Thiosulfate Leaching of the Auriferous Ore from Castromil Deposit: A Case Study

The exploitation of gold ore deposits is highly dependent on efficient mineral processing methods, although actual perspectives based on life-cycle assessment introduce difficulties that were unforeseen in a very recent past. Cyanidation is the most applied gold processing method, but the potential environmental problems derived from the usage of cyanide as leaching reagent led to a demand for alternative methods. Ammoniacal thiosulfate leaching is one of the most important alternatives to cyanidation. In this article, some experimental studies carried out in order to assess the feasibility of thiosulfate as a leaching agent for the ore from the unexploited Portuguese gold mine of Castromil. It became clear that the process depends on the concentrations of ammonia, thiosulfate and copper. Based on this fact, a few leaching tests were performed in order to assess the best reagent prescription, and also the effects of different combination of these concentrations. Higher thiosulfate concentrations cause the decrease of gold dissolution. Lower concentrations of ammonia require higher thiosulfate concentrations, and higher ammonia concentrations require lower thiosulfate concentrations. The addition of copper increases the gold dissolution ratio. Subsequently, some alternative operatory conditions were tested such as variations in temperature and in the solid/liquid ratio as well as the application of a pre-treatment before the leaching stage. Finally, thiosulfate leaching was compared to cyanidation. Thiosulfate leaching showed to be an important alternative, although a pre-treatment is required to increase the yield of the gold dissolution.





References:
[1] Hendrix J., Is there a green chemistry approach for leaching gold. Papers in Sustainable Mining 2005, 2.
[2] Bas, A. D., Koc, E., Yazici, Y., Deveci, H., Treatment of copper-rich gold ore by cyanide leaching, ammonia pretreatment and ammoniacal cyanide leaching. Transactions of Nonferrous Metals Society of China 2014, 25, (2), 597-607.
[3] Habashi, F., Principles of Extractive Metallurgy. Paris, Vol. 2.
[4] Keskinen, S. Comparison of cyanide and thiosulfate leaching for gold production (A literature Review). Lappeenranta University of Technology, Lappeenranta, 2013.
[5] Muir, D. M., Alymore, M.G., Thiosulphate as an alternative to cyanide for gold processing - issues and impediments. Mineral. Process. Extr. MEtall 2004, 38, 170-179.
[6] Lidel, Handbook of non-ferrous metallurgy - Recovery of metals. New York, 1945.
[7] Oraby, E. Gold leaching in thiosulfate solution and its environmental effects compared with cyanide. Curtin University of Technology, Curtin, 2009.
[8] Senanayake, G., Gold leaching by thiosulphate solutions: a critical review on copper(II) - thiosulphate-oxygen interactions. Minerals Engineering 2005, 18, 995 - 1009.
[9] Ritchie, I. M., Nicol, M.J., Staunton, W.P., Are there realistic alternatives to cyanide as a lixiviant for gold at the present time? Cyanide: Social and Economic Aspects; 2001, 427-440.
[10] Senanayake, G., Gold leaching by copper(II) in ammoniacal thiosulphate solutions in the presence of additives. Part I: A review of the effect of hard-soft and Lewis acid-base properties and interactions of ions. Elsevier, Hydrometallurgy 2012.
[11] Grosse, A. C., Dicinoski, G.W., Shaw, M.J., Haddad, P.R., Leaching and recovery of gold using ammoniacal thiosulfate leach liquors (a review). Hydrometallurgy 2002, 69, 1-21.
[12] Zipperian, D., Raghavan, S., Wilson, J., Gold and silver extraction by ammoniacal thiosulfate leaching from rhyolite ore. Hydrometallurgy 1988, 19, 361-375.
[13] Hemmati, M., Hendrix, J.L., Nelson, J.H., Milosavljevic, E.B., Study of the thiosulfate leaching of gold from carbonaceous ore and the quantitive determination of thiosulfate in the leached solution. In Extraction Metallutgy '89, Metallurgy, I. M., Ed. London, UK, 1989; pp 665-678.
[14] Zhou, G. H., Li, H.R., Rong, Q.X., Gold extraction by ammoniacal thiosulfate leaching from a gold ore containing copper at room temperature. Multipurpose Utrilisation of Mineral Resources 1999, 5.
[15] Fujita, T., Yen, W.T., Jeyadevan, B., Takano, S., Toyata, E., Kuzuno, E., In Gold leaching from electric machine part scraps using thiosulfate or hypochlorite., East-Asian Resources Recycling Technology, Kunming, China, 1997; Kunming, China, 1997; pp 36-45.
[16] Abbruzzese, C., Fornyari, P., Massidda, R., Veglio, F., Ubaldini, S., Thiosulfate leaching for gold hydrometallurgy. Hydrometallurgy 1995, 39.
[17] Valance, J. C., M., Bairon, M.C., Shepherd, T. J., Naden, J., Role of aplitic magmatism and C-rich rocks in the Castromil deposit (north Portugal). European current research on fluid inclusions 2001.
[18] Robinson, J. J., The extraction of gold from sulphidic concentrates by roasting and cyanidation. J.S. African Institute Mineral Metallurgy 1988, 88, 117-130.
[19] Nagy, I., Mrkusic, P.G., McCulloch, H.W., Chemical treatment of refractory gold ores.; National Institute for Metallurgy: Johannesburg, 1966.
[20] Hansen, K. R. N., Laschinger, J. E., The roasting of refractory gold ores and concentrates.; National Institue for Metallurgy: Johannesburg, 1966.
[21] Feng, D., van Deventer, J. S. J., Oxidative pre-treatment in thiosulphate leaching of sulphide ores. International Journal of Mineral Processing 2010, 94, 28-34.