High-performance Second-Generation Controlled Current Conveyor CCCII and High Frequency Applications

In this paper, a modified CCCII is presented. We have used a current mirror with low supply voltage. This circuit is operated at low supply voltage of ±1V. Tspice simulations for TSMC 0.18μm CMOS Technology has shown that the current and voltage bandwidth are respectively 3.34GHz and 4.37GHz, and parasitic resistance at port X has a value of 169.320 for a control current of 120μA. In order to realize this circuit, we have implemented in this first step a universal current mode filter where the frequency can reach the 134.58MHz. In the second step, we have implemented two simulated inductors: one floating and the other grounded. These two inductors are operated in high frequency and variable depending on bias current I0. Finally, we have used the two last inductors respectively to implement two sinusoidal oscillators domains of frequencies respectively: [470MHz, 692MHz], and [358MHz, 572MHz] for bias currents I0 [80μA, 350μA].





References:
[1] A. Fabre, O, Saaid and al, "High-frequency high-Q BiCMOS current mode bandpass filter and mobile communication application”. IEEE journal of solid-state Circuits, August 2002; vol 33, no 3, pp.614-625. [2] Ahmed M Soliman, " Current mode filters using two output inverting CCII”, International journal of circuit Theory and applications. October 2008; vol 36, no7, pp.875–881 [3] Sudhanshu Maheshwari and Iqbal A. Khan, "Novel cascadable current- mode translinear-C universal filter”, Active and Passive Electronic Components, December 2004; vol 27 no 4, pp. 215-218. [4] Neeta Pandey and al, "Realization of Generalized Mixed Mode Universal Filter Using CCCIIs”, Journal of Active and Passive Electronic Devices, 2009; vol 55, no 3, pp.279-293. [5] H. P. Chen and P. L. Chu, "Versatile universal electronically tunable current-mode filters using CCCIIs”, IEICE Electron Express, 2009; vol. 6, no 2, pp.122-128. [6] Ozcan.S, Toker.A and al. "Single resistance controlled sinusoidal oscillators employing current differencing buffered amplifier", Microelectronics Journal (International), 2000, vol31, no 3, pp.169-174. [7] Chunhuna Wang, Yan Zhao and al. "A New Current Mode SIMO Type Universal Biquad employing Multi-Output Current Conveyors (MOCCIIs)”, Radio engineering, April 2009, vol 18, no 1, pp.83-88. [8] Samir ben Salem, Mourad Fakhfakh and al. "A high performances CMOS CCII and high frequency application”, Analog Integrated Circuit and Signal Processing, April 2006, vol 49, no 1, pp. 71-78 [9] Ercan Altuntas and Ali Toker, "Realization of voltage and current mode KHN biquads using CCCIIs”, International Journal of electronics and communications, January 2002, vol 56, no 1, pp. 45-49.
[10] Sinem Oztayfun, Selcuk Kiinc and Aem Celebi, "A new electronically tunable phase shifter employing current–controlled current conveyors", AEU-International journal of Electronics and communications, March 2008, vol 62, no 3, pp.228-231. [11] Hervé Barthelemy, Matthieu Fillaud and al, "CMOS inverters based positive type second generation current conveyors”, Analog Integrated Circuit and Signal Processing, February 2007, vol 50, no 2, pp.41-146.. [12] Torralba A, Carvajal RG and al. "New output stage for low supply voltage high performance CMOS current mirrors”, Circuits and Systems, 2003 ISCAS '03. Proceedings of the 2003, 20 Jun 2003, vol 1, pp.269–272 [13] Sauerbrey J, Wang J and al. "A 0.6V multi-VT current mirror differential OTA”, International Symposium on Signals. Circuits and Systems (ICECS), August 2005,vol 1, pp.279-282. [14] Néjib Hassen, Houda Bdiri Gabbouj and Kamel Besbes, "Low-voltage high-performance current mirrors Application to linear voltage-to-current converter”, International Journal of circuit Theory and Applications, January 2011;vol 39,no 1, pp.47-60. [15] Maneesha Gupta, Prashant Aggarwal and al., "Low voltage current mirrors with enhanced bandwidth”, Analog Integrated Circuit and Signal Processing, 2009,vol 52, no 7, pp.1276-1279. [16] A. Fabre, H. Amrani and H.Barthelemy, "Novel class AB first generation current conveyor”, Circuits and Systems II: Analog and Digital Signal Processing IEEE, 06 August 2002;, vol 46, no 1, pp 96-98. [17] M.Higashinura and M.Fukui, "Novel method of realizing higher order immittance function using current conveyor”, circuit and system IEEE international, 1998. [18] Kimmo Kilo, "CMOS current amplifiers speed versus Nonlinearity”, Thesis Helsinki University of Technology; November 2000. [19] Giuseppe Ferri and Nicol Guerri, "High-valued passive element simulation using low-voltage low-power current conveyors for fully integrated applications”, Circuits and Systems II: Analog and Digital Signal Processing, IEEE, August 2002, vol 48, no. 4. [20] The MOSIS service, "Wafer electrical test dada and spice model parameters” http://www.mosis.org/test/ [21] Shen-IUAN and JIIN-LONG LEE, "Voltage-mode universal filters using two current Conveyors”, International Journal of Electronic, 1997, vol 82 no 2, pp145-149. [22] Kazuhiro Nakai and Gaushi Yamamoto, "Universal biquadratic filters using current conveyors”, electronics and communication. Analog Integrated Circuit and Signal Processing, May 2005, vol 31,no 3, pp. 1-16. [23] Erkan Yuce and Shahran Minaei, "Universal current-mode filters and parasitic impedance effects on the filter performances”, International journal of circuit Theory and applications, March 2008, vol 36, no 2. [24] Ahmed M Soliman, "Voltage mode and current mode tow Thomas bi-quadratic filters using inverting CCII”, International journal of circuit Theory and applications, July 2007; vol 35, no 4.
