Traditional Dyeing of Silk with Natural Dyes by Eco-Friendly Method

In traditional dyeing of natural fibers with natural dyes, metal salts are commonly used to increase color stability. This method always carries the risk of environmental pollution (contamination of arable soils and fresh groundwater) due to the release of dyeing effluents containing large amounts of metal. Therefore, researchers are always looking for new methods to obtain a green dyeing system. In this research, the use of the enzymatic dyeing method to prevent environmental pollution with metals and reduce production costs has been proposed. After degumming and bleaching, raw silk fabrics were dyed with natural dyes (Madder and Sumac) by three methods (pre-mordanting with a metal salt, one-step enzymatic dyeing, and two-step enzymatic dyeing). Results show that silk dyed with natural dyes by the enzymatic method has higher color strength and colorfastness than the pretreated with a metal salt. Also, the amount of remained dyes in the dyeing wastewater is significantly reduced by the enzymatic method. It is found that the enzymatic dyeing method leads to improvement of dye absorption, color strength, soft hand, no change in color shade, low production costs (due to low dyeing temperature), and a significant reduction in environmental pollution.





References:
[1] D. Cristea and G.Vilarem, “Improving light fastness of natural dyes on cotton yarn,” Dyes Pigm, vol. 70, no. 3, pp. 238-245, Aug. 2006.
[2] P. S. Vankar, R. Shanker, D. Mahanta and S. C. Tiwari, “Ecofriendly sonicator dyeing of cotton with Rubia cordifolia Linn. using biomordant,” Dyes Pigm, vol. 76, no. 1, pp. 207-212, Oct. 2008.
[3] S.M. Burkinshaw, and B. Bahojb-Allafan, “The development of a metal-free, tannic acid-based aftertreatment for nylon 6, 6 dyed with acid dyes—part 2: further studies,” Dyes Pigm, Vol. 59, no. 1, pp.71-97, Oct. 2003.
[4] S.M. Burkinshaw, and B. Bahojb-Allafan, “The development of a metal-free, tannic acid-based aftertreatment for nylon 6, 6 dyed with acid dyes. Part 4: tannic acid,” Dyes Pigm, Vol. 62, no. 2, pp. 159-172, Feb. 2004.
[5] S.M. Burkinshaw, and B. Bahojb-Allafan, “The development of a metal-free, tannic acid-based aftertreatment for nylon 6, 6 dyed with acid dyes—part 3: different enzymes,” Dyes Pigm, Vol. 60, no. 2, pp.91-102, Feb. 2004.
[6] Y. Kawahara, S.H. Nakajima, and H. Furuta, “Dyeing behavior of tannic acid-treated wild silk fibers with acid dyes,” Sen'i Gakkaishi, Vol. 49, no. 8, pp.444-447, Sep.1993.
[7] S.M. Burkinshaw, M. Paraskevas, “The dyeing of silk Part 2: Aftertreatment with natural and synthetic tanning agents,” Dyes Pigm, Vol. 88, no. 2, pp. 156-165. Feb. 2011.
[8] M. Feiz, S. Salimpour Abkenar, “Improvement in washfastness of dyed silk by aftertreatment with commercial syntan/metal salts,” pccc, Vol. 1, no. 1, pp. 27-36, 2008.
[9] M. Feiz and H. Norouzi, “Dyeing studies of wool fibers with madder and effect of different mordants and mordanting procedures on color characteristics of dyed samples,” Fibers Polym., Vol. 15, no. 12, pp. 2504-2514, Dec. 2014.
[10] M. Gias Uddin, “Effects of different mordants on silk fabric dyed with onion outer skin extracts,”J. Text. Vol. 2014, pp. 1-8, 2014.
[11] M. Gias Uddin, “Study on the color levelness of silk fabric dyed with vegetable dyes.” Sustainable Chem. Processes., Vol.3, pp. 10-13, Jul. 2015.
[12] P. Kubelka, F. Munck, “Ein Beitrag zur Optik der Farbanstriche,” Z. Tech. Phys. (Leipzig). Vol. 12, pp. 593-601, 1931.
[13] A.K. Samanta., P. Agarwal, S. Datta, “Studies on color-strength-related parameters and compatibility for dyeing of cotton fabric with binary mixtures of Jackfruit wood and other natural dyes,” J. Nat. Fibers, Vol. 6, no. 1, pp. 27-45, March. 2009.
[14] S. Salimpour Abkenar, M. Feiz, “Improvement of wash fastness and light fastness of metal complex dyes applied to silk using a syntan in conjunction with complexing agents and different enzymes,” in 9th Asian Textile Conference, Taiwan, 2007.