Does Material Choice Drive Sustainability of 3D Printing?

Environmental impacts of six 3D printers using
various materials were compared to determine if material choice
drove sustainability, or if other factors such as machine type, machine
size, or machine utilization dominate. Cradle-to-grave life-cycle
assessments were performed, comparing a commercial-scale FDM
machine printing in ABS plastic, a desktop FDM machine printing in
ABS, a desktop FDM machine printing in PET and PLA plastics, a
polyjet machine printing in its proprietary polymer, an SLA machine
printing in its polymer, and an inkjet machine hacked to print in salt
and dextrose. All scenarios were scored using ReCiPe Endpoint H
methodology to combine multiple impact categories, comparing
environmental impacts per part made for several scenarios per
machine. Results showed that most printers’ ecological impacts were
dominated by electricity use, not materials, and the changes in
electricity use due to different plastics was not significant compared
to variation from one machine to another. Variation in machine idle
time determined impacts per part most strongly. However, material
impacts were quite important for the inkjet printer hacked to print in
salt: In its optimal scenario, it had up to 1/38th the impacts coreper
part as the worst-performing machine in the same scenario. If salt
parts were infused with epoxy to make them more physically robust,
then much of this advantage disappeared, and material impacts
actually dominated or equaled electricity use. Future studies should
also measure DMLS and SLS processes / materials.

• Jeremy Faludi
• Zhongyin Hu
• Shahd Alrashed
• Christopher Braunholz
• Suneesh Kaul
• Leulekal Kassaye

• 3D printing
• Additive Manufacturing
• Sustainability
• Life-cycle assessment
• Design for Environment.

[1] 3D Hubs. “Trend Report June,” Accessed 13 Jun 2014 from
http://www.3dhub s.com/trends/2014-june.
[2] D. Freedman, "Layer by layer," Technology Review 115.1, pp. 50-53,
2012.
[3] C. Reynders, “3D printers create a blueprint for future of sustainable
design and production,” The Guardian, Friday 21 March 2014. Accessed
Sep 15 2014 from http://www.theguardian.com/sustainable-business/3dprinting-
blueprint-future-sustainable-design-production .
[4] M. Huijbregts et al., “Ecological footprint accounting in the life cycle
assessment of products,” Ecological Economics 64.4, pp. 798-807, 2008.
[5] R. Armstrong, “Is There Something Beyond ‘Outside of the Box’?”
Architectural Design 81.6, pp. 130-133, 2011.
[6] J. Faludi, C. Bayley, M. Iribane, S. Bhogal, “Comparing Environmental
Impacts of Additive Manufacturing vs. Traditional Machining via Life-
Cycle Assessment,” Journal of Rapid Prototyping.to be published 2015.
[7] J. Faludi, R. Ganeriwala, B. Kelly, T. Rygg, T. Yang, “Sustainability of
3D Printing vs. Machining: Do Machine Type & Size Matter?”
Accepted for publication in Proceedings of EcoBalance Conference,
Japan 2014.
[8] D. Southerland, P. Walters, and D. Huson, “Edible 3D printing,” NIP &
Digital Fabrication Conference, Vol. 2011 No. 2, Society for Imaging
Science and Technology, 2011.
[9] T. Anderson and J. Bredt, “Method of three dimensional printing,” U.S.
Patent No. 5,902,441, 11 May 1999. [10] H. Lipson and M. Kurman, Fabricated: The new world of 3D printing,
John Wiley & Sons, 2013.
[11] P. Mognol et al., “Rapid prototyping: energy and environment in the
spotlight,” Rapid Prototyping Journal 12.1, pp. 26-34, 2006.
[12] M. Baumers et al. “Sustainability of additive manufacturing: measuring
the energy consumption of the laser sintering process,” Proceedings of
the Institution of Mechanical Engineers, Part B: Journal of Engineering
Manufacture 225.12, pp. 2228-2239, 2011.
[13] C. Telenko and C. Seepersad, “A comparison of the energy efficiency of
selective laser sintering and injection molding of nylon parts,” Rapid
Prototyping Journal 18.6, pp. 472-481, 2012.
[14] A. Drizo, and J. Pegna, “Environmental impacts of rapid prototyping: an
overview of research to date,” Rapid Prototyping Journal 12.2, pp. 64-
71, 2006.
[15] B. Stephens et al., “Ultrafine particle emissions from desktop 3D
printers,” Atmospheric Environment 79, pp. 334-339, 2013.
[16] Y. Luo et al. “Environmental performance analysis of solid freedom
fabrication processes,” Proceedings of the 1999 IEEE International
Symposium on Electronics and the Environment, pp. 1-6, 1999.
[17] M. Goedkoop et al. ReCiPe 2008: A life cycle impact assessment method
which comprises harmonised category indicators at the midpoint and the
endpoint level, Pré Consultants, 2009.
[18] M. Tabone et al., “Sustainability metrics: life cycle assessment and
green design in polymers,” Environmental Science & Technology 44.21,
pp. 8264-8269, 2010.
[19] M. Rossi et al., “Design for the Next Generation: Incorporating Cradleto-
Cradle Design into Herman Miller Products,” Journal of Industrial
Ecology 10.4, pp. 193-210, 2006.
[20] B. Evans, Practical 3D Printers, Apress, 2012.
[21] RepRap community, “Powder Printer Recipes,” RepRap Wiki. Accessed
Aug 24 2014 from http://reprap.org/wiki/Powder_Printer Recipes.
[22] O. Jolliet et al., “IMPACT 2002+: a new life cycle impact assessment
methodology,” International Journal of Life Cycle Assessment 8.6, pp.
324-330, 2003.