Numerical Analysis of the Performance of a Shrouded Vertical-Axis Water Turbine based on the NACA 0025 Blade Profile

This paper presents a numerical analysis of the performance of a five-bladed Darrieus vertical-axis water turbine, based on the NACA 0025 blade profile, for both bare and shrouded configurations. A complete campaign of 2-D simulations, performed for several values of tip speed ratio and based on RANS unsteady calculations, has been performed to obtain the rotor torque and power curves. Also the effect of a NACA-shaped central hydrofoil has been investigated, with the aim of evaluating the impact of a solid blockage on the performance of the shrouded rotor configuration. The beneficial effect of the shroud on rotor overall performances has clearly been evidenced, while the adoption of the central hydrofoil has proved to be detrimental, being the resulting flow slow down (due to the presence of the obstacle) much higher with respect to the flow acceleration (due to the solid blockage effect).

Authors:

• M. Raciti Castelli
• S. De Betta
• E. Benini

Keywords:

• CFD
• vertical axis water turbine
• shroud
• NACA 0025

References:

[1] D. L. F. Gaden and E. L. Bibeau, "A numerical investigation into the
effect of diffusers on the performance of hydro kinetic turbines using a
validated momentum source turbine", Journal of Renewable Energy 35,
pp. 1152-1158, 2010.
[2] M. J. Khan, G. Bhuyan, M. T. Iqbal and J. E. Quaicoe, "Hydrokinetic
energy conversion systems and assessment of horizontal and vertical
axis turbines for river and tidal applications: A technology status
review", Journal of Applied Energy 86, pp. 1823-1835, 2009.
[3] S. Bernard, A. Georgescu, S. C. Georgescu, R. Susan-Resigaand and I.
Anton, "Flow investigation in Achard turbine", Proceeding of the
Romanin Academi, Series A, Volume 9, November, 2008.
[4] M. J. Khan, M. T. Iqbal and J. E. Quaicoe, "A technology review and
simulation based performance analysis of river current turbine", IEEE
CCECE/CCGEI, Ottawa, May 2006.
[5] B. Kirke, "Developments in ducted water current turbines", Tidal paper,
25 April 2006.
[6] A. M. Roa, V. Aumelas, T. Maitre and C. Pellone, "Numerical and
experimental analysis of a Darriues-type cross flow water turbine in bare
and shrouded configurations", IOP Conf. Series: Earth and
Environmental Science 12, 2010.
[7] Maitre, T., Mentxaka Roa, A., Pellon,e C., Achard, J. L., "Numerical 2D
hydrodynamic optimization of channeling devices for cross-flow water
turbines", U.P.B. Sci: Bull. Series D, Vol. 72, Iss.1, 2010.
[8] S. Ferreira, H. Bijl, G. van Bussel and G. van Kuik, "Simulating
dynamic stall in a 2D VAWT: modeling strategy, verification and
validation with particle image velocimetry data", The Science of making
torque from wind. Journal of Physics: Conference Series 75, 2007.
[9] Fluent Inc., Fluent User-s Manual, 2006.
[10] R. M. Cummings, J. R. Forsythe, S. A. Morton and K. D. Squires,
"Computational challenges in high angle of attack flow prediction",
Prog Aerospace Sci, 2003.
[11] M. Mc Mullen, A. Jameson and J. J. Alonso, "Acceleration of
convergence to a periodic steady state in turbomachinery flows", 39th
AIAA aerospace sciences meeting & exhibit. Reno, NV: AIAA; January
8-11 2001.
[12] M. Raciti Castelli, A. Englaro and E. Benini, "The Darrieus wind
turbine: Proposal for new performance prediction model based on
CFD", Energy, Volume 36, Issue 8, August 2011.
[13] G. H. Yu, X. C. Zhu and Z. H. Du, "Numerical simulation of a wind
turbine airfoil: dynamic stall and comparison with experiments", Power
and Energy Journal, Vol. 224, 2010.
[14] M. Raciti Castelli, S. De Betta and E. Benini, "Proposal for a Means for
reducing the Torque Variation on a Vertical-Axis Water Turbine by
Increasning the Blade Number", submitted ICAMAME 2012:
International Conference on Aerospace, Mechanical, Automotive and
Materials Engineering, Venice (Italy), April 11-13, 2012.