[25] An Jerabek and kamil Vrba, "SIMO type Low-Input and High-Output impedance current mode universal filter employing three universal current conveyors”, AEU - International Journal of Electronics and Communications, March 2009, vol 64, no 6, pp 588-593. [26] Jiun-Wei Horng Chun-Li Hou, "Current-Mode Universal Biquadratic Filter with Five Inputs and Two Outputs Using Two Multi-Output CCIIs”, Circuits, Systems, and Signal Processing; vol 28, no 5, pp 781–792. [27] Ahmed M. Soliman, "Current-Mode Universal Filters Using Current Conveyors Classification and Review”, Circuits, Systems, and Signal Processing, 2008, vol 27, no 3, pp 405-427.
[28] Neeta Pandey and Sajal K.Paul, "A new electronically tunable current mode universal filter using MO-CCCII”, Analog Integrated Circuit and Signal Processing, February 2009, vol 58, no 2, pp 171-178. [29] E. Tlelo-Cuautle1 and al. "Symbolic analysis of (MO)(I)CCI(II)(III)-based analog circuits”, International journal of circuit Theory and applications, 2009. [30] Antonio.J, Lopez Martin and al. "A proposal for high-performance CCII-based analogue CMOS design”, International journal of circuit Theory and applications, 2005, vol 33, no 5, pp 379-391. [31] George Souliotis and Ioannis Haritantis, "Current-mode filters based on current mirror arrays”, International journal of circuit Theory and applications, 2008, vol 36, no 2, pp 173-183. [32] Ahmed M. Soliman, "The CCII+ and the ICCII as basic building blocks in low-pass filter realizations”, International journal of circuit Theory and applications, 2008, vol 36, no 4, pp 493–509 [33] Dorra Sellami Masmoudi and Nadhmia Bouaziz El Feki, "A high frequency CCII based tunable floating inductance and current-mode band pass filter application”, Journal of Applied Science, 2005, vol 5, no 8, pp 1445-1451. [34] Ahmed Soliman, "On the realization of floating inductors”, Nature and Science, 2010, vol 8, no 5, pp 167-180. [35] H. Sedel M. Sagbas and C.Acar, "Current controllable fully integrated inductor simulator using CCCIIs”, International journal of electronics, May 2008, vol 95, no 4, pp 425-429. [36] Erkan Yuce and Shahram Minaei, "On the Realization of Simulated Inductors with Reduced Parasitic Impedance Effects”, Circuits, Systems, and Signal Processing, 2009, vol 28, no 3, pp 451–465. [37] Chun-Li Hou and Wei-Yu Wang, "Higher-order immittance functions using current Conveyors”, Analog Integrated Circuit and Signal Processing, November 2009, vol 61, no 2, pp 205-209. [38] Guillerms Ganzalez, "Foundations of Oscillator Circuit Design”, Publication, Society Mathematique in France, Paris, 2007, Book, ISBN: 2856292585. [39] A.S.Elwakil, S.Ozoguz and K.N.Solama, "Ring oscillator structures with explicitly separated nonlinearity”, International journal of circuit Theory and applications, 11 Jun 2010. [40] Mehmet Discigil, Ali toler and al. "New Oscillator Topologies Using Inverting Second-Generation Current Conveyors”, Turkish Journal of Electrical Engineering & Computer Sciences, 2002, vol 10, no 1.. [41] Erkan Yuce and Oguzhan Cicekoglu, "The Effects of Non-Idealities and Current Limitations on the Simulated Inductances Employing Current Conveyors”, Analog Integrated Circuits and Signal Processing, February 2006, vol 46 no 2, pp 103–110.