Microstructural and Electrochemical Investigation of Carbon Coated Nanograined LiFePO4 as Cathode Material for Li-Batteries

Lithium iron phosphate (LiFePO₄) is a potential cathode material for lithium-ion batteries due to its promising characteristics. In this study, pure LiFePO₄ (LFP) and carbon-coated nanograined LiFePO₄ (LFP-C) is synthesized and characterized for its microstructural properties. X-ray diffraction patterns of the synthesized samples can be indexed to an orthorhombic LFP structure with about 63 nm crystallite size as calculated by using Scherrer’s equation. Agglomerated particles that range from 200 nm to 300 nm are observed from scanning electron microscopy images. Transmission electron microscopy images confirm the crystalline structure of LFP and coating of amorphous carbon layer. Elemental mapping using energy dispersive spectroscopy analysis revealed the homogeneous dispersion of the compositional elements. In addition, galvanostatic charge and discharge measurements were investigated for the cathode performance of the synthesized LFP and LFP-C samples. The results showed that the carbon-coated sample demonstrated the highest capacity of about 140 mAhg^-1 as compared to non-coated and micrograined sized commercial LFP.

• Rinlee Butch M. Cervera
• Princess Stephanie P. Llanos

• Ceramics
• microstructure
• electrochemical measurements
• energy storage
• transmission electron microscope.

[1] J.M. Tarascon, “Key Challenges in Future Li-battery Research”, Philosophical Transactions of the Royal Society A, 368, 2010, 3227-3241.
[2] C.P. Garrido, R.B. Cervera, “Synthesis of Amorphous Fe-doped SiO2 Anode Nanomaterial via Sol-gel Method”, Advanced Materials Research, 1119, 2015, 38-42.
[3] F. Yu, L. Zhang, Y. Li, Y. An, M. Zhu, B. Dai, “Mechanism studies of LiFePO4 cathode material: lithiation/delithiation process, electrochemical modification and synthetic reaction. Royal Society of Chemistry”, 4 (2014) 54576-54602.
[4] Y. Huang, H. Ren, Z. Peng, Y. Zhou, “Synthesis of LiFePO4/carbon composite from nano-FePO4 by a novel stearic acid assisted rheological phase method”, Electrochimica Acta, 55 (2009) 311-315.
[5] K. Bazzi, B.P. Mandal, M. Nazri, V.M. Naik, V.K. Garg, A.C Oliveira, P.P Vaishnava, G.A. Nazri, R. Naik, “Effect of surfactants on the electrochemical behavior of LiFePO4 cathode material for lithium ion batteries”, Journal of Power Sources, 265 (2014) 67-74.
[6] X. Zhi, G. Liang, L. Wang, X. Ou, L. Gao, X. Jie, “Optimization of carbon coatings on LiFePO4: Carbonization temperature and carbon content”, Journal of Alloys and Compounds, 503 (2010) 370-374.
[7] C. Miao, P. Bai, Q. Jiang, S. Sun, X. Wang, “A novel synthesis and characterization of LiFePO4 and LiFePO4/C as a cathode material for lithium-ion battery”, Journal of Power Sources, 246 (2014) 232-238.
[8] Xu, P. Wang, B. Shen, “Synthesis and Characterization of sulfur-doped carbon decorated LiFePO4 nanocomposite as high performance cathode material for lithium-ion batteries”, Ceramics International, 42 (2016) 5331-5338.
[9] Y. Huang, H. Ren, Z. Peng, Y. Zhou, “Synthesis of LiFePO4/carbon composite from nano-FePO4 by a novel stearic acid assisted rheological phase method”, Electrochimica Acta, 55, 2009, 311-315.
[10] X. Zhi, G. Liang, L. Wang, X. Ou, L. Gao, X. Jie, “Optimization of carbon coatings on LiFePO4: Carbonization temperature and carbon content”, Journal of Alloys and Compounds, 503, 2010, 370-374.
[11] C. Miao, P. Bai, Q. Jiang, S. Sun, X. Wang, “A novel synthesis and characterization of LiFePO4 and LiFePO4/C as a cathode material for lithium-ion battery”, Journal of Power Sources, 246, 2014, 232-238.