Unsteady Flow Simulations for Microchannel Design and Its Fabrication for Nanoparticle Synthesis

Micro-mixers play an important role in the lab-on-a-chip applications and micro total analysis systems to acquire the correct level of mixing for any given process. The mixing process can be classified as active or passive according to the use of external energy. Literature of microfluidics reports that most of the work is done on the models of steady laminar flow; however, the study of unsteady laminar flow is an active area of research at present. There are wide applications of this, out of which, we consider nanoparticle synthesis in micro-mixers. In this work, we have developed a model for unsteady flow to study the mixing performance of a passive micro mixer for reactants used for such synthesis. The model is developed in Finite Volume Method (FVM)-based software, OpenFOAM. The model is tested by carrying out the simulations at Re of 0.5. Mixing performance of the micro-mixer is investigated using simulated concentration values of mixed species across the width of the micro-mixer and calculating the variance across a line profile. Experimental validation is done by passing dyes through a Y shape micro-mixer fabricated using polydimethylsiloxane (PDMS) polymer and comparing variances with the simulated ones. Gold nanoparticles are later synthesized through the micro-mixer and collected at two different times leading to significantly different size distributions. These times match with the time scales over which reactant concentrations vary as obtained from simulations. Our simulations could thus be used to create design aids for passive micro-mixers used in nanoparticle synthesis.





References:
[1] Vladimir Viktorov, “Numerical study of fluid mixing at different inlet flow rate ratios in tear drop and chain micromixers compared to a new H-C passive micromixer”, Engineering application of computational fluid dynamics, J., vol.10, no.1, pp.182-192, Feb 2016.
[2] S. Hossain, “Mixing Analysis of Passive Micromixer with unbalanced three split rhombic sub-channels.” J Micromachines., vol.5 no.1, pp.913-928, Oct 2014.
[3] M. S. Khalidha, “Comparative study on methods of Gold nanoparticles” Green and sustainable Chemistry J, vol., pp. 2012.
[4] S. Toghshi, “Size of Nanoparticles using a microfluidic device” of Chemical, Molecular, Nuclear, Material and Metallurgical Engineering J, vol 7., no., 2013.
[5] H. S. Heo, ”Enhancement of stirring in a straight channel at low Reynolds numbers with various block arrangements”, J of Mech. Sci. Technol. Vol. 19, pp.199-208, Jan 2005.
[6] W. Hengzi, “Passive mixing in microchannels by applying geometric variations” proc, In micromachining and microfabrication, .International society of Optics and Photonics, vol.4982, pp,282-289, Jan 2003.
[7] N. Rahim, ”Computational Fluid Dynamic Simulation of Mixing in Circular Cross Sectional Microchannel”, J., chemical engineering transactions, vol. 56, 2017.
[8] S. Das, “Numerical and experimental study of passive fluids mixing in micro-channels of different configurations”, J., Article in Microsystem Technologies Springer-Verlag GmbH Germany vol. 23, pp. 5977–5988, July 2017.
[9] G Karniadakis, “Microflows and Nanoflows Fundamentals and simulation”, Springer 2005.
[10] H. Sad Abadi, ”Uniform integration of gold nanoparticles in PDMS microfluidics with 3D micromixing”, Jof Micromech Microeng.vol.25, no. 9, Aug 2015.
[11] Camesasca M, “Staggered passive micromixers with fractal surface patterening” J of Micromech Microeng, vol.16, pp. 2298-2311, 2006.
[12] C. Wang, “Mixing of kiqyids using obstacles in Y type microchannels” J of science and Engineering, vol. 13, no 4, pp. 385-394, 2010.
[13] J. Kuncova-Kallio, ”PDMS and its suitability for analytical microfluidic devices” EMS Annual international conf, IEE, USA, pp. 6469 – 6472, Dec 2006.
[14] K. Efimenko, “Surface Modification of Sylgard-184 Polydimethylsiloxane Networks by Ultraviolet and Ultraviolet/Ozone Treatment”, J of Colloid and interface science vol., 254, pp 306-315 Oct 2002.
[15] Lung-Hsin Hung, Abraham Philip Lee, “Microfluidic devices for the synthesis of nanoparticles and biomaterials ”Journal of Medical and Biological Engineering, vol. 27, pp 1-7, nov 2006.
[16] Q. Zhang, ”In-situ synthesis of Polydimethylsiloxane – gold nanoparticles composite films and its application in microfluidic systems”, J of RSC, Lab on chip 2007.
[17] Byung. H. Jo, “Three Dimensional Microchannel fabrication in Polydimethylsiloxane Elastomer”, J of Microelectromechanical systems, vol 9, 2000.
[18] Q. Feng,”Microfluidic based high throughput synthesis of lipid-polymer hybrid nanoparticles with tunable diameters”, JBiomicrofluidics, vol. 9, June 2015.
[19] C. Yang, “Microfluidic assisted synthesis of silver nanoparticles chitosan composite microparticles for antibacterial applications”. J. pharmasutics, Elsevier, vol 410., pp 493-500, Aug 2016.
[20] Attila Olah, ”Hydophobic recovery of UV/Ozone treated Polydimethylsiloxane: adhesion studies and mechanism of surface modification ”, J of Applied surface science vol.23,pp. 410-423.,January 2005.
[21] Kee Suk Ryu, chang Liu “Precision Patterning of PDMS Thin Films:A New fabrication method and its applications”, J of Mechanical and Biological Engineering., springer link., pp 112-114, 2002.
[22] C. Fu, “A novel and simple fabrication of method embedded SU-8 microchannels by UV lithography”, J. Phys.: Conf. Ser. 34, pp 330-335., 2006.
[23] M. Amritkar, “Development of simulation tool for investigating effect of hydro active surface modifications on efficiency of passive micro mixer” (section 2 is taken from our own paper, submitted for publication)
[24] Q. Feng, ”Microfluidic based high throughput synthesis of lipid poly (lactic-co-glycolic acid) NP synthesis”. J. Biomicrofluidics, vol9, 5, June 2015.
[25] Vu Thi Thu, “Fabrication of PDMS based microfluidic devices: application for synthesis of Magnetic Nanoparticles” J of Elecronicmaterials, vol 45 no 5, 2016.
[26] H. Sad Abadi, ”Uniform integration of gold nanoparticles inPDMS microfluidics with 3D micromixing”, J. Micromech. Microeng., pp 1-7., August 2015.