Water Vapor Plasma Torch: Design, Characteristics and Applications

The atmospheric pressure plasma torch with a direct current arc discharge stabilized by water vapor vortex was experimentally investigated. Overheated up to 450K water vapor was used as plasma forming gas. Plasma torch design is one of the most important factors leading to a stable operation of the device. The electrical and thermal characteristics of the plasma torch were determined during the experimental investigations. The design and the basic characteristics of the water vapor plasma torch are presented in the paper. Plasma torches with the electric arc stabilized by water vapor vortex provide special performance characteristics in some plasma processing applications such as thermal plasma neutralization and destruction of organic wastes enabling to extract high caloric value synthesis gas as by-product of the process. Syngas could be used as a surrogate fuel partly replacing the dependence on the fossil fuels or used as a feedstock for hydrogen, methanol production.




References:
[1] R. F. Ammerman, T. Gammon, P. K. Sen, J. P. Nelson, "DC-arc models
and incident-energy calculations," IEEE Trans. Ind. Appl., vol. 46, no. 5,
pp. 1810-1819, Sep. 2010.
[2] J. P. Trelles, C. Chazelas, A. Vardelle, J. V. K. Heberlein, "Arc plasma
torch modeling," J. Therm. Spray Technol., vol. 18, pp. 728-752, Dec.
2009.
[3] V. Grigaitien├À, V. Snapkauskien├À, P. Valatkevi─ìius, A. Tamo┼íi┼½nas, V.
Valin─ìius, "Water vapor plasma technology for biomass conversion to
synthetic gas," Catal. Today, vol. 167, no. 1, pp. 135-140, June 2011.
[4] K. Moustakas, D. Fatta, S. Malamis, K. Haralombous, M. Loizidou,
"Demonstration plasma gasification/vitrification system for effective
hazardous waste treatment," J. Hazard. Mater., vol. B123, pp. 120-126,
May 2005.
[5] H. Nishioka, H. Saito, T. Watanabe, "Decomposition mechanism of
organic compounds by DC water plasmas at atmospheric pressure," Thin
Solid Films, vol. 518, pp. 924-928, Aug. 2009.
[6] A. Shutze, J. Y. Jeong, S. E. Babayan, J. Park, G. S. Selwyn, R. F.
Hicks, "The atmospheric-pressure plasma jet: A review and comparison
to other plasma sources," IEEE Trans. Plasma Sci., vol. 26, no. 6, pp.
1685-1694, Dec. 1998.
[7] A. Bogaerts, E. Neyts, R. Gijbels, J. van der Muller, "Gas discharge
plasmas and their applications," Spectrochim. Acta B, vol. 57, pp. 609-
658, Dec. 2002.
[8] M. F. Zhukov, I. M. Zasypkin, A. N. Timoshewskii, B. I. Mikhailov, G.
A. Desyatkov, Thermal Plasma Torches. Novosibirsk, Nauka, 1999, pp.
21-288.
[9] H. Nishikawa, M. Ibe, M. Tanaka, T. Takemoto, M. Ushio, "Effect of
DC steam plasma on gasifying carbonized waste," Vaccum, vol. 80, pp.
1311-1315, Sep. 2006.
[10] G. Van Oost, M. Hrabovsky, V. Kopecky, M. Konrad, M. Hlina, T.
Kavka, "Pyrolysis/gasification of biomass for synthetic fuel production
using a hybrid gas-water stabilized plasma torch," Vacuum, vol. 83, pp.
209-212, Sep. 2008.
[11] B. Lemmens, H. Elslander, I. Vanderreydt, K. Peys, L. Diels, M.
Oosterlinck, M. Joos, "Assessment of plasma gasification of high caloric
waste streams," Waste Manage., vol. 27, pp. 1562-1569, 2007.
[12] A. Tamo┼íi┼½nas, V. Grigaitien├À, P. Valatkevi─ìius, "Creation of linear DC
plasma generator for pyrolysis/gasification of organic materials,"
Nukleonika, vol. 56, no. 2, pp. 131-135, 2011.
[13] M. F. Zhukov, "Electric Arc generators of thermal plasma: review," in
Thermal Plasma Torches and Technologies, vol. 1, O. P. Solonenko Ed.
Cambridge International Science Publishing, 2003, pp. 1-19.
[14] A. Tamo┼íi┼½nas, P. Valatkevi─ìius, V. Valin─ìius, V. Grigaitien├À, "Heat
transfer in the arc discharge channel stabilized with water vapor vortex,"
in Proc. 14th Minsk Int. Heat and Mass Transfer Forum, Minsk, 2012,
pp. 168-171.