, H. Lin, and J. Lin, “Certification and testing technology for small vertical axis wind turbine in Taiwan,” Sustain. Energy Technol. Assessments, vol. 31, no. November 2018, pp. 34–42, 2019.
[15] J. Kjellin, F. Bülow, S. Eriksson, P. Deglaire, M. Leijon, and H. Bernhoff, “Power coefficient measurement on a 12 kW straight bladed vertical axis wind turbine,” Renew. Energy, vol. 36, no. 11, pp. 3050–3053, 2011.
[16] Y. Wang, H. Tong, H. Sima, J. Wang, and J. Sun, “Experimental study on aerodynamic performance of deformable blade for vertical axis wind turbine,” Energy, vol. 181, pp. 187–201, 2019.
[17] L. Battisti et al., “Experimental benchmark data for H-shaped and troposkien VAWT architectures,” Renew. Energy, vol. 125, pp. 425–444, 2018.
[18] B. Zouzou, I. Dobrev, F. Massouh, and R. Dizene, “Experimental and numerical analysis of a novel Darrieus rotor with variable pitch mechanism at low TSR,” Energy, vol. 186, p. 115832, 2019.
[19] I. Paraschivoiu, “Aerodynamic Loads and Performance of the Darrieus Rotor.,” J Energy, vol. V 6, no. N 6, pp. 406–412, 1982.
[20] I. Paraschivoiu and F. Delclaux, “Double multiple streamtube model with recent improvements (for predicting aerodynamic loads and performance of Darrieus vertical axis wind turbines),” J. Energy, vol. 7, no. 3, pp. 250–255, 1983.
[21] I. Paraschivoiu, O. Trifu, and F. Saeed, “H-Darrieus wind turbine with blade pitch control,” Int. J. Rotating Mach., vol. 2009, 2009.
[22] G. Bangga, A. Dessoky, T. Lutz, and E. Kr, “Improved double-multiple-streamtube approach for H-Darrieus vertical axis wind turbine computations,” vol. 182, pp. 673–688, 2019.
[23] “Paraschivoiu I.-Wind Turbine Design_ With Emphasis on Darrieus Concept.”
[24] D. E. Berg, “Improved double-multiple streamtube model for the Darrieus-type vertical axis wind turbine,” Sol. Energy Soc, 1983.
[25] M. Ahmadi-Baloutaki, R. Carriveau, and D. S. K. Ting, “Straight-bladed vertical axis wind turbine rotor design guide based on aerodynamic performance and loading analysis,” Proc. Inst. Mech. Eng. Part A J. Power Energy, vol. 228, no. 7, pp. 742–759, 2014